GE (N) P/TOKEN- 78 OF 2025-2026 SPL REPAIRS TO 19/B AT SHIVAJI MARG OFFICER MD ACCN IN THE AREA OF AGE B/R (EAST) UNDER GE (N) PUNE

Dismantling asbestos cement (plain, corrugated, semi corrugated etc.) sheets in roof coverings complete all as directed.

Dismantling timber in scantling, fillets, rails, posts, rafters, purlins etc over 40 Sqcm in section in unframed work in any position complete all as directed.

Dismantling timber scantling in fillets, rails, rafter, purlins etc, under 40 Sqcm in section, unframed work complete all as directed.

Demolition of Brickwork or stone / block masonry, built in cement mortar dressed stonework and precast concrete articles complete all as specified and directed

Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth and getting out in hard/dense soil complete all as specified and as directed.

Returning ,filling in ,including spreading ,levelling,watering and well ramming in layers not exceeding 25cm in hard dense soil complete all as specified and as directed.

Removing surplus excavated soil to a distance exceeding 5 km but not exceeding 15 km and depositing where directed

Material and labour for PCC (1:2:4) type B-1 (using 20 mm graded broken stone aggregate) as in coping on top of wall, bed blocks, lintel band upto 1.5 m. span and the like including weathering, slightly rounded or chamfered angles and throating including use of necessary form work all as specified and as directed.

M&L Fly ash brick work using old size bricks, straight or curved on plan exc 6m mean radius built in cm 1:6 including demolition of existing brick work complete all as specified and as directed.

M&L for 15mm thick cement plaster in CM 1:4 on bricks or concrete surfaces finishing the surfaces even and smooth without using extra cement , with two coats of exterior acrylic emulsion paint over a coat of primer on new surface complete all as specified and as directed.

Supply and fix for rolled mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming Fe 410-W(Gde-E-250) quality -B complete all as specified and as directed.

Supply and fix for mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 as in batterns for roofs complete all as specified and as directed.

S&F mild steel framed work such as grills, gratings, etc with end of bars shouldered and / or riveted or forged into spike framed guard bars, barred iron doors and similar work conforming to Fe 410-0 or Fe 310-O.

M&L petty repair to aluminum/glass doors, windows, partitions and making good the same (i.e. Handles, hinges, rubber beadings, clips etc) complete all as specified and directed.

S &F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer- in-charge.

M & L for precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in cover slab for manhole, septic tank, etc, set in CM 1:6 including necessary form work, moulds, etc, complete all as specified and directed.

M&L for providing and injecting Along the external wall below concrete or masomy apron using chemical emulsion @ 2.25 litres per linear meter including drilling and plugging holes etc. in apron etcc omplete all as specified and as directed

M&L for Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12 mmdia )holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and as directed

M&L for providing and injecting At points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and as directed

Supply and fix for rolled Mild steel Plates (plain or chequered) channels, square cut or notched (ordinary & counter sunk) forming holes, without any attachment etc. conforming Fe 410-W(Gde-E-250) quality-A complete all as specified and as directed. .

Mild steel screw bolts (machine made) 5 to 10mm dia of neck with hexagonal or square heads at one end and screwed the othere, each screwed end to be fitted with washers and one hexagonal or square nut exc 5cm but n exc 10cm long complete all as specified and directed.

Supply and fix for 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws with two corrugation side lap complete all as specified and as directed.

Supply and fix for 0.50mm thick pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour, having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L preparation of old painted wooden surfaces plain or moulded surface of any description over 10 cm girth or width, not otherwise described and apply one coat of synthetic enamel paint complete all as specified and as directed.

Dismantling of wall/ceiling board of any description and any thickness including cover fillets etc complete all as directed.

Supply and fix anodised aluminium snap grid of size 605mm x 605mm frame work for false ceiling using 25x23x1.5mm tee both ways & wall angel of 35x25x1.5mm (wall angle to be fitted to walls by scewing on wooden plugs (inserted in wall at every 60 Cm c/c) and neatly sealed the cutting opening ) and including hangars 6 mm dia G.I (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long(all costs are included) all as specified and as directed.

