PROVISION OF CERTAIN LBW, REV, MW AND SPECIAL REPAIR WORKS IN THE AREA OF AGE B/R (EAST) AND AGE E/M (NORTH) UNDER GE (NORTH) PUNE

Amount

Excavation in trenches not exc. 1.5 m wide and not exc. 1.5 m in depth for foundation, sewage line, cable etc. or for shafts, wells, cesspits, manholes, pier holes, pole etc. n. exc 10 sq m on plan and getting out in soft/ loose soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick with soils complete all as specified and as directed.

Excavation in post holes ( or similar holes) each n.exc. 0.50 Cum, getting out, returning, filling in and ramming earth or borken rubble mixed with earth around, in layers n.exc. 25 cm thick in soft/ loose soil complete all as specified and as directed.

Removing of excavated material (soil) to distance not exc.50metres and deposited where directed at a level not exc.1.5 metre above the starting point complete all as specified and as directed.

Removing of excavated material (soil) to distance exceeding 150m and not exc.250metres and deposited where directed at a level not exc.1.5 metre above the starting point complete all as specified and as directed.

Material and labour for hardcore broken stone or boulders of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified and as directed.

Material and labour for moorum/ red bazri filling under floors with moorum brought from outside MD land, laid in layers n. exc 15 cm thick spread, levelled and rammed including watering etc complete all as specified and directed.

Material and labour for PCC (1:4:8) type D-2 (using 40 mm graded broken stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

Material and labour for PCC (1:3:6) type C-2 (using 40 mm graded broken stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

Material and labour for PCC (1:3:6) type C-1 (using 20 mm graded broken stone aggregate) as in coping of poles, stays etc. including use and waste of form work, surface finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for PCC (1:2:4) type B-1 (using 20 mm graded broken stone aggregate) as in foundation, caps and bases of post holes etc. complete all as specified and as directed.

Material and labour for providing 25mm thick precast cement concrete (1:2:4) type B-0 (using 12.5mm graded broken stone aggregate) (measured solid) as in louvers and jallies, including all mouldings, set in cement mortar (1:4) complete all as specified and as directed.

Material labour for RCC (design mix) M-25 (using 20mm graded broken stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Material and labour for RCC (1:2:4) type B-0 (using 12.5 mm graded broken stone aggregate) as in lintels upto 1.5m clear span, seismic and other similar bands, cills, plinth courses, roof kerbs or mud stops, parapets, coping, benching, coping, hold fast blocks, bed blocks/ bed plates, kerbs for interlocking tiles etc. including weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specified and as directed.

M&L Brick work with fly ash bricks, old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 complete all as specified and directed.

M&L Brick work with fly ash bricks, old size bricks, straight or curved on plan to any radius, in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.

Material and labour for formwork to sides and soffits of floor or roof beams, lintels, cantilevers, shelves, bands, including supports, overhangs, etc. for fair finished flat surfaces of concrete complete all as specified and as directed.

Supply and fix for 2nd class hard wood boarding, 20mm thick, planed one side with butt joints and fixed with nails in any situation as in eaves board/ fascia of roof complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frame) area not exc.1.5 sqm each complete all as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frame) area exc.1.5 sqm and not exc.4 sqm each complete all as directed

Taking down shutters of any description, area exc.1 sqm and not exc. 2 sqm each complete all as directed.

Supply and fix in reapir tubular towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges including brackets with brass screws and wooden plugs complete all as specified and as directed.

Supply and fix 4mm dia galvanised steel wire,150x100mm mesh, made up into mattresses or cages, lapped,wired and laid in position, including closing after filling complete all as specified and as directed.

Supply and fix in repair for stainless steel wire cloth 0.36 mm nominal dia of wire, average width of aperture 1.40 mm, fixed with stainless steel wire staples, wooden beads complete all as specified and as directed

Supply and fix for mild steel work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 22.5cm and n exc 30cm long, diameter of neck 11 to 15mm complete all as specified and as directed

Material and labour for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Material and labour for mild steel TMT bars, 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia. or securing with clips complete all as specified and as directed.

Material and labour for rolled mild steel sections Fe - 410 W(Gde E-250) quality A in joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) including drilling holes, welding etc. all as specified and as directed

Supply and fix for rolled mild steel section Fe 410-W(Gde-E-250) quality A as in main and cross beams, hip and jack rafters, purlins connected to common rafters and running rails and guides for sliding doors, column posts, wind ties, fixed with angle cleats or other connecting plates, drilled for fixing all as specified and directed.

Material and labour for rolled mild steel Fe 410-W(Gde-E-250) quality-A in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and as directed.

Supply and fix for rolled mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, etc. conforming Fe 410-W(Gde-E-250) quality-A complete all as specified and as directed.

Supply and fix for mild steel work in tubular trusses, main columns, posts, for structural work including special shaped washer etc. complete using hollow mild steel sections of square or rectangular tubes conforming to IS: 4923-1997 grade St.-240 fixed with angle cleats or other connecting plates complete all as specified and as directed.

Fixing for chain link fencing including line wires, any mesh, size and type to any type of standards, rail, straining bolts etc. including provision of binding wire, complete all as specified and as directed.

