CONSTRUCTION OF ROOMS AT THE INTEGRATED AGRICULTURE TRAINING CENTRE, UPPER SHILLONG

Amount

CIVIL WORKS BUILDING

Demolishing R.C.C. work including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

Demolishing brickwork including stacking of seviceable material and disposing of unserviceable material with in 50 m lead as per direction of Engineer-in-charge.

Supplying, fitting and fixing in position reinforcement bars upto 1st floor level, conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks,supports,chair,spacers etc complete(Rates inclusive of all wastage,lappings,hooks,chairs,anchorage etc and no measurement for the same required) c) Thermo-Mechanically Treated Bars

Centering and shuttering including strutting,propping etc. and removal of all form for all heights complete an as diected by Engineer in Charge. Columns,Pillars,Piers,Abutments,Posts ans struts (using steel)

Centering and shuttering including strutting,propping etc. and removal of all form for all heights complete an as diected by Engineer in Charge. Lintels, beams,plinth beams,girders, bressumers and cantilevers (using steel)

Centering and shuttering including strutting,propping etc. and removal of all form for all heights complete an as diected by Engineer in Charge. Slabs, roofs, landings, balconies and access platforms, shelves (using steel)

Centering and shuttering including strutting,propping etc. and removal of all form for all heights complete an as diected by Engineer in Charge. Edges of slabs and breaks in floors and walls (using timber) a) Under 20cm wide

Centering and shuttering including strutting,propping etc. and removal of all form for all heights complete an as diected by Engineer in Charge. Stairs/spiral staircase, (excluding landings (using timber)

Reinforced cement concrete work in wallls (any thickness), including attached pilasters, buttresses, fillets, columns, pillars, posts and struts etc. above plinth level upto first floor level, excluding cost of centering, shuttering, finishing and reinforcement: b)M20 or 1:1.5:3 (1 cement: 1.5 coarse sand: 3 grade stone aggregates 20mm nominal size

Reinforced cement concrete work in beams, slabs,roofs, roofs having slope up to 15 degrees, landing, balconies, shelves, chajjas. Lintels, bands, plain window sills, staircases and spiral staircases above plinth level upto first floor level, excluding cost of centering, shuttering, finishing and reinforcement: b) M20 or 1:1.5:3 (1 cement: 1.5 coarse sand: 3 grade stone aggregates 20mm nominal size

Extra over item No 6.2 to 6.8 above for each subsequent floor or part thereof above the first floor level.

Brickwork in cement mortar with first class brick in superstructure above plinth level upto first floor level in all shapes and sizes: a) Cement mortar 1:4 (1 cement:4 Coarse sand)

Extra over item No 6.2 to 7.3 above for each subsequent floor or part thereof above the first floor level.

Providing and fixing M.S fan clamp type I or II of 16mm dia M.S bar bent to shape with hooked ends in RCC slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete

Providing brick nogged wall with first class brick in cement mortar etc

Cement plaster in fine sand 20mm cement plaster of mix a)1:4 (1 cement: 4 fine sand

Providing and laying vetrified floor tiles in different sizes (thickness to be specified by manufacturer) with water absorption less than 0.08% and conforming to IS:15662 of approved make, in all colours and shades laid on cement based high polymer modified quick set tile adhesive (water based conforming to IS :15477, in average 6mm thickness including grouting of joints c) Deluxe

Providing and fixing !st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, in all colours and shades of any size as approved by Engineer-in Charge, in walls, skirting, risers of steps and dados, over 12mm thick bed of cement mortar 1:3 (1cement:3coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. c) Deluxe Range

Marble stone flooring with 18mm thick marble stone, as per sample of marble approved by Engineer-in charge, over 20mm (average) thick based on cement mortar 1:4 ( 1 cement: 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with: a) Markhana with second quality

Making plinth protection 50mm thick of cement concrete 1:3:6 (1cement:3coarse sand:6 graded stone aggregate 20mm nominal size) over 75mm thick bed of dry brick ballast 40mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling and dressing and finishing the top smooth.

