8311/E8

Amount

Demolition of brick work , built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

Dismantling floor, hearth or wall glazed tiling including cement mortar bedding (but not backing), removing the debries all as specified and directed.

Taking down chowkats or frame, n.exc 1.5 Sqm each with shutters (without taking off shutter from the frame) complete all as specified and directed.

Taking down chowkats or frames, exe 1.5 Sqm but n.exc. 4 Sqm in each with shutter (without taking off shutter from the frame) complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but n. exc 2 Sqm each complete all as specified and directed.

Taking down and refixing of shutters of any description exc 1 Sqm but n.exc 2 Sqm each in the same opening after easing, adjusting and also replace unservicable building hardwares complete all as specified and directed by Engr-in-Charge. Note:- Builders Hardwares shall be measured and paid saperately.

Dismantling timber scantlings 40 Sq.cm and over in section, in any position complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, in roof covering including ridges complete as specified and directed.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed

Taking up or down 15 mm bore steel tubing and connection including cleaning for refixing including necessary scaffolding and saftey masures complete all as specified and directed.

All as per item No. 10.0 here-in-before but 20 mm bore.

All as per item No. 10.0 here-in-before but 25 mm bore.

All as per item No. 10.0 here-in-before but 40 mm bore.

Material and Labour for Plain cement concrete 1:2:4, type B-1, (using 20 mm graded stone aggregate) for embedding holdfast, bed block, cills, etc including necessary form work complete all as specified and directed.

Material and Labour for Cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required for depth of embedded portion of holdfasts n. exc. half brick complete all as specified and directed.

"Supply only" Liquid water proofing compound (ISI marked) complete all as specified and directed.

Material and Labour Brick work with fly ash bricks of designation 7.5, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 complete all as specified and directed

Material and Labour Second class hardwood, scantlings, wrought, in unframed work complete all as specified and directed.

Refixing old serviceable Second class hardwood, scantlings, wrought, in unframed work complete all as specified and directed.

Supply and fix in repairs 2nd class hardwood plain filltes square, rectangular in section wrought fixed with nails of sectional area exc 6 Sqcm and n.exc 13 Sqcm complete all as specified and as directed.

Supply and fix in repairs 2nd class hardwood plain filltes square, rectangular in section wrought fixed with nails of sectional area exc 13 Sqcm and n.exc 25 Sqcm complete all as specified and as directed.

Supply and fix Well seasoned 2nd class hard wood plain, solid, straight chowkat and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

Supply and fix 35 mm thick, glazed/skeleton shutters with second class hard wood,open rebated and prepared to receive glass, gauze, etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. The Sizes of members of shutters as specified in SSR Part I, Section -8, clause 8.24 (a) complete as specified and directed

Supply and fix 35 mm thick, 2nd class hardwood, factory made, Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Material and Labour Solid PVC door frame of size 50mm x 47mm made out of 5mm dual coloured PVC sheet used instead of plain colour PVC sheet and edge will be painted to match with printed sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing as per directed by Engr-in-Charge.

Supply and fix Factory made Solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with 5mm thick heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain coloured PVC sheets for top rail, lock rail and bottom rail on either side and as gap inserted for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable sheet beded and jointed together with solvent cement all as specified.

Supply and fix factory made 35 mm thick, Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Supply and fix Solid PVC Wall Lining consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame including 5 mm thick PVC sheet fillet of width 35mm for wall Paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing including taking down old unserviceable PVC wall lining complete as directed by Engr-in-Charge.

Supply and Fix 18/19 mm thick pre-laminated particle board medium density flat pressed single layer type or three layers type with BWR type adhesive as in cup board shelf, Pelmets, wall paneling etc commercial finished both side and properly seald with 5mm thick 2nd class hard wood beading (including French Polishing for beading) after taking down old unserviceable partical board complete all as specified and as directed.

Supply and Fix Steel windows with side hung shutters of 'Z' section including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded including one shop coat of red oxide primer complete all as specified and as directed.

Supply and Fix Steel windows with side hung shutters of 'Z' section including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded including one shop coat of red oxide primer complete all as specified and as directed.

Supply and fix stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aparture 1.40 mm and fixed with stainless steel wire staples complete all as directed.

Supply and fix in repairs stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aparture 1.40 mm and fixed with stainless steel wire staples complete all as directed.

Supply and fix 150mm Aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fix 200mm Aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fix in repairs 150mm Aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fix 300mm aluminium, anodised sliding door bolt with hasp, staple(bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed.