Supply only chain link MS galvanisd fencing, any size or type weighting not less than 2.80 Kg/Sqm complete all as specified and as directed. Note: (i) The weight per Sqm shall be assessed through BOO ordered by GE.

Supply and fix for aluminium anodised louvered ventilator with adjustable louvers using standard aluminium section as specified including glass 4mm thick frosted and stainless steel wire mesh 0.36mm dia wire and 1.40mm aperture etc complete all as specified and directed.

Supply and fix for aluminium anodised three track sliding window with two glazed shutters, one shutter with and including 4mm thick tinted glass of modiguard and one shutter with and including stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing, handle, locks, PVC rubber lining of transparent colour etc complete all as specified and as directed. Catalouge numbers of Jindal company or equivalent make sections : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604.

Supply and fix for aluminium powder coated partition using ‘Jindal’ aluminium SP/ DP section or equivalent make as specified with 5mm thick tinted glass, PVC rubber beading/12mm thick prelaminated particle board fixed with glazing clips etc./ both complete all as specified and as directed. Sections : SP (Single partition) - 20033, DP (Double partition) - 20034, Glazing clips - 4407

S&F aluminium powder coated snap grid grill of of design DG-104 pattern made out of 10mm dia alumimium rod fixed with and including standard aluminium frame of F section of size 23.4x15.3x1.4mm thick all as per manufactures instruction complete all as specified and as directed

Supply and fix for powder coated aluminium single leaf, two panels, openable door, half glazed on top using 5.5mm thick tinted glass panes fixed with PVC rubber bidding and glazing clips and bottom both side prelaminated particle board 12mm thick fixed, alongwith supplying and fixing aluminium body hydraulically regulated door closer, designation No 2 universal type, suitable for sheet width 701 to 850mm of weight between 36 to 80 kg ,door lock, handle,hanged on aluminium door floor spring, pivots etc etc using aluminium sections etc all as specified and directed.Note :- Catlouge numbers of Jindal or equivalent company. (i) Top-19528 (ii) Middle-19575 (iii) Bottom-19530 (iv) Vertical-19526 (v) Glazed clips section No. 19381 and 19352 (vi) 1'' interlock (20939) (vii)1'' handle(20602) .

Supply and fix for 0.50mm thick pre-painted galvalume aluminium zinc coating (AZ-150) GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws with side lap complete all as specified and as directed.

Supply and fix for 0.50mm thick pre-painted galvalume aluminium zinc coating (AZ-150) GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws with side lap complete all as specified and as directed.

Material and labour for 9mm thick plywood, grade BWR, type BB, fixed with fevicol and nails for working table/ storage almirah, cabinets, cupboards, racks and wall panelling to the size and pattern as directed including fixing on walls, floors etc.complete all as specified and as directed.

S & F Shelves made of HDHMR (high density high moisture resistance) board manufactured with hard wood, prelaminated both sides white in colour 18 mm thick water resistant, termite resistant, duly edge banded with PVC taping 0.8 mm thick, cut to shape & size of shelves complete all as specified and directed. Make: Action tesa, Century, Kitply

S & F 18 mm thick UV coated exterior grade MDF board duly edge banded with 0.8 mm thick PVC taping, fitting of shutters shall be fixed as approved by GE suitable for cup board etc. including taking down with existing one complete all as specified and directed. Make: Action tesa, Century, Kitply

Supply and fix for tiled false ceiling of size (600x600)mm in true horizontal level suspended on inter locking Gyproc Matrix metal grid of hot dipped galvanized steel sections. It consists of main "T" runner of size 24x38x0.3x 3600mm, cross "T" of size 24x25x0.3x 1200mm, secondary cross "T" of size 24x25x0.3x 600mm and PPGI wall angle of size 24x24x0.4x 3000mm. Bottom exposed capping of width 24 mm of all T-sections shall be of 0.25mm thick PPGI. PPGI wall angle 24x24x0.4x 3000mm {Material-GI(IS513),YS-280Mpa,Finish-Galvanised 90GSM(IS277)} is fixed along the perimeter of the ceiling to Walls, partitions or columns etc., with wooden screws at 300mm centers or Hilti HPS 6 x40mm placed at 600 mm c/c. Gyproc ® soffit cleat 27x37x25x1.6mm {GI(IS513)YS-260Mpa,Finish-Galvanised 120GSM(IS277) } is fixed with Gyproc® Rawl Plug- Ø8x45mm {Material-IS 513 CR2 grade, Zinc coating (7 to 8 microns) pull out load- 6.8kN for M30 concrete grade} creating 1200mm x 1200mm grid. Main-T runners 24x38x0.3x3600mm are then suspended at 1200mm c/c from ceiling using 4mm zinc electroplated butterfly level clips of size 85x30x0.8mm spaced at maximum 1200mm center to center along main T and not more than 150mm from spliced joints.