Supply and fixing of Non asbestos fibre cement building boards 4mm thick (lake and hill design) laid/inserted to timber/ Steel /aluminum frmework in repairs all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed

Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed

M&L for 25mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregates) as in sub base complete all as specified and as directed

M&L for vitrified colour ceramic light shade tiles 10 mm thick, area of each tiles exceeding 0.18 sqm but n.exc 0.36 sqm in floors set & jointed in neat cement slurry & joint filling of tiles by using epoxy to match the surface to match including 20 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for vitrified colour ceramic light shade tiles 10 mm thick, area of each tiles exceeding 0.18 sqm but n.exc 0.36 sqm in Skirting /dado set & jointed in neat cement slurry & joint filling of tiles by using epoxy to match the surface to match including 10 mm thick back coat in CM 1:3 complete all as specified and directed.

M&L non-skid coloured ceramic tiles 7 to 8mm thick joint free (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm as in floor etc set and joint filling of tiles by using epoxy to match the surface to match the tiles including 20mm thick screed bed or bedding layer in CM 1:6 complete all as specified.

M&L non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floor etc set and joint filling of tiles by using epoxy to match the surface match the tiles including 15mm thick screed bed or bedding layer in CM 1:4 and demolition of existing tiles complete all as specified and as directed

M&L glazed ceramic coloured tiles of size 600 x 300 x 7mm / 450 x 300 x 7mm / 450 x 350 x 7mm thick, on vertical surfaces of walls such as skirting dado etc. set and joint filling of tiles by using epoxy to match the surface, finishing of corners with PVC beading including 10mm thick rendering in cement mortar 1:3 complete, all as specified.

M&L for 15mm thick cement plaster in CM 1:4 on bricks on concrete surfaces finishing the surfaces even and smooth without using extra cement including taking down existing plaster with two coats of exterior acrylic emulsion paint over a coat of primer on new surface complete all as specified and as directed

M&L for rendering or plastering work 10mm thick in CM 1:3 in fascia or edging of Chajjas, ceiling and roof projections etc, including taking out pealed off plaster / concrete and making the line in true shape and finishing the surface without using extra cement including applying two coats of exterior acrylic emulsion paint over a coat of primer for facia, chajja, and roof projection etc all as directed by Engr-in-Charge..

M&L for Rendering 10 mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:6) finished even and fair without using extra cement, including taking down existing plaster with two coats of OBD of any tint over a coat of primer all as specified and directed.

M&L for Cement concrete 1:3:6 type C-2 (using 40mm graded agg) as in plinth protection, 75 mm thick and finished even and smooth without using extra cement, including demolition of existing cement concrete all as specified and directed

M&L Granite (of any type), 16- 18mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platform,WHB plateform and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixer of pigment to match with marble shade including making full curving the edges complete. all as specified.

M&L for machine cut 20mm to 25mm thick polished cudappah stone slab as in shelves, partitions, cooking platform below granite stone and like including necessary jointing and pointing and making good to disturbed surface complete all as specified and directed

M&L Rotational moulded polythene water storage tank of 1000 Ltrs capacity (three layer white colour) cylinderical vertical with closed top including 3 Nos GI check nuts and tank nipple of 25mm bore for inlet and outlet, 25mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball hoisted and fixed in position all as specified in SSR part -I including taking down of old unserviceable tank complete all as specified and directed.

S&F of 3- layer PP-R Polypropylene random copolymer) concealed Outer diameter of pipes in 32 mm dia SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water apply all PP-R plain & brass threaded polypropylene random fittings laid in floors,wall and ceilling in repairs etc complete all as specified and directed.

S&F of 3- layer PP-R Polypropylene random copolymer) concealed Outer diameter of pipes in 15 mm dia SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water apply all PP-R plain & brass threaded polypropylene random fittings laid in floors,wall and ceilling etc in repairs complete all as specified and directed.

S&F of 3- layer PP-R Polypropylene random copolymer) concealed Outer diameter of pipes in 20 mm dia SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water apply all PP-R plain & brass threaded polypropylene random fittings laid in floors,wall and ceilling etc in repairs complete all as specified and directed.

