REPAIR TO FOOTPATH, DRAINS AND HARD STANDING OF AREA-I OF AGE B/R (W) AT COLABA, MUMBAI

Amount

Demolition of stone slabs and tiles of any description or thickness in floors aprons etc laid, bedded and pointed in any mortar and removal of rubbish off the site out side MD land all as specified and directed.

Demolition of cement concrete in ground floor and paving not exc. 15cm thick (below or above ground level) and removal of rubbish off the site out side MD land all as specified and directed.

M&L 75mm thick PCC 1:3:6, type C2 (using 40mm graded crushed stone aggregate) as in plinth protection and all other similar works, finishing the cement concrete surfaces even and smooth without using extra cement all as specified and directed.

M&L for MIXED CEMENT CONCRETE DELIVERED ON BUNKER M20 type 1, 1:11/2:3 (using 20 mm graded crushed stone aggregate) as in flooring and all other similar works all as specified and directed.

M&L PCC 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) in foundations, filling and mass concrete all as specified and directed.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition of any description and in any position not otherwise specifically provided for including removing debris off site out side MoD land all as specified and directed.

M&L for providing precast cement concrete type B1 1:2:4 (using 20 mm graded crushed stone aggregate) set in cement mortar 1:4 in road side kerb stones of any shape & size and all other similar works all as specified and directed.

M&L PCC 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregate) as in coping, bed concrete and all other similar works including necessary formwork all as specified and as directed.

M&L RCC 1:2:4, type b1 (using 20mm graded crushed stone aggregate) as in Slabs supported on walls, and all other similar works all as specified and directed.

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming all as specified and directed.

M&L rubber moulded glossy finished 60 mm thickness precast concrete interlocking paver block of any shape and size confirming to IS 15658 -2006 of, M-35 Grade with grey cement and pigment laid over sand cushning 25 mm thick compacted thickness bed of coarse sand, filling the joints with fine sand all as specified and directed.

M&L plain cement concrete tiles 25cm x 25cmx 20-22mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished all as specified and directed.

M&L Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in Cement mortar 1:6 all as specified and directed.

M&L for any coloured vitrified heavy duty outdoor anti skid tiles 10 mm thick (Square/rectangular) polished, area of each tile exc 0.09 Sqm and but not exc 0.36 sqm, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles laid over and including 20 mm thick in cement plaster in CM (1:4) for fixing tiles all as specified and directed.

M&L 20mm thick Granite (of any type) machine cut, in wall lining, steps, jambs, pillars, window cills, skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing and including rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM (1:4) all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.

S&F framed work such as grills, gratings etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to FE 290 Gde -E-165 all as specified and directed.

S&F Mild steel 0.80mm thick, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles all as specified and directed.

M&L for preparation of new steel or iron surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

M&L for SS 304 grade stainless steel tubing (Square/Round/Rectangular) of suitable gauge as in SS guard bars, railings, SS frame works including all fixing arrangments, including taking down of old SS guard railing all as specified and directed.

M&L for preperation of old / new concrete kerb stone surfaces and applying two coats of retro-reflective enamel paint of any colours and patteren all as specified and directed .

Demolition of brick work including all quoins, arches, pillars etc. but excluding ashlar facings built in cement mortar all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 metre mean radius built in CM 1:6 all as specified & directed.

All as per item No-23 mentioned here in above but except bricks. (Serviceable bricks obtained from Item No- 22 above to be reused.)

M&L for precast cement concrete block masonary with solid blocks with 390x190x190 mm size exc 10 cmm in width and settting in mortar 1:4 type c-1 (1:3:6) all as specified and directed.

Cleaning of open drains completely by removing silt, soil, mud sludge, vegetation growth etc. and removing the same to out side MoD land all as directed by Engr-in-Charge for width of drains n. exc. 30 cm.

Cleaning of open drains completely by removing silt, soil, mud sludge, vegetation growth etc. and removing the same to out side MoD land all as directed by Engr-in-Charge for width of drains exc. 30 cm but n.exc. 60 cm .