The last hanger at the end of each main runner should not be greater than 600mm from the adjacent wall/ hung from ceiling using 2mm dia. G.I. suspension wires and 'J' bolts, washers, nuts spaced at 1200 mm both ways as per site requirement. 24x25x0.3x 1200mm cross T {GI(IS513)YS-280Mpa,Finish-Galvanised 120GSM (IS277) } is interlocked between the main T at 600mm center to center to form a grid of 1200x 600 mm and then secondary cross “T" 24x25x0.3x600mm {GI(IS513)YS-280Mpa,Finish-Galvanised 120GSM(IS277) } is then interlocked at middle of the 1200x600mm grid to form grids of 600x600mm. Cross Tees at the ends having length more than 600mm are to be supported independently. Finally 9.5mm thick square edge Gyproc Polyshield Gypsum tile of size 595x595mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges, so as to make the tile a completely sealed unit, is placed in the grid including making niches for fans/ light complete all as specified and as directed. Make: Gyproc-Saint Gobain of equivalent or Armstrong, Diaken, New Age (ACE) as approved by GE.

Material and labour for hand cut kota stone slab 20 to 25mm thick in flooring, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab, laid over and including screed bed 20mm thick in cement mortar (1:6), including rubbing and mirror polishing complete all as specified and as directed.

M&L for Cement concrete 1:3:6 type C-2 (using 40mm graded agg) as in plinth protection, 75 mm thick and finished even and smooth without using extra cement all as specified and as directed

Material and labour 75mm thick PCC (1:3:6) type D2 (using 40mm graded broken stone aggregate) as in sub base complete all as specified and as directed.

Material and labour 75mm thick PCC (1:4:8) type D2 (using 40mm graded broken stone aggregate) as in sub base complete all as specified and as directed.

Material and labour 40mm thick PCC (1:2:4) type B1 (using 20mm graded broken stone aggregate) as in floor topping, finishing the surface even and smooth withou using extra cement complete all as specified and as directed.

M & L Glass dividing strips, width of strip 38mm, 3 mm thick , inserted in position, conform to design complete all as per specified and as directed.

M&L for Glazed coloured ceramic tiles in vertical surface 400mmx300mmx7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over and including rendering of 10 mm thick in cement mortar 1:3 including dismantling existing tiling, cement mortar rendering (but not backing), removing rubbish off the premises complete all as specified and directed.

M&L non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:4 and demolition of existing tiles complete all as specified.

M&L non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:4 and demolition of existing tiles complete all as specified.

Material and labour for Textured heavy duty tiles of size 300mm x 300mm x 10 mm thick as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and shade/ pattern as approved by GE over and including 15mm thick screed bed in CM (1:4) complete all as specified and as directed. Make: Johnsun Endura or equivalent of Kajaria/ Nitco as approved by GE.

Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brickwork or concrete surfaces finished even and smooth without using extra cement with sponge finish complete all as specified and as directed.

M&L for 15mm thick cement plaster in CM 1:4 on bricks on concrete surfaces finishing the surfaces even and smooth without using extra cement with two coats of exterior acrylic emulsion paint on new surface all as specified.

M&L for 15mm thick cement plaster in CM 1:6 on bricks on concrete surfaces finishing the surfaces even and smooth without using extra cement including taking down existing plaster with two coats of OBD of any tint over a with putty on new surface all as specified and as directed.

M&L for 15mm thick cement plaster in CM 1:4 on bricks on concrete surfaces finishing the surfaces even and smooth without using extra cement including taking down existing plaster with two coats of cement base paint on new surface all as specified and as directed.

Material and labour for complete removal of existing treatment on walls, preparation of surfaces and make the surfaces free from loose particles, oil stains etc and applying two coats of oil bound distemper complete all as specified and as directed.

Material and labour for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of cement primer complete all as specified and as directed

Material and labour for preparation of new untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Material and labour for preparation of new steel or iron surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and as directed.

Material and labour for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Supply and fix for 15mm bore steel water tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors including taking up or down steel tubing with all fittings and connections complete all as specified and as directed.

Taking down old unserviceable CI/GI/RCC Pipe line of any size complete all as specified and as directed.

Labour only for Cutting/Chamfering and screwing Cast Iron pipe 80mm bore and reducing to required length in positionfor insertion of new tees, branches, etc (Each cut measured) complete all as specified and as directed.

Material and labor for CI fittings such as Bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs etc for spigot and socketed CI pipes of size upto 150mm bore complete all as specified and as directed.

Supply and fix in repairs Cast iron pipe 80mm bore with spigot and socket ends centrifugally cast. Class LA,in any length,laid in trenches complete all as specified and as directed.

Supply and fix in repairs 80mm bore Rubber gasket joint for cast iron pipe complete all as specified and as directed.

Supply and fix in repairs mild steel connecting pieces one end flanged and other threaded incliding two coat of anticorrosive paint and taking up/down old unserviceable connecting complete for the size of pipes upto 150 mm bore complete all as specified and as directed.

Supply and fix in repairs 80mm bore Sluice valve PN1.6 confirming to IS 78/IS 14846-2000 flanged and s/s spindle with cap and handle opening arrangment complete inclding taking down existing unserviceable sluice valve complete all as specified and as directed.

Dismantling and removing damaged valve chamber brick masonary, PCC coping,pits of valve chambers and removing from site to a distance exc 50 meter but not exc 100 meter complete all as specified and as directed.