S&F of 3- layer PP-R Polypropylene random copolymer) concealed Outer diameter of pipes in 25 mm dia SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water apply all PP-R plain & brass threaded polypropylene random fittings laid in floors,wall and ceilling etc in repairs complete all as specified and directed. Note:- (a) The unit rate shall be include for taking down existing pipe and connections and all fittings as directed. (b) The unit rate shall include the cost of short lengths, with all pipe fittings such as bends, tees, short pieces connectors, elbows, reducers, unions, sockets etc and fixing accssories such as pipe hooks, screws clamps etc

M&L UPVC pipe of pressure 10 kgf/cm 2 suitable for water supply distribution incl all fittings,20 mm dia complete all as specified and directed.

M&L UPVC pipe of pressure 10 kgf/cm 2 suitable for water supply distribution incl all fittings, 15 mm dia complete all as specified and directed.

S&F 25 mm dia SS drapery rod , including brackets, decorative knobs at both ends & PVC curtain rings 8 Nos (minimum) complete all as speccified and directed.

M&L cutting chases pinning in brick work for concealing water tubing and making good to facing where required and pointing in cement motar 1:3, cutting n.exc. 10cm girth complete all as specified and directed.

S&F in repairs Vitreous China wash down water closet pan (pedestel pattern) ETWC white, including trap connection to drain (outgoing pipe) and to flushing pipe, antisyphonage pipe, PVC jet for Pedestal pattern pan including 450/600mm long PVC connection and plastic water closet seat of white in colour, back closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and directed. Make : Cera/Prayag/Johnson Pedder.

S&F in repair 10 ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float ovel handle including brackets and PVC flushing pipe of polyethylene of low or high density or PVC 32mm dia complete all as specified. Make : Cera/Prayag/Johnson Pedder.

S&F in repair vitreous China squatting pan Orissa pattern size 580 x 440mm white with integral foot rest ( excluding flushing cistern and flush pipe), including long Arm P-trap (CI) 100 mm dia of lenght up to 700 mm or as per site requirement ,complete including making good to floor complete all as specified and directed. Make : Cera/Prayag/Johnson Pedder.

S&F in repair vitreous china wash hand basin white of bowl size 550 x 440mm including waste coupling and PVC waste pipe, 32mm dia, pillar tap cast copper alloy with capstan heads chromium plated fancy 15 mm bore to be fixed with and including M S brackets complete all as specified and directed. Make : Cera/Prayag/Johnson Pedder.

S&F in repair 15mm dia brass chromium plated fancy type, sink cock with regulator with extension body with fly nuts capstan head screwed down high pressure with or Without lettered hot or cold with long scewed shank complete all as specified and directed. Make: Jaquar Cat No.ARI 39347 S

Supply and fix in repair for corner glass shelf of size 300mm dia and 8mm thick with chromium plated railing, fixed with and including chromium plated bracket complete all as specified and as directed.

Supply and fix in repair for corner glass shelf of size 200 mm dia and 8mm thick with chromium plated railing, fixed with and including chromium plated bracket complete all as specified and as directed.

S&F in repair PVC connection 15mm bore size with PTMT nuts and washers of length 450mm all as specified. Make : Prayag/Polytuff.

S&F in repair Cabinet mirror plastic body for toilet of size 350mmx450mm with 4mm thick looking mirror complete all as specified and directed. Make : Prayag/Polytuff.

S&F in repair Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including 32mm dia waste pipe and CP grating and bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F stainless steel, sink 1 mm thick for kitchen or laboratory, with plugs, waste pipe, washers; incl bedding in cement mortar on to dwarf wall or including fixing cantilever CI Brackets, connecting union etc & connecting to inlet/out let for smooth functioning size of sink 495 x 420mm overall and bowl size 410mmx330mmx160mm, including PVC connection, CP waste coupling, etc. complete all as directed by Engr-in-Charge

S&F Stainless steel grade 304 utensil racks for modular kitchen incl latches, magnetic hinges, handles and all necessary fittings required for modular kitchen, all as specified and directed by Engr-in-Charge, consisting following components:- (a) Cup plate rack made of 3mm dia stainless steel wire (b) Meal plate rack made of 3mm dia stainless steel wire (c ) Catlery Basket made of 3mm dia stainless steel wire (d) Bottle basket plate rack made of 3mm dia stainless steel wire (e) Stainless steel hinges 19mm long L type (f) Stainless steel hinges 12mm L type (g) Stainless steel hinges 6mm long L type Note: 1) Weight of each unit shall be assessed at site.