Cleaning of open drains completely by removing silt, soil, mud sludge, vegetation growth etc. and removing the same to out side MoD land all as directed by Engr-in-Charge for width of drains exc. 60 cm but n.exc. 75 cm .

Cleaning of drains/culverts including removing & re-covering of RCC/CI/Steel covers by completely removing silt, soil, mud sludge, vegetation growth etc. and removing the same to out side MoD land all as directed by Engr-in-Charge for width of drains n. exc. 30 cm .

Cleaning of drains/culverts including removing & re-covering of RCC/CI/Steel covers by completely removing silt, soil, mud sludge, vegetation growth etc. and removing the same to out side MoD land all as directed by Engr-in-Charge for width of drains exc. 30 cm but n.exc. 60 cm .

Cleaning of drains/culverts including removing & re-covering of RCC/CI/Steel covers by completely removing silt, soil, mud sludge, vegetation growth etc. and removing the same to out side MoD land all as directed by Engr-in-Charge for width of drains exc. 60 cm but n.exc. 75 cm .

S&F in repairs 900mm x 600mm FRP manhole cover of 20 ton loading capacity with frame over manhole coping concrete all as specified and directed.

Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick all as specified & directed.

M&L PCC 1:3:6, type C2 (using 40 mm graded crushed stone aggregate) as in surface channels and drains, finished surfaces even and smooth using extra cement all as specified and directed.

Extra for forming fair finished drain or channel over 30 cm inner girth in cement concrete, using extra cement, including forming moulds, mitered/stopped ends all as specified and directed.

Taking down cement plaster of any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water all as specified and directed.

M&L for preparing new surfaces of walls/ceilings and applying two coats of weather proof acrylic exterior paint (100% Acrylic) over a coat of primer and scaffolding where required at any height for external painting all as specifed and directed.

M&L for preparing old surfaces of walls/ceilings and applying two coats of weather proof acrylic exterior paint (100% Acrylic) including scaffolding where required at any height for external painting all as specifed and directed.

M&L for filling cracks by cutting 'V' groove cracks of internal or external plaster of walls, ceilings/Chajjas all along the crack upto 10 mm and remove the loose plaster/concrete by suitable tools, filling cracks with crack paste compound and applying the second coat after 10-12 hrs of application of first coat and for external application must be coated with paint including necessary scafolding of any height all as specifed and direcetd.

M&L for cleaning all loose laitance on the wall and concrete substrate and applying one coat of epoxy bonding agent of SBR latex on exposed concrete surface to ensure bond between old concrete & new concrete by brush application including scafolding at any height all as specified and directed.

M&L for Ready mix plaster for internal / external wall rendering 15 mm thick in two coats of 10 mm base coat and 5 mm finishing coat on brick wall or concrete surfaces including taking down off old cement plaster and cement mortar and making groove of appropriate size and finishing sand faced finished using sponge, including use of scaffolding and removing debris outside MD land all as specified and as directed.

M&L for preparing the old painted plastered surface of external walls /ceiling/ chajjas/ /roofing concrete structure or any other similar structure Exterior walls are scrubbbed and scrapped thoroughly to remove smoke soot, moulds, moss and efflorsant salts, and mildew using steel wire brush. Mild solution (like bleaching powder in water) can also be used to get rid of mildew and algae from the walls. Walls need to dry completely. High pressure water jet can also be used to wash away dirt and any old paint flakes. Cracks need to be attended on priority. Cut in along the length of the crack using a knife. Crack Filling compounds are used to fill in the cracks. Surface is then sanded using sand paper to even out the surface all as specified and directed.

M&L for preparation of old painted steel surfaces of any description not otherwise described over 10cm in width or girth and applying one coat of synthetic enamel paint at any height including use of scaffolding where required for external painting of steel surfaces all as specified and directed.