Material and labor for Valve Chamber of size 900mm X 600mm X 1000mm (internal) with fly ash brick masonary 230mm thick in CM 1:6, PCC 1:4:8 type, D2 foundation 75 mm thick, finished fair and even, PCC 1:2:4,B1 coping 150mm thick on top of brick wall for fixing chamber cover,10mm thick cement morter 1:4 plaster on exposed surface of brick wal (both internal and external) mild steel cover of 3.00mm thick plate including mild steel angle iron 40x40x6mm size frame fixed to PCC coping with same size of angle iron hold fast and necessary handle and locking arrangments,metal surface duly painted with black bituminous paint over acoat of red oxide primer and finishing the masonary/concrete surface with three coat of white wash complete all as specified and as directed. (Note-Rate quoted are including Excavation and earth work)

Supply and fix in repairs, chromium plated long body bib cock with wall flange 15mm dia as per Cat No. CON-107KN of make Jaquar ‘CONTINENTAL' series or or equivalent of CERA, Prayag as approved by GE complete all as specified and as directed.

Supply and fix in reapir pillars tap for 15mm bore pipe, cast copper alloy, with capstan heads, chromium plated, cast copper alloy, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed.

S&F in replacement 15mm dia angle stop valve with flange quarter turn chromium plated cast copper alloy ISI marked, high pressure screwed down complete all as specified. Make: Cera or of equivalent make as per Appx 'A' as approved by GE.

Supply and fix in repairs brass chromium plated quarter turn wall mixer with provision for overhead shower complete with wall flange with 115mm long bend pipe on upper side, connecting legs and wall flanges omplete all as specified and as directed.Make Cera or of equivalent make as per Appx 'A' as approved by GE

Supply and fix in repair cast copper alloy chromium plated shower arm 225mm long with flange complete all as specified and as drected. Make: Prayag Cat No. BOS-49 or of equivalent make as per Appx 'A' as approved by GE.

Supply and fix stop valves for 15mm bore pipe, with wall flange, fancy type, chromium plated, cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.

Supply and fix for hand shower (health faucet) with 1 metre long easy flex tube in chrome finish & wall hook, Cat No. ALD-565 of make Jaquar or equivalent as per Appx 'A' as approved by GE complete all as specified and as directed.

S&F in repairs Two way bib tap with wall flange quarter turn 15mm dia long body fancy type brass CP screwed for iron pipe or brass ferrule complete fixed in repair and all as specified and as directed Make Cera or of equivalent make as per Appx 'A' as approved by GE.

S&F in repairs stainless steel toilet paper holder recessed type ,Cat No. AHS-1551 of make Jaquar or equivalent of make as per Appx 'A' as approved by GE all as specified and as directed.

Supply and fix for grating doom round 100mm dia of PTMT (minimum weight 25gms) complete all as specified and as drected.

Supply and fix in repair for PVC (SWR) pipe 110mm bore single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) pipe 110mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) pipe 75mm bore single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) pipe 75mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) bends any radius of 110mm bore complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) bends any radius of 75mm bore complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) junction single, (single T) equal or unequal for 110 mm bore pipes with access door complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) junction single, (single T) equal or unequal for 75mm bore pipes with access door complete all as specified and as directed.

Supply and fix in reapir for PVC (SWR) vent cowl for 75mm bore pipe complete all as specified and as directed.

Material and labour in repair for cast iron floor trap, with grating of diameter of outlet 75mm including jointing to waste pipe fixed in PCC (1:2:4) type B-1 (using 20mm graded broken stone aggregates) complete all as specified and as directed.

Material and labour for PVC (SWR) gully trap 125/110 mm setting and jointing with solvent cement complete all as specified and as directed.

Supply and fix in repair for vitreous china European type wash down water closet pan, (Pedestal pattern) white with P or S trap including plastic water closet white closed pattern with flat bottom and cover with mild steel chromium plated hinging device and fixing bolts, necessary inlet and outlet connections including PVC low level flushing cistern 10 litres capacity, valveless, syphonic action type, white with inlet, ball valve, float and handle including brackets, PVC jet, PVC connection 450/600mm long with PTMT nuts and PVC flush pipe 32mm dia including making good complete all as specified and as directed.

Supply and fix for vitreous china wash hand basin, white, size 550 mm x 400 mm flat back excluding taps but including CI brackets, chromium plated brass waste coupling and other fittings, PVC waste pipe 32mm dia, cutting for and pinning in ends of bracket or errecting stand complete all as specified and as directed.

Supply and fix brass chromium plated fancy type shower rose 150mm size round with swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed. Make Jaquar or of equivalent make as per Appx 'A' as approved by GE.

Demolition of brick work/ precast concrete block walling/ boulder masonary, built in cement mortar or cement lime mortar including all quoins, pillars etc. complete all as directed.

Dismantling of stone slabs, chequered tiles, interlocking tiles of any description or thickness in floor, apron etc., laid bedded and pointed in any mortar complete all as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as directed.