Supply and fix in repairs for hand shower chromium plated (health faucet) 15 mm bore, (ABS body) with 8mm dia. 1 metre long flexible tube & wall hook, Cat No. ALD-CHR-593N of make Jaquar or of equivalent make as per Appx 'A' as approved by GE complete all as specified and as directed.

S & F in repair brass Chromium plated soap dish , fixed to wall with CP brass screws, all as specified and directed. Make: Johnson Fusion series Cat part No: T3252C or of equivalent make as per Appx 'A' as approved by GE

S&F in repairs Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F in repair Brass Chromium plated towel ring all as specified and directed. Make: Johnson Fusion series Cat part No: T1351C or of equivalent make as per Appx 'A' as approved by GE

S&F in repairs Bib Cock long nose quarter turn suitable for 15mm bore pipe long body with flange fancy type brass CP with, screwed for iron pipe or brass ferrule complete all as specified. Johnson VIVA new series Cat part No: T4806C or of equivalent make as per Appx 'A' as approved by GE

S&F in repairs wall mixer brass chromium plated quarter turn with provision for over head shower with 115 mm long bend pipe on upper side connecting legs and wall Flanges suitable for fixing with GI pipes 15mm dia complete all as specified and as directed. Make: Jaquar Cat Part No FUS- 29273UPR FUSION SERIES or of equivalent make as per Appx 'A' as approved by GE.

S&F in repair angle cock with flange quarter turn chromium plated cast copper alloy ISI marked, high pressure screwed down complete all as specified and directed Make: Johnson Eco Cat part No: T3910C or of equivalent make as per Appx 'A' as approved by GE.

S&F in repairs Two Way bib taps with wall flange quarter turn suitable for 15mm bore pipe long body fancy type brass CP, screwed down screwed for iron pipe or brass ferrule complete all as specified. Make Johnson VIVA new series Cat part No: T4808C or of equivalent make as per Appx 'A' as approved by GE.

S&F in repair cast copper alloy CP shower arm square 230mm long with flange complete all as specified and directed by Engr-in-charge. Make : Johnson Cat part No: S0001C1 or of equivalent make as per Appx 'A' as approved by GE.

S&F in repair brass chromium plated shower rose 115mm size square (without arm) with swivel joints including fixing arm/ pipe all as specified. Make Johnson Cat part No: S0006C or of equivalent make as per Appx 'A' as approved by GE.

S&F in repair Toilet paper holder of stainless steel, all as specified and directed. Make: Johnson Fusion series Cat part No: T3254C or equivalent as approved by the GE.

S&F in replacement 75mm bore PVC (SWR) floor trap plain with CP grating including jointing with solvent cement to waste pipe fixed in cement concrete type B-1, 1:2:4 using 20mm graded stone aggregate complete all as specified.

Taking up or down 20 mm bore steel /PPR/CPVC tubing or any other pipe and connections, and removing to store for taking in account of credit and fixing of CPVC pipes 25mm outer dia SDR 13.5 & Plain CPVC SDR 11 fittings onwalls/ceiling or laying in floors complete all as specified

Taking up or down 15mm bore steel /PPR/CPVC tubing or any other pipe and connections, and removing to store for taking in account of credit and fixing of CPVC pipes 20mm outer dia SDR 13.5 & Plain CPVC SDR 11 fittings onwalls/ceiling or laying in floors complete all as specified

S&F in repairs 110mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete all as specified and as directed

S&F in repairs 75mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete all as specified and as directed

S&F in repairs 110mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls complete all as specified and as directed

S&F in repairs 75mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls complete all as specified and as directed

S&F in repairs PVC (SWR) bends of any radius of 110mm bore complete all as specified and as directed

S&F in repairs PVC (SWR) bends of any radius of 75mm bore complete all as specified and as directed

S&F in repair for PVC (SWR) junction single (single ‘T’) equal or unequal with access door for 110mm bore pipe complete all as specified and as directed

S&F in repair for PVC (SWR) junction single (single ‘T’) equal or unequal with access door for 75mm bore pipe complete all as specified and as directed

S&F PVC (SWR) vent cowl of size 110mm bore complete all as specified and directed

S&F aluminium anodised powder coated ventilator using rectangular tube of size 63.50 x 25 x 1.50 mm including 3.50 mm thick designer glass louvers and stainless steel wire mesh 0.36 mm nominal dia of wire, average width of aperture 1.40 mm using ‘Jindal” aluminium section with provision for exhaust fan complete all as specified and directed by Engineer-in-Charge.