Supply and fix in repairs 300mm aluminium, anodised sliding door bolt with hasp, staple(bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed.

Supply and fix 100mm butt hinges stainless steel complete all as specified and as directed.

Supply and fix 100mm butt hinges medium weight cold rolled mild steel complete all as specified and as directed.

Supply and fix in repair 100mm butt hinges medium weight cold rolled mild steel complete all as specified and as directed.

Supply and fix 75mm butt hinges medium weight cold rolled mild steel complete all as specified and as directed.

Supply and fix in repair 75mm butt hinges medium weight cold rolled mild steel complete all as specified and as directed.

Supply and fix 100mm size aluminium handle cast type anodised complete all as directed.

Supply and fix 150mm size aluminium handle cast type anodised complete all as directed.

Supply and fix in repairs 150mm size aluminium handle cast type anodised complete all as directed.

Supply and fix in repair door closer made up of aluminium die cast body hydraulically regulated for adjustable closing and latching speed (designation No. 2) suitable for door shutters suitable for door shutters of 701 to 850 mm in width and 36 to 60 Kg weight complete all as specified and as directed by Engr-in-Charge. Make: Godrej Cat No. 9363 or equivalent of approved make.

Material and Labour in repair for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass, other part made of mild steel heavy duty all as directed including taking down old one complete all as specified and as directed.

Supply and fix Aluminium door with powder coated anodized aluminium frame of section of size 101.60mm x44.75mm x 2.40mm ( Jindal section 14021) thick, with shutter of style of member of size of 85mm x 44.45mm x 2.00mm ( Jindal Section 19560), top/ bottom rail of member size 114.30mm x 44.45mm x2.15mm ( Jindal section 19574) and lock rail of member size 100mm x 44.45mm x 2.0mm thick ( Jindal section 19564) with rubber gasket and aluminium glazing clip beading and mortice lock arrangement, handle aluminium anodized 150mm long ( 01 No), tower bolt 200mm long aluminium anodized (01 No), rollers etc complete all as specified and as directed. Note:- Cost of glazing shall deemed to be included in the rate quoted and cost of mortice lock shall be measured and paid separately Under relevent item of these Schedule.

Supply and fix Powder coated aluminium sliding window (three tier) of frame size 92mm x 31.75mm x 1.5mm thickness ( Section No. 20831 of Jindal) and shutter of size 40mm x 18mm x ( 9mm for interlocking legs) x 1.45mm thickness ( Jindal section of 20737), two shutter glazed covering half of span of opening with 5mm thick plain glass including necessary fittings and fixtures and one shutter covering half of opening with stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with steel staples including aluminiumm snap beading incliding aluminium anodized handles 100mm long complete all as directed by the Engineer-in-Charge. Note: Measurement shall be taken clear opening i.e. out to out of window frame as a whole. Cost of of wire cloth and glazing shall deemed to be included in the unit rate quoted by the tenderer.

Dismantling aluminium door shutter including assembly exc 1 Sqm but n. exc 2 Sqm and repair for proper functioning by replacing moving assembly like floor spring, pivot, hinges etc. and re-erecting the shutter including straightening, cutting, tighting of door shutter and easy movement of the shutter including replacing of motrice lock, door handles, rubber glass beading all as specified and directed by Engr-in- Charge.

Supply and fix Mild steel work as in band, strap, hold fast, cleat, support, hook, hinges, base tie for door frame etc and other similar items conforming to Fe-410-0 or Fe-310-0 complete all as specified and as directed.

Material and Labour Rolled mild steel section as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe-410-W (Gde-E-250) quality A all as specified and directed by the Engr-in-Charge as in reapairs.

Supply and fix 0.50mm thick pre-painted galvalume aluminium zinc coating @ 150 gms/Sqm GI based corrugated steel sheets of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as in roof complete all as specified and directed by the Engr-in-Charge.

Supply and fix 0.50mm thick pre-painted galvalume aluminium zinc coating @ 150 gms/Sqm GI based plain steel sheets of any colour having tensile strength of 550 Mpa as in ridges,hips,valley gutters,drip and straight flashing, fixed with self tapping screws as in roof complete all as specified and directed by the Engr-in-Charge

Supply and fix 4mm thick E-board classic any design plain of size 595 x 595 mm fixed as in ceiling over aluminium grid suspended with GI hooks 6mm dia and clamp to hold GI pipe of the following section including taking down old unserviceable one:- a) 25 x 25 x 1.5mm(Minimum thick) aluminium angle b) 25 x 25 x 1.5mm (Minimum thick) aluminium cross Tee. c) 25 x 35 x 1.5mm (Minimum thick) aluminium main Tee , including applying two coats of acrylic emulsion distemper after preparation of surface complete all as specified and directed by Engr-in-Charge.