Dismantling timber scantlings, framed work, as in fillets, rails, posts, rafters, purlins etc. under 40 sq. cm in section, in any position complete all as directed.

Dismantling wooden boarding/ plywood of any description and any thickness including fillets fixed in any position with nails complete all as directed.

Dismantling battens for tiles, shingles etc. of any size including tiling fillets spaced exceeding 15cm complete all as directed.

Dismantling plain or corrugated steel sheeting any gauge, thickness sheets including Nainital or similar pattern roof coverings/ galvalume/ aluminium sheeting complete all as directed.

Dismantling single layer Mangalore pattern or similar tiles in roofing complete all as directed.

Dismantling of wall/ceiling board/POP ceiling of any description and any thickness including cover fillets/ grid etc complete all as directed.

Taking down/ out unserviceable LT cables of any cross sectional area and connections and joints including pipes, bricks etc of any description laid in trenches or fixed with walls/ poles, complete all as directed. Note: Excavation and earth work shall be measured and paid separately.

Supply, laying and testing for LT XLPE UG cable insulated screened PVC bedded galvanised steel strip or wire armoured, heavy duty electric power cables with stranded aluminium conductor 1100 volts grade with cable glands, lugs etc laid in trenches, fixed on wall/ pole including brass cable glands, clamps etc. of size 10 Sqmm 2 core cable complete all as specified and as directed. Note: Excavation and earth work, sand cushioning, brick protection, GI pipe shall be measured and paid separately.

All as per serial item No.111 here-in-before but for 10Sqmm 4 core cable.

All as per serial item No.111 here-in-before but for 6Sqmm 2 core cable.

All as per serial item No.111 here-in-before but for 16Sqmm 4 core cable.

Supply and Laying 40 mm outer dia double walled corrugated (DWC) HDPE duct Pipe conforming to IS-:16205 part 24 2017, PE 63 of pressure rate 4 Kg/sq.cm with antirodent and non flame propogating properties of approved colour complete with fittings for cable protection all as specified and as directed

Taking down carefully unserviceable point wiring of any description/ type/ size of light/ fan / tube/ power / two way/ bell etc. on TW batten/ conduit/casing caping including removal of batten/ conduit/ casing caping/ gutties/ wooden boards/ switches/ sockets/ regulators/ holders/ ceiling roses/ call bells/ light fittings etc. for taking credit and making good the disturbed surfaces of wall/ ceiling so as to match with the existing finishes complete all as directed. Note: Taking down of seviceable fittings and fixtures shall be measured and paid separatey.

Taking down the existing unserviceable main switch/ cut out/ MCB DBs/ sheet metal enclosure of any type/ capacity/ description as existing at site including MCBs any type/ capacity and making good the disturbed surfaces of wall/ ceiling to match with the existing finishes complete all as directed.

Taking down the existing unserviceable street security/ flood light fitting any type/ capacity from pole including disconnecting and removing pipe bracket etc. and making good the disturbed surfaces of wall/ ceiling to match with the existing finishes complete all as directed.

Taking down the existing unserviceable tube light, decorative wall mounted, bulk head, batten aluminium, bollard light fitting, down lighter any type/ capacity and making good the disturbed surfaces of wall/ ceiling to match with the existing finishes complete all as directed.

Material and labour for point wiring using approved colour coding as per IS, with multistranded FRLSH copper conductor 1.5 Sq. mm (nominal area), two single core PVC insulated and unsheathed multistranded cable 1100 volts grade ISI-694 marked through and including heavy duty ISI marked, 20 mm dia rigid PVC conduit of white/ ivory/black colour on pressure patti with welding on channel including all accessories in wall/ ceiling/ chanel etc, with GI terminal sunken boxes 1.2mm thick 60mm deep of suitable size as per site requirement, covered with modular white cover plate with frame suitable for housing modular switches, sockets, regulators etc. including PVC insulated multistranded FRLSH copper conductor 1.5 Sqmm (nominal area) single core cable as earth continuity conductor and connecting to the common earth dolly for one light point controlled by one, one way switch 5/6 Amps complete all as specified and as directed.

All as per serial item No.120 here-in-before but point wiring for one exhaust fan/ wall fan point controlled by one, one way switch 5/6 Amps and regulator.

All as per serial item No.120 here-in-before but point wiring for one 3 pin 5/6 Amps socket outlet controlled by one switch on same board.

All as per serial item No.120 here-in-before but point wiring for one 3 pin 5/6 Amps socket outlet controlled by one switch on independent board.

All as per serial item No.120 here-in-before but with FRLS copper conductor 2.5 Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded cable 1100 Volt grade ISI-694 marked including PVC insulated multistranded FRLSH copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor for 3 pin 15/16 Amps socket outlet on independent board.

All as per serial item No.120 here-in-before but point wiring for one 3 pin 5/6 Amps socket outlet controlled by one switch on independent board.

Supply and fix for modular switch, one way 5/6 Amps, 1 module complete all as specified and as directed.

Supply and fix for modular switch, one way 6 Amps, 1 module including taking down of existing complete all as specified and as directed.

Supply and fix for modular switch, one way, 15/16 Amprs, 1 module complete all as specified and as directed.