Supply and fix for aluminium powder coated three track sliding window with two glazed shutters with 4mm thick float glass ordinary quantity and one shutter of stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing handle, locks, PVC rubber lining etc complete all as specified and as directed. Catlouge numbers of Jindal company or equivalent make complete all as specified and directed. Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604.

Demolition of RCC slab roofs, floors (other than ground floors), beams, staircases, landing,chajjas and similar suspended work complete all as specified and directed

M&L for RCC (Nominal mix) Type B1 1:2:4(20mm graded crushed stone aggregate) slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and directed

Use & waste for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work;not exc 200mm thick(Horizontal or sloping) complete all as specified and directed

Taking down chowkats or frames not exc. 1.5 sq. m each with shutters of any description (without taking off shutters from the frames) complete all as specified and directed

Taking down chowkats or frames exc. 1.5 sq.m but n exc 4 sqm each with shutters of any description (without taking off shutters from the frames) complete all as specified and directed

Taking down chowkats or frames exc. 1.5 sq. m but n exc 4 sqm each complete anf refxing again in same opening after complete all as specified and directed

Factory made single extruded WPC (Wood S&F Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat double rebate 125 mm x 65 mm sizecomprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp- ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Factory made single extruded WPC (Wood S&F Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat Frame size 45 x 85 mm size comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp- ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made..NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.

S/F 35 mm thick factory made 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive s/s wire cloth, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a) complete all as specified and directed

S & F Stainless steel wire cloth ISI marked, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with alluminium wire staples complete all as specified and directed

S&F 300mm, Mild steel spring for door, ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed

Supply and fix for 35mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including second class hard wood plain cover fillets 35X6mm all around the shutters including two coat of synthetic enamal paint over one coat of pink primer complete all as specified and directed.

S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flushdoor shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

S&F 100mm long butt hinges, medium weight, cold rolled mild steel with brass/bronze hinge pin complete all as specified and as directed

S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed

S&F 200mm long Aluminium anodised, barrel tower bolts of extruded section and fixedcomplete all as specified and as directed

S&F 150mm extruded aluminium alloy handles, fabricated type anodised as specified and directed

S & F Hasp and staple, in 100 size mm safety type,aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws

S & F 18 mm thick UV coated exterior grade MDF board duly edge banded with 0.8 mm thick PVC taping, fitting of shutters shall be fixed as approved by GE suitable for cup board etc. including taking down with existing one complete all as specified and directed. Make: Action tesa, Century, Kitply

Removing building material exc 1.50 Km and not exc 5.00 Km out side the MD land including loading and unloading etc., where responsibility regarding place of deposition and obtaining permission from all authorities etc., in this regard will be of contractor and all as specified.

M&L in repair for 150mm bore RCC pipes, class NP2 laid and jointed with collars and tested including demolition of existing old one (salt glazed earthware, AC or reinforced pipes etc) set in cement mortar complete all as directed.

S&F in replacement 75/100mm bore PVC (SWR) floor trap plain with CP grating including jointing with solvent cement to waste pipe fixed in cement concrete type B-1, 1:2:4 using 20mm graded stone aggregate complete all as specified and as directed

S&F in repair chromium plated gratings 100mm dia with drain hole all as specified and directed Make: ISI Marked or of equivalent make as per Appx'A' as approved by GE

S&F in repair 110mm bore PVC cowl complete all as specified and as directed

S&F in repair 75mm bore PVC cowl complete all as specified and as directed

Dismantling of boarding , any description , fixed in any position with nails including battens etc complete all as specified and as directed