Providing and fixing false ceiling at all height including providing and fixing framework made of special sections, power pressed from M.S sheets and galvanised with zinc coating of 120 gms/sqm (both sides inclusive) as per IS:277 and consisting of angle cleats of size 27mm and 37mm, at 1200mm centre to centre, one flange fixed to ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to angle hangers of 25x10x0.5mm of required length....complete as per drawings, specifications and direction of Engineer in Charge but excluding cost of painting with b)12.5mm thick tapered egde gypsum moistured resistant board

Providing woodwork in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required diameter and length. c) with 1st Class Local Wood i) Pooma/Hollock/Gamari/ and the like

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured) Panelling for panelled and glazed shutters 25mm to 40mm thick: c) with 1st Class Local Wood i) Pooma/Hollock/Gamari/ and the like

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required diameter and size, including necessary filling up the gaps at junctions i.e at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, all complete as per architecturel drawings and the directions of Engineer-in-charge. (Glazing, and panelling to be paid for separately. a) For fixed portion i) Anidised aluminium (anodised transparent or dyed to required shade according toIS:1868, Minimum anodic coating of grade AC 15)

Providing and fixing glazing in aluminium door, window, ventilator shutter and partitions etc with EPDM rubber/ neoprene gasket etc as per the architectural drawings and direction of the engineer-in-charge. b) With float glass panes of 4.0mm thickness (weight not less than 10kg/sqm

Finishing with textured exterior paint of required shade, including scaffolding: a) New work (Two or more coats applied @3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @2.20 kg/10 sqm

Applying priming coat: a) With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)/ with ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood.

Providing and applying plaster of paris of 2mm thickness over plastered surface to prepare the surface even and smooth complete

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade New work (Two or more coat)

Extra for carriage including loading and unloading complete beyond the initial lead of 5kms 1.1) Carriage for sand (30Km)

Extra for carriage including loading and unloading complete beyond the initial lead of 5kms 1.3)Carriage of Aggregates (30Km)

Extra for carriage including loading and unloading complete beyond the initial lead of 5kms 1.6) Carriage of Brickwork (30Km)

Extra for carriage including loading and unloading complete beyond the initial lead of 5kms 1.7) Carriage for steel (30Km)

Extra for carriage including loading and unloading complete beyond the initial lead of 5kms 1.5)Carriage for Cement (30Km)

Providing and fixing MS grillls of required pattern in frames of windows etc with MS flats, square or round barsincluding priming coat with approved steel primer…..complete b) Fixed to openings/wooden frames with rawl plugs screws….etc

INTERNAL WATER SUPPLY & SANITARY FITTINGS

Providing and fixing wash basin with C.I brackets, 15mm dia CP brass single hole mixer of approve quality and make, including painting of fittings and brackets….....etc….

Supplying fitting and fixing CPVC Pipes with all necessary fittings of SUPREME/ PRINCE/ SFMC/ FUSION brand or equivalent, in exposed or in trenches including trenching and refilling the same etc. complete as directed

Providing and fixing white viterous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings

Providing and fixing 600 x 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with CP brass screws and washers complete

Providing and fixing toilet paper holder: C.P Brass

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and makiing good the same including testing of joints complete as per direction of the Engineer-in-charge. Concealed work, including cutting chases and making good the walls etc. ii) 20mm nominal outer diameter

Providing and fixing white vitreous china flat stall urinal of size 580 x 380 x 350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P brass flush pipe, spreaders with uniom and clamps (all in CP Brass) with waste fittings as per IS:2556, C.I trap with outlet grating and other couplings in C.P Brass, including painting of fittings and cutting and making good the walls and floors wherever required: b) Range of two half stall urinals with 5 litre P.V.C automatic flushing cistern

Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet ( Anglo Indian W.C pan) with seat and lid fixed with C.P brass hinges and rubber buffers, 10 litre low level flushin cistern and fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with special of standard make and mosquito proof coupling of approved design complete, including painting of fittings and brackets, cutting and making good the walls and floor wherever required White vitreous china dual purpose WC pan with white solid plastic seat and lid white vitreous china flushing cistern and C.P. flush bend

Providing and fitting G.I pipes with G.I Fittings complete including trenching and refilling etc. External work (viii) 80mm diameter nominal bore

Making connection of GI distribution branch with GI main of following sizes by providing and fixing GI Tee, including cutting and threading the pipe etc…complete (b) 50 to 80mm nominal bore

Providing and fixing plain bend of required degree with sand cast iron S & S as per IS :1729 (a) 100mm

Providing and fixing double equal junction of rewuired degree with acess door, insershion rubber washer 3mm thick, bolts and nuts complete with sand cast iron S &S as per IS: 1729/ IS 3989 (a) 100 x 100 x 100 mm

Providing and fixing trap od self cleansing designed with screwed downd or hinged grating with or without vent arm complete in cluding cost of cutting and making good the walls and floor…..complete (a) 100 mm inlet and 100mm outlet