Excavation in trenches not exc. 1.5 m wide and not exc. 1.5 m depth for cesspits, manholes etc. and getting out soft/loose soil even in foul position all as specified and as direcetd.

Returning, filling in, including spreading, leveling watering and well ramming in layers n. exc 25 cm in soft/loose soil all as specified and directed.

Removing excavated soil to a distance n. exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point all as specified and directed.

Demolition and breaking of drain pipes (SGSW/PVC/RCC etc) set in cement mortar of any type and of any dia all as specified and directed.

S&F 150 mm bore Reinforced concrete pipes, class NP3, laid and jointed complete with collars all as specified and directed.

All as per Item No-50 above but 300 mm bore.

M&L PCC 1:3:6, type C2 (using 40mm graded crushed stone aggregate) as in concrete bed to drain pipes of 150 mm bore including packing under, and haunching against the sides of pipes after they are laid and tested all as specified and directed.

All as per Item No 52 above but 300 mm bore all as specified and directed.

M&L for refixing of chequred tiles of any type and size including prepration of sub base and also including 20 mm thick screed bed in CM 1:4 , including takind out distrubed, loose or broken tiles all as specified and directed.

M&L for refixing of interlocking tiles including prepration of sub base and also including 25mm thick sand cushion including watter and ramming (Compacted) and joints filled with sand all as specified and directed.

S&F in repairs heavy duty cast iron manhole cover including frame of suitable size all as specified and directed.

M&L for providing fibre-reinforced cement concrete 1:2:4, type B2 (using 40 mm graded crushed stone aggregate) mixed with Dr Fixit hardner in foundation filling and mass concrete all as specified and directed.

Removal of debris outside of the MoD land in 5 cum dumper by collecting from various locations including lead & lift all as specified and directed by Engg-In-Charge.

Dismantling AC sheet roofing of any gauge, thickness, roof coverings including scafoldings of any height all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based trapezoidal/mangalore tile profile roofing sheets, chajjas, 0.50 mm thick of any colour/length having tensile strength of 550 MPA as in roof coverings having effective & overall width 1015 mm &1072 mm respectively, profile height 28.5 mm and centre to centre distance between ribs 203 mm fixed with self tapping screws as directed by manufacturer on wooden/steel members including scafoldings of any height of the bldg all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPA as in roof coverings /claddings to wall, fixed with self tapping screws including scafoldings of any height all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.

S&F for joist, channel, angle, or tee sections, or MS Flats fixed independantly without connecting plates, etc. Fe 410-W (Gde-E- 250) quality- A (cut to ordinary lengths i.e within 20mm of length indicated) as in frame work for Galvalume / CGI chajjas all as specified and directed.

M&L for preparation of old painted steel surfaces of any description not otherwise described over 10cm in width or girth and applying one coat of synthetic enamel paint at any height including use of scaffolding where required for external painting of steel surfaces all as specified and directed.

M&L for digital coloured glazed ceramic tiles 300x450x7mm or 600x300x7mm thick in vertical surfaces (including designed borders ) such as skirting and dados, set and jointed in neat cement slurry pointed in coloured cement to match the shades of tiles laid over rendering 10 mm thick on fair faces of brick work in CM (1:4) all as specified and directed. Note:- Rate of Designer border in vertical surface will be deemed into quoted rates.

MAHABIR INDUSTRIAL PRODUCTS (INDIA)

RAMESH ENTERPRISES

SN CONSTRUCTION

Bright Construction Co

David Construction Co.

Unity Enterprises

BOB ENTERPRISES

HINDUSTAN BUILDERS

SHREE JAGDISH FURNITURE CO.

Bidder Name

HINDUSTAN BUILDERS

Frends Enterprises

Unity Enterprises

RAMESH ENTERPRISES

SN CONSTRUCTION

BOB ENTERPRISES

David Construction Co.

Bright Construction Co

SHREE JAGDISH FURNITURE CO.

MAHABIR INDUSTRIAL PRODUCTS (INDIA)