M& L 2nd claas hard wood plain fillets square/ rectangular or triangular in section, wrought secured with nails or brads sectional area exc 13 & not exc 25 sqcm complete all as specified and as directed

M&L for 18mm thick ,solid, decorative type, WPC (Wood Polymer Composite) board, for kitchen cabinet and drawer,comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water / moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on edges and fixing with necessary full body threaded star headed counter sunk S.S screws, etc all as per direction of Engineer- In- Charge. (Note: hinges shall be paid separately)

S & F Cupboard/Shelves made of HDHMR (high density high moisture resistance) board manufactured with hard wood, prelaminated both sides white in colour 18 mm thick water resistant, termite resistant, duly edge banded with PVC taping 0.8 mm thick, cut to shape & size of shelves including taking down with existing one complete all as specified and directed. Make: Action tesa, Century, Kitply

S & F soft close telescopic drawer channel, 550mm length, sidemount type, suitable for weight upto 35 Kg all as directed by Engr-in-charge.

S & F Stainless steel drawer handle ,100 mm size, decorative type fixed with SS screws all as specified and directed by Engr-in-charge.

S & F SS Auto soft closing concealed cabinet hinges, bright finish or electrogalvanised complete all as specified and as directed

S & F Stainless steel drawer /cabinet chest pull/kadi handle ,75 mm size, fixed with SS screws all as specified and directed by Engr-in-charge.

Preparation of old treated of wall surfaces and applying one coat of cement base paint all as specified and as directed directed by Engr-in-charge.

S & F Continuous (piano) hinges, stainless steel, Width of flaps (when open) in 20mm, 0.8mm thickness complete all as specified & directed.

Complete removal of existing treatment on old surfaces of wall and applying two coats of distemper oil- emulsion over a coat of primer over 2mm thick wall care putty on wall on wall complete all as specified and as directed

S&F stainless steel wall mounted plate rack of size 900x600x260mm of approved make including taking down old wooden plate rack complete all as specified and directed. Make : Blue star Model No BSKPR-311 or equivalent in approved Manufacturers.

M&L PCC (1:4:8) type D-2 ( 40 mm graded stone aggregate) as mass concrete as in foundation, mass concrete work.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine crusher/M sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand.

M&L for chequered cement concrete tiles 25cmx25cmx25mm thick , with grey cement and pigment set jointed and pointed in neat cement slurry in floors including 20 mm thick screed bed or beding layer in cement mortar 1:6 complete all as specified and as directed

Material and labour for point wiring using approved colour coding as per IS ,with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade ISI-694 marked drawn through in and including heavy duty PVC concealed conduit including all accessories, Metal flush box of suitable module, with earth dolly, covered with twin colour (specified by Engr-in- Charge)modular white cover plate & frame after chasing in stone masonry walls etc for accomodating modular switches, sockets, regulators etc including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dolly, providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed for the following

One light / wall / exhaust fan point controlled by one, one way switch 6 Amps complete all as specified and as directed

One ceiling fan point controlled by one, one way switch 6 Amps and regulator Note : PVC Casing caping / Pipe of size as required at site on surface of ceiling (only for fan point) in lieu of concealed is permitted and is deemed to be included in the unit rate quoated.

One bell point controlled by one, one way switch 6 Amps complete all as specified and as directed

One 5 pin socket outlet plug point, 6 Amps, controlled by one, switch on same board complete all as specified and as directed

One 5 pin socket outlet plug point, 6 Amps, controlled by one, switch on independent board complete all as specified and as directed

Description all as per 131 here-in before but using 2.5 Sqmm single core copper conductor FRLS cable of multistranded PVC insulated unsheathed 1100 Volts grade for one 6 pin socket outlet plug point,16 Amps independent including necessary running of 2.5 Sqmm PVC insulated multistranded copper conductor single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dolly providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed

Supply and fixing Modular Switch - 6 Amps, Single pole one way, one module complete all as specified and as directed.

Supply and fixing Modular Bell push - 6 Amps, Single pole one way, one module complete all as specified and as directed.

Supply and fixing Modular Switch - 16 Amps, Single pole one way, one module complete all as specified and as directed.

S & F Modular socket outlet multipurpose 6 Amps, 5 pin, 2 module, complete all as specified and as directed.