Supply and fix for modular socket outlet multi purpose 2 & 3 pin 5/6 Amps, combined 2 module complete all as specified and as directed.

Supply and fix for modular socket outlet multipurpose, 3 pin 5/6 Amps and 3 pin 15/16 Amps, combined 2 module complete all as specified and as directed.

Supply and fix for sheet metal enclosures single pole and neutral with a two pin and earth plug top and socket complete with one MCB DP 20 Amp complete all as specified and as directed.

Supply and fix for sheet metal enclosure MCB DB SPN 4 way with 200 Amps rated bus bar 240 volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonry etc and making good of disturbed surface to match with existing colour of wall, connecting complete all as specified and as directed.

Supply and fix for sheet metal enclosure MCB DB SPN 2 way without bus bar 240 volts single door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonry etc and making good of disturbed surface to match with existing colour of wall, connecting complete all as specified and as directed.

Supply and fix for MCB SP rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA 'C' curve complete all as specified and as directed.

Supply and fix for MCB SPN rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA 'C' curve complete all as specified and as directed.

Refixing only old serviceable MCB SP/ SPN/ TPN in DB of any capacity duly cleaning including necessary electrical connection with proper size of copper wire etc. complete all as specified and directed.

Supply and fix for ceiling rose, 3 terminals, PVC/ polycarbonate type, isolated body including PVC box 3" round type complete all as specified and as directed.

S & F wall mounted LED 20 watts, 4 feet light fitting, warm white in colour, 230 volts with lumens out put not less than 2000 lumens with aluminium extruted channel, powder coated with diffuser for glare free light complete with accessoriesl provided for efficient heat dissipation and intregrated electronic driver connector block etc complete internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including necessary LED tube 4' x 20 watts complete all as specified and as directed. Make : Shakti Fittings and Fixtures Cat Part No SZSLAMX020 or Bajaj, Philips, Wipro, Havells, Syska, Jaquar

Supply and fix for recessed mounted low depth LED luminaire 2'x2' square LED panel 36 watts aesthetically designed and 4x1 flat panels to enhance the delight of occupants with classic design and glare free soft illumination operating voltage 140-270 volts, AC, 50 Hz all as per Cat No.BZRSQL 36W GZ1 WH of make Bajaj or equivalent of make Philips/ Wipro/Jaquar/ Crompton as approved complete all as specified and as directed.

Supply and fix for recessed mounted low depth LED luminaire 2'x2' square LED panel 36 watts 596x596x9mm size sleek design aluminium housing, polycarbonate diffuser white powder coated finish operating voltage 140-270 volts, AC, 50 Hz all as per Cat No.BARSQL 36W NW of make Bajaj or equivalent of make Philips/ Wipro/Jaquar/ Crompton as approved complete all as specified and as directed.

Supply and fix Vertical postion factory made steel tubular LED Column/Pole light of 20 Watt having Decorative fixture Die cast aluminium housing Glass diffuser IP43 which provide uniform light distribution complete all as specified and as directed. Cat No.Monaco product code 340.PE8.NGG of make Jaquar or equivalent of make Philips/ Wipro/Jaquar/ Crompton as approved by GE.

Supply and fix for energy saving new generation environmental friendly long life versatile pressure die aluminium IP-66 for security light fitting luminaire of capacity 25 watt with high power LEDs as light source and electronic driver with lumens out put not less than 2500 lumens, with prewired all as per Cat No. BCLST 25 W LED I of make Bajaj, Philips Cat No. BRP042 or equivalent of make Wipro/ Havells/ Crompton as approved, necessary mounting arrangements and provision of 2.5 Sqmm 3 core copper conductor cable multistranded from ceiling rose to light fitting including 40mm dia 1.5 metres long GI pipe medium grade bracket of suitable shape with clamps made out of MS flat iron of size 40mm x 6mm, nuts, bolts complete all as specified and as directed.

S & F for Energy saving new generation environmental friendly LED security light luminaire with long life versatile pressure die-cast housing with toughened glass and individual LEDs with secondary optics and IP 66 protection with high power LEDs as light source and electronic driver of capacity 90 watts with lumens out put not less than 9000 lumens with pre wired and necessary mounting arrangementsnd provision of 4 sq mm twin core copper conductor cable multi stranded from fitting to junction box including necessary GI pipe medium braket of required dia 1.5 mtr long bend to required shape with suitable with MS clamps made out of flat iron of size 40 x 6 mm - 02 sets, bolt & nuts complete all as directed by Engineer- in-charge. Make :- Bajaj Cat No BRTFG 90W LED WW or its equvalent in Philips, Wipro.

Supply and fix for energy saving new generation environmental friendly long life versatile presure die cast housing and heat sink in aluminium extrusion IP 66 flood light fitting luminaire 60watts with secondary optics, high power LEDs as light source and electronic driver of capacity 60 watts with lumens out put not less than 6000 lumens,with pre wired suitable for sports lights complete all as per Cat No.BJFL 60W LED of make Bajaj or equivalent of make Philips, Wipro, Havells, Syska, Jaguar as approved and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed.