Providing and fixing PTMT waste coupling for wash basin and sink of approved quality and colour

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangements of approved quality and colour (b) 600mm

CONSTRUCTION OF ROOF TOP RAIN WATER HARVESTING

Earthwork in excavation by manual means upto a depth of 2m below the existing ground level for foundation trenches of foundations,footings of columns/walls, retaining walls,septic tank etc. including bailing out of water wherever necessary and removal of surplus earth with all lead and lifts as directed and specified for the following classification of soils. a) All kinds of soil (ordinary soil/hard soil/dense soil)

Providing soling in with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (b) Stone soling (i) 100mm

Plain cement concrete works in foundation bed for footing steps,walls, brick works etc. below plinth level as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). (b) In prop. 1:3: 6 (1 cement:3 coarse sand : 6 graded stone aggregate 20mm npminal size.)

Coursed rubble masonry (first sort) with hard stone in foundation and plinth with: (a) Cement mortar 1:6 (1 cement:6 coarse sand)

50 mm thick cement concrete flooring with concrete hardener topping, under layer 38mm thick cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 ( 1 cement hardener mix:2 graded stone aggregate 6mm nominal size) by volume,hardening compound mixed @2 litres per 50kg of cement or as per manufacturer's specification. This includes cost of cement slurry,complete.

Supplying, fitting and fixing in position reinforcement bars upto 1st floor level, conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks,supports,chair,spacers etc complete(Rates inclusive of all wastage,lappings,hooks,chairs,anchorage etc and no measurement for the same required) b) High Yield Strength Deformed Bars or TOR Bars

Centering and shuttering including strutting,propping etc. and removal of all form for all heights complete an as diected by Engineer in Charge. Foundation, footings, bases of columns,pile cap, raft for mass concrete (using steel)

Centering and shuttering including strutting,propping etc. and removal of all form for all heights complete an as diected by Engineer in Charge. Columns,Pillars,Piers,Abutments,Posts and Struts(using Steel)

Centering and shuttering including strutting,propping etc. and removal of all form for all heights complete an as diected by Engineer in Charge. Lintels,beams, plinth beams, girders, bressumers and cantilevers (using steel)

Centering and shuttering including strutting,propping etc. and removal of all form for all heights complete an as diected by Engineer in Charge. Slabs,roofs,landings,balconies and access platform,shelves (using steel)

Centering and shuttering including strutting,propping etc. and removal of all form for all heights complete an as diected by Engineer in Charge. Wall (any thickness) including attached pilasters,buttresses,plinth and string courses etc (using stell)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcements-All works upto plinth level: (b) M20 (1:1.5:3) (1cement:1.5 coarse sand:3 graded stone aggregates 20mm nominal size)

Reinforced cement concrete works in beam, slab, roofs having slope upto 15o landings,balconies,shelves,chajjas,lintels,bands,plain window sills,staircases, and spiral stair cases above plinth level upto first floor level, excluding the cost of centering,shuttering,finishing and reinforcement. (b) M20 (1:1.5:3) (1cement:1.5 coarse sand:3 graded stone aggregates 20mm nominal size)

Reinforced cement concrete works in walls (any thickness), including attached pilasters,buttresses,fillets,columns,pillars,posts and struts etc. above plinth level to first floor level, excluding the cost of centering,shuttering,finishing and reinforcement. (b) M20 (1:1.5:3) (1cement:1.5 coarse sand:3 graded stone aggregates 20mm nominal size)

Cement plaster 1:3 (1Cement: 3Coarse sand) finished with a floating of neat cement b) 20mm cement plaster

Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc. External Work vi) 50mm diameter nominal bore

v) 32mm diameter nominal bore

ii) 20mm diameter nominal bore

Providing and fixing brass stop cock of approved quality ii) 20mm diameter nominal bore

Providing and fixing brass bib cock of approved quality ii) 20mm diameter nominal bore

INTERNAL ELECTRIFICATION & FITTINGS Wiring in looping system with cooper PVC cable 250/440 volt grade of size 1.5 mm² of approved quality using PVC casing capping including 5 amperes switch Indian best quality celing rose etc. capable to a highest point.

(a) Long point wiring upto 10mts

(b) Medium Point upto 6mts

(c)Short point wiring upto 3mts

Wiring as in Item No.1 complete to a light plug point when fixed elsewhere. (a) Long point wiring upto 10mts(i) with copper conductor

Wiring as in item No.1 complete to a light plug point when fixed on the same board.