S & F Modular socket outlet multipurpose 16 Amps, 6 pin-shuttered type, 2 module, complete all as specified and as directed.

Supply and fixing, Ding Dong bell suitable for operation on AC. 230 volts, single pole complete all as specified and as directed.

Supply and fixing modular fan step regulator, 120W - 2 module suitable for ( 48" & 56" fans) supply complete all as specified and as directed.

S & F Ceiling rose, 3 phase / PVC / polycarbonate, complete all as specified and as directed

Supply and fixing 22 Watt Inverter LED Battenaluminium body with Opal Diffuser, IP20, Battery back-up & Functioning as per Product TDS with intregrated electronic driver, connector block, holder, decorative end caps, LED tube light etc complete with all accessories prewired and mounting PVC rectangular block, including provision of flexible copper conductor cable of suitable size from ceiling rose to connector and taking down old unserviceable fitting from existing postion for carrying to store, making good disturbed surfaces complete all as specified and as directed. Make Halonix Cat No LED INVERTER BATTEN HLB-08-22-CW-INV or equivalent in Havells, LHEXACP7FNIW020

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to connector, making good disturbed surfaces complete all as specified and as directed. Make Jaquar cat No -LGLZ01X010XW , Orient Cat No- LBLN-10-C-SQ

S & F for recess mounted 2' x 2' square LED panel 36 watts, 596 x 596 x 9mm size, sleek design aluminium housing, polycarbibate diffuser white powder coated finish operating voltage 140 volts - 270 volts, AC, 50 Hz complete all as specified and as directed. Make- Halonix HLFPR22-11-36-CW-37mm, Philips RC383B LED 4000 PSU ODWH PIR, Jaquar LULTU1S036XC.

S & F in Repair for Decorative wall mounted luminaire with opal glass with nickle finishing wall lamp with E27 lamp holder with and including LED bulb 10/11 watts complete all as specified and as directed. Make- Jaquar Cat part No - JNL-CHR-WLSL-55004E27 , HALONIX HLWB-05-E27 or its equivalent in Philips.

S/F LED street light fitting 35 Watt 230V energy efficient & environment friendly type. The fitting should have powder coated, pressure die cast Aluminium housing and heat resistant toughened glass with frame having better optics for uniform distribution complete all as per Make JAQUAR Cat No LSRTO4S025XC or equivalent of make Bajaj, Philips, Havells as approved.

Supply and fixing BLDC ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 225 meter cube per min, powder coated, with remote, 350 RPM, 30 Watts with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) →, ISI marked complete all as specified and directed. Note : a) Quoted Rate is deemed to inclusive of Stickering/Marking/writing of MES numbers in bottom of ceiling Fan as directed by Engr-in-Charge. Make:- USHA, Orient Electric I-Tome, Atomberg Effico Plus/Havells

S & F for plastic body exhaust fan, AC single phase, 240 V of size 250 mm sweep with louvers (as per Cat Part No -698502 of Make Indo Asian or equivalent Make- Bajaj Maxima DX/ Usha Crispair )including necessary connection and replacement of flexible copper cable from ceiling rose and taking down of old unserviceable fan complete all as specified and as directed

Taking down carefully existing unserviceable main switch /cutout /DBs of any type, capacity and description and removing materials from site and making good disturbed surfaces of walls, floors as per the existing finishes all as specified and as directed.

S & F sheet metal enclosure MCB DB SPN 12 way with 100 Amps rated bus bar 240 Volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of disturbed surface to match the existing colour of wall complete all as specified and as directed

S & F Vertical TPN Distribution Board in sheet metal enclosure double door 4 Way, 415 volts, 50 Hz, suitable for Flush Mounting and surface Mounting & provision for FP MCCB as incomer up to 125 Amps as I/C ( Frame1) and SP/TP MCB's as outgoing (Modules Optium F1+12) , With -100 Amps Copper insulated Busbar assembly for each phase, isolated Neutral bar, 2 Earthbar and Cable ties for cable management, IP 43 - #IK 09 with metal door including necessary cement work and electrical connections complete all as specified and as directed.