Supply and fix for energy saving new generation environmental friendly long life versatile presure die cast housing and heat sink in aluminium extrusion IP 66 flood light fitting luminaire 120watts with secondary optics, high power LEDs as light source and electronic driver of capacity 120 watts with lumens out put not less than 12000 lumens,with pre wired suitable for sports lights complete all as per Cat No.BARFEG 120W LED of make Bajaj or equivalent of make Philips, Wipro, Havells, Syska, Jaguar as approved and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed.

Supply and fix for LED post top lantern 40 watts light fitting warm white made of cast aluminium spigot housing with decorative opal acrylic diffuser with IP 65 protection complete with all accessories, fixed on GI pipe medium grade 50mm bore, of suitable height complete all as specified and as directed. Make: Bajaj, Cat Part No.BGCL 40W LED WH, Jaquar Cat Part No. LBLD04R108XW LED or equivalent of make Philips, Wipro, Havells, Crompton, as approved.

Supply and fix for LED post top lantern 30 watts light fitting made of Die cast aluminium housing Heat resistant toughened glass (clear diffuser) with IP 65 protection complete with all accessories, complete all as specified and as directed. Make: Jaquar Product code No.LGTP02X030XWLED or equivalent of make Philips, Wipro, Havells, Crompton,as approved.

S & F for Integral decorative LED bollard with polycarbonate diffuser square shaped with IP 65 protection suitable for 9 watts LED bulb elecrical connections complete as all specified and as directed. Make: Bajaj Cat part No BGBOS 600 9W LED, or its equavalent in Philips, Wipro.

S & F for Integral decorative LED bollard warm white in colour with polycarbonate diffuser square shaped with IP 65 protection suitable for 8 to 10 watts LED bulb and provision with necessary MS base box made out of MS sheet of 2 mm thick of suitable size abbended in PCC 1:2:4 base, elecrical connections with adequate size complete as all specified and as directed. Make: Bajaj Cat part No BGBOL 605 9W LED, Crompton cat No. MAYAI LBLA1-10-CDL, Havells cat No. LHENAXP7PZ6K008 (BAMBOO) or its equiavalent in Philips, Wipro.

S & F for LED garden bollard12 watt light fitting New generation, energy saving, environmental friendly, long life aesthetically designed aluminium landscape luminaire for diffused lighting with high power LED as light source one meter long housing with decarative opal acrylic diffuser with IP 65 protection complete with all accessories fixed on ground including taking down of old unserviceable one complete all as specified and directed. Make : Havells Cat No. BAMBOO BL8WLED857 PSYMTOPCM (1.0 M) or SYSKA Cat part NO SSK-3279-/3280-12w or equavalent Bajaj, Philips, Wipro.

Supply and fix factory made street light control pane,with and including all accessories such as control switch,contactor,automatic control relay,pre-wired etc.fixed on fabrictated angle iron channel of suitable size and grouting on floor,Timlite-32 Amps,3 Pole 230/415 volts-Astronomical Time switch,Make- Indo asian -TL032ASO or its equiavalent in Havells,Legrand.

Supply and installation, commissing of wall mounting air cooled split type unit air conditioner electric driven single phase indoor unit and outdoor unit with cordless remote, control unit and with in built airioniser and plasma fiter for better indoor air quality cutting, brasing and connecting the copper pipe of size 1/2 inch and 1/4 inch size of pipe and making holes as for passing of copper pipes and electric cables and pressure testing with nitrogen and freon gas vacumising the system and charging the Non CFC refrigerent and testing the complete system for smooth functioning of split AC up to satisfaction more than 3 star rating, confirming to IS-1391 Para II 1992 herimatically sealed air compressor working with Non CFC refrigerent suitable for wall mounting 4500 K cal/ hrs 1.5 Ton complete all as specified and directed.

Supply & Fixing ceilling fan single phase, 230 volts, 50 Hz, 1200 mm sweep white colour with blades, down rod, canopy, clamp with safety pin, nuts, bolts complete set and connecting up with three core flexible PVC copper conductor cable of size 1.50 sqmm from ceiling rose or connector to fan, BEE 5 star rated, ISI marked complete all as specified and directed. Make Bajaj Kessals 50 ISI, or its equivalant in Crompton, Havells, Usha, Bajaj, Orient. Note : a) Quoted Rate is deemed to inclusive of Stickering/Marking/writing of MES numbers in bottom of ceiling Fan as directed by Engr-in-Charge.

S&F for wall mounted fan of size 400mm sweep 3 blade, 3 No. speed, 240 volt AC 50 HZ single phase 1320RPM motor speed double string and connecting with three core flexible PVC copper conductor cable of size 1.50 sqmm from ceiling rose or connecter to fan complete all as specified and directed. Make: Bajaj, Usha, Orient, Crompton, Havells.