Wiring to a Power Plug as in item No.01 above with continous earth wire complete.

(a) Long point wiring upto 10mts

(b) Medium Point upto 6mts

Wiring as in item No.1 above to a Ceiling/ Exhaust Fan Point.

(a) Long point wiring upto 10mts

Wiring as in item No.1 above from the Stair Case/ Two way Switch wiring. (a) Long point wiring upto 10mts

Drawing of Main & Sub-main line with DGSD approved VIR or PVC 250/440 Volt grade in PVC casing capping complete with all accessories.

(a) With 2 x 2.5mm² Copper Conductor

(b) With 2 x 4mm² Copper Conductor

(c) With 2 x 6mm² Copper Conductor

Drawing of 3 phase main line 4 wire with DGSD approved VIR pr PVC cable 660 volt grade in casing capping with all accessories. (e) With 4x16 mm² copper conductor

Supplying and fixing wall/Floor mounted metal board of welded construction and fabrication with minimum(50x5)mm angle iron frame work with horizontal and vertical intermediate members of suitable angle/flat iron covered with 1mm MS sheet for mounting of switch gear including painting as required. (c) Iron frame board(1000x1000x200)mm

Supplying fitting and fixing complete heavy duty double break fuse switches HBC Fuse Type in sheet enclosure 50 HZ 415 V .3 Pole with Neutral(T.P.N) (d) 200 Amp Capacity

Supplying fitting and fixing complete 240/415V Al.Busbar Chamber. (ii) TPN 4 Ways (d) 200 Amp 415 V Capacity

Supplying & fixing of Load Konkaket Miniature Circuit Breakers DX3 MCB's for AC application till 63 A. A. Single Pole 240/410 V (b) 6-32 Amp

Supplying fitting & fixing of DX3 Isolators for AC applications upto 125A.

A. Double Pole 240 V (b) 40 Amp

A. Double Pole 240 V (c) 63 Amp

C. Four pole 240 V (d) 100 Amp

Supplying fitting & fixing of of Distribution Board ETPN DB's for MCB,Isolator,RCCB and RCBO D. IP 54 -#1K 09 (b) 6 Way(8+18) Modules

Supplying fitting & fixing of of Distribution Board Duo Boxx A. With White Classic Door (a) 1 Way 6 Module

Supplying fitting and fixing of LED Batten surface or wall mounted with all necessary accessories. (b) With Aluminium housing & integrated electronic driver. (iv) 24 W(1182x23x37)mm

Supplying fitting and fixing of exhaust fan double bearing self lubricating type single phase 50Hz 250 V AC operated complete with supporting frame,fan blades,nuts and bolts and other petty accessories as required. (a) Domestic Exhaust Fan (iii) 250 mm

Supplying fitting and fixing of delux type chandelier made of brass fancy type longitudinal glass,rod or chain as pendent ring LED bulb etc complete with all accessories. (i) 5 lamp glass chandelier fitting.

Supplying fitting and fixing of WELL GLASS Verticle surface mounting pressure die-cast aluminium housing and control gear compartment well glass luminaires with all necessary accessories. (i) 30W

Supplying fitting and fixing of Water Heater(geyser) of 1.5 kw/3 Kw with pressure release value including all necessary accessories as required. (c) 25 litres capacity

Supplying fitting and fixing of A.C with heating and cooling facility including supply of all necessary accessories as required for installation of Air Conditioner(AC) (b) 2 Ton Capacity

Supplying fitting and fixing of Copper lighting Arrester with 5 nos.Finger at the top&copper base plate at the bottom complete. (a) with 3 ft high Copper rod

Supplying fitting and fixing of MFE 40,G.I Chemical Earthing electrode filled with CMM and Back fill compound(BFC) (a) Diameter:50mm Length:2 meter

Supplying fitting and fixing of Industrial type socket 15 Amp complete with all necessary accessories as required. 15 Amp Industrial Socket

Supplying and laying of 15mm x 5 mm GI/Copper Strip at 0.50mts,below ground (a) With 25 mm x 5 mm copper strip

Supplying of Luminous 4500+ optimus 48/V Inverter

Supplying of 12 V tall tubular Battery 200/AH

NADSINGH SUKHLAIN (BID ID -4534)

Hilarious Ymbon (BID ID -4490)

M Kharkongor Enterprises (BID ID -4543)

FORWARD L MAWONG (BID ID -4553)