Supplied and fixed Four pole MCCB, Thermal Release Range 100 Amps, rupturing Breaking Capacity Icu at 415V AC 50Hz. 16 (kA) complete all as specified and as directed

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP 5 To 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed

Taking down of old unserviceable sub main wiring of any type complete all as specified and as directed.

S & F decorative LED bollard warm white 15 Watt with aluminum die casting, with adequate size elecrical connections complete all as specified and as directed. Make: Halonix

Supply and fixing post top lantern LED type 40 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed

S & F submain wiring with 2 single core (FRLS) PVC insulated unsheathed multistranded flexible copper conductor cable, of 4.0 Sqmm and one single core 4.0 Sqmm flame retardent low smoke (FRLS) PVC insulated, unsheathed, multistranded, flexible copper cable as earthing lead , all as per IS 694/1990 drawn through including concealed in stone masonary PVC conduit and conduit accessories heavy duty ISI marked, providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed all as specified and as directed complete all as specified and as directed. Note :- ( Two runs of main copper wire, one run of earth wire cable & PVC conduit shall be measured together as one length).

All as per item No 158 but of size 2.5 Sqmm

All as per item No 158 but of size 1.5 Sqmm

Supply and fix for sheet metal enclosures single pole and neutral enclosure with a two pin and earth plug and socket complete with one MCB SP 20/ 32Amps including removal of old unserviceable one complete all as specified and as directed.Make - Scheinder/Legrand/L&T/ ABB

Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on complete all as specified and as directed

Taking Down existing and Supply and fix electric water heater, storage type Inner container material Steel with Glass and having 2 Nos Heating element type of Incoloy with Glass coated heating element upto 2 KW capacity 25 litre, 230 Volts 50 Hz , temp range 35 to 75 C, with 7 Years on Tank,4 Years on Heating Element and 2 Years on Other Parts, with Outer body material of ABS, PUF insulation, lined BEE 5 Star, with product dimension of 470x470x371mm rated vertical type complete with all accessories such as safety valve, thermostate, NRV, connection piece etc all as specified and directed by Engr-in-Charge. (Make ERICA DIGITAL : VOLUME 25 LTR of Jaquar or equivalent in Havells/Bajaj/Recold/Haier/Orient/Hindware)

Supply and fixing of geyser Bolt 120mm Long with nut & washers, complete all as specified and directed

Supply and installation of high-quality, durable material suitable for hot water applications 2 feet PVC connection for geyser, including all necessary fittings such as appropriate joints, couplings, or elbows as required for the installation, connections, and accessories including complete installation, testing, and making good of the site directed by Engineer-in- Charge complete all as specified and as directed

Supply and fix Sheet metal Enclosure with socket plug top and MCBs Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps, 240 Volts 50 Hz all as specified Engineer-in- Charge complete all as specified and as directed

Supply, lay, joint, test and commissioning of LT under ground cable 1100 volt grade , XLPE insulated and PVC sheathed heavy duty armoured with aluminium conductor , IS 7098-I Marked, Laid in trenches/ducts/fixed on poles/walls/laid under roads/paths/drains/culverts or encased in GI pipe including cable glands, lugs jointing material etc complete all as specified and directed. cable of the size 16 sqmm, 4 core Note: Rate of under ground cable includes earth Work, sand cushioning, brick or PCC covering, light Grade GI tubing where necessary,testing etc complete all as specified and as directed

Excavation in trenches not exc 1.50 Metre wide and not exc 1.50 Metre depth for laying of UG Cable/Pole/Stays etc getting out in Soft/Loose Soil, complete all as specified and as directed.

Removing Surplus soil to a distance not exc 50.00 Metre away and depositing where directed at a level not exc 1.50 Metre above the Starting Point, complete all as specified and as directed.

Supply and lay pipe galvanized, “Medium class”, including fittings, 25 mm (1”) dia. . Make : TATA/JINDAL or equivalent

All as per item No 170 above but of size 40 mm dia

Supply and fixing gun metal gate valve with iron head wheel head screwed both ends for iron pipe and fixed on 25 mm dia all as specified and directed.

M&L for cutting the existing GI tubing of size 40/32 mm dia for taking new connection of 25mm dia GI pipe complete withall fittings all as specified and directed.

Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.