Supply and install water heater storage type (Geyser) vertical type with copper inner container of capacity 25 litres, electrically operated, AC 230 Volts including 04 Nos of hold fastener nuts of required suitable size fixed in brick wall including PVC connection pipe (copper) chromium plated 8mm dia both ends threaded with brass coupling bolts both side, cone washer, not less than 45cm long suitable for hot/ cold water system complete all as specified and as directed. Make: Havells Cat part No. GHWASESWH025 or equivalent of Recold/ Bajaj

Supply and fixing of exhaust fan metal body of 300mm sweep, 900 RPM, AC single phase, heavy duty including metallic louvers and shutter and connecting with three core flexible PVC copper conductor cable of size 1.50 sqmm from ceiling rose to fan taking down old exhaust fancomplete all as specified and directed.

Supply and laying for 20mm bore GI tubing light grade laid in trenches as in protection of UG cable at road crossing/ hard standing/ on pole (with necessary MS clamps, nuts, bolts and painting two coats synthetic enamel paint over a coat of red oxide primer) as per site requirement complete all as specified and as directed.

Supply and laying for 25mm bore GI tubing light grade laid in trenches as in protection of UG cable at road crossing/ hard standing/ on pole (with necessary MS clamps, nuts, bolts and painting two coats synthetic enamel paint over a coat of red oxide primer) as per site requirement complete all as specified and as directed.

Supply and laying for 50mm bore GI tubing light grade laid in trenches as in protection of UG cable at road crossing/ hard standing/ on pole (with necessary MS clamps, nuts, bolts and painting two coats synthetic enamel paint over a coat of red oxide primer) as per site requirement complete all as specified and as directed.

Supply and fix for junction box for street lights, CPRI approved, of size 250 x 300 x 150 mm made out of CRCA sheet 2 mm thick totally enclosed, dust and vermin proof, rain protected slanted roof top, door pasted with rubber gasket, water tight IP 42 protection single leaf shutter in front having proper locking arrangements and painted with powder coating paint and suitable size of "connectwell" stud teriminal (provision for socket bolting)- 05 Nos suitable for 415 volts, 50 Hz, 3 phase 4 wire internal wiring system including MCB SP 06 amps- 01 No and mounted on security light pole with suitable bracket nuts, bolts including taking down of exiting unserviceable box complete all as specified and as directed.

Supply and fix for junction box for street lights, CPRI approved, of size 190 x 140 x 110 mm made out of CRCA sheet 2 mm thick totally enclosed, dust and vermin proof, rain protected slanted roof top, door pasted with rubber gasket, water tight IP 42 protection single leaf shutter in front having proper locking arrangements and painted with powder coating paint and suitable size of "connectwell" stud teriminal (provision for socket bolting)- 05 Nos suitable for 415 volts, 50 Hz, 3 phase 4 wire internal wiring system including MCB SP 06 amps- 01 No and mounted on security light pole with suitable bracket nuts, bolts including taking down of exiting unserviceable box complete all as specified and as directed.

Supply and fix for junction box of size 150 x 150 x 150 mm made out of CRCA sheet 3 mm thick totally enclosed, dust and vermin proof, rain protected having proper locking arrangements and painted with powder coating paint and suitable size of stud teriminal complete all as specified and as directed.

Supply and fix black bolt with hexagon head and nut round neck of any size as required at site complete all as specified and as directed.

Supply only PVC insulated and PVC sheathed multistranded copper conductor cable of size 4 core 6 Sqmm with necessary electrical connections from fitting to connector block including taking down unserviceable one complete all as specified and as directed. Make: Finolex/ Havells as approved.

Material and labour for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less then 2.25 meter deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel and connected to main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 54 cm x 54 cm x 5 cm including 8mm dia TMT bars both ways with one handle for lifting made out of 8mm dia MS bar, funnel, wire mesh, 20 mm bore galvanized steel tubing (medium grade) for watering, filling charcoal or coke and salt in alternate layers, 15mm bore galvanized steel tubing light grade for protection of earth lead connection, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown on electrical plate No.3 of SSR Part-I. (Note: GI earth wire and protection pipe upto 7.5metres shall be deemed to be included in quoted rate)

Material and labour for sub main wiring with approved colour coding as per IS with two runs of single core PVC insulated FRLSH cable with multistranded copper conductor of size 4.0 Sq. mm nominal area and drawing through and including non metallic rigid heavy duty PVC conduit and conduit accessories concealed in wall including one run of single core PVC insulated 2.5 Sqmm (nominal area) multistranded FRLSH copper conductor as earth wire connected from DB to DB/ main board complete all as specified and as directed. (Note- Two runs of 4.0 Sqmm, one run of 2.5 Sqmm conductor and one run of PVC conduit will be measured as one unit)

Supply and erecting steel tubular swaged pole type 410-SP-31 (9.5metre long) including cast iron base plate, finial taper plug, cap, mild steel bolts, nuts, screws including applying two coats of black bituminous paint internally and externally from bottom end of pole upto PCC coping and applying two coats of aluminium paint over a coat of aluminium Primer (externally from top of coping) and bottom of pole to be painting with alternate yellow and black synthetic enamel paint (4 Nos. each strips 150mm wide) including writing MES pole No. with synthetic enamel paint (first grade/ quality) complete all as specified and as directed. Note:- Earthwork, Cement Concrete, etc. will be measured and paid separately under relevant items.

Note : 1. Performance security:- Refer Condition 22 of Special Conditions 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

Gauri Associates

Parhar Enterprise