Material and Labour in repair of 16-18mm thick granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, wall cladding and like in CM(1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick backing course in CM 1:4 including necessary edge moulding/chamfering (full or half moulding) complete all as specified and directed.

Material and Labour Vitrified ceramic tiles , double / ultra charged, 9-10 mm thick (square / rectangular) polished, area of each tiles exc 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and as directed by Engr-in-Charge.

All as per item No.59.00 here-in-before but on vertical surfaces such as skirtings, dados, risers etc over and including 10mm thick backing course in CM 1:4 complete all as specified and directed.

Material and Labour Coloured glazed ceramic tiles in vertical surfaces 450X300X7-8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing course in CM 1:4 complete all as specified and directed.

Supply and fix coloured glazed ceramic tiles 600x300x7-8mm thick on vertical surface such as skirting, dado, set and joint in neat cement slurry and pointed in white/coloured cement to match with existing surface including 10mm Thick backing course in CM 1:4 complete all as a specified and as directed

Material and Labour Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished the surfaces even and smooth without using extra cement complete all as specified and directed.

Material and Labour Rendering 10mm thick cement plaster on ceiling surfaces in CM 1:4 including necessary scaffolding and finished the surfaces even and smooth without using extra cement complete all as specified and as directed.

Material and Labour Rendering 20mm thick in cement mortar 1:4 on fair faces of brick work or concrete surface in two layers each 10mm thick mixed with integral water proofing compound @ 2% by weight of cement(WPC shall be mixed with top layer only) finished the surfaces even and smooth without using extra cement upto any height of building with necessary scaffolding and safety measure complete all specified and as directed. Note : - Water proofing compound shall be measured and paid separately as "Supply only".

Material and Labour Preparation of new plastered surfaces and applying two coats of Acrylic distemper of any colour / tint over a coat of primer over 3 mm thick wall care putty (Birla/Asian) on wall surfaces complete all as specified and directed.

Material and Labour for complete removal of existing finishes and applying two coats of Acrylic distemper of any colour / tint over a coat of primer over 3 mm thick wall care putty (Birla/Asian) on wall surfaces including rubbing with emmery paper to make wall surface smooth complete all as specified and directed.

Material and labour White wash, three coats on newly plasterd ceiling surfaces including necessary preparation of surfcaes complete all as specified and directed by the Engr-in-Charge.

Materials and Labour Exterior emulsion paint ( weather coat) of any colour / tint , two coats over a coat of primer on newly plastered external surfaces surfaces including necessary preparation of surfaces upto any height of building with necessary scaffolding and safety measure complete all as specified and as directed.

Supply and fix 3 mm thick, sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete including hacking out old unserviceable broken glass all as specified and as directed.

Material and Labour Preparing new steel surface of any description, over 10 Cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint of any colour / tint over a coat of red oxide primer complete all as specified and as directed.

Material and Labour Preparing new surface of wood or wood based material of any description and in any position not otherwise described exc 10 Cm width or girth and applying two coats of synthetic enamel paint of any colour / tint over a coat of pink primer complete all as specified and as directed.

Material and Labour Preparation of old wooden surfaces of any description, n.exc 10 Cm width or girth and applying one coat of synthetic enamel paint of any colour / tint complete all as specified and directed.

Material and Labour Preparation of old steel surfaces of any description, n.exc 10 Cm width or girth and applying one coat of synthetic enamel paint of any colour / tint complete all as specified and directed.

Supply and fix tubes 15mm bore medium grade galvanised with all fittings and fixed including necessary scaffolding and saftey masures complete to wall and ceiling or laid in floors.

All as per item No. 75.0 here-in-before but 20 mm bore.

All as per item No. 75.0 here-in-before but 25 mm bore.

All as per item No. 75.0 here-in-before but 40 mm bore.

Refixing old steel tubing 15mm bore and connection in new or old position (wall, ceiling, floor etc.) including necessary scaffolding and saftey masures complete all as specified and directed.

All as per item No. 79.0 here-in-before but 20 mm bore.

All as per item No. 79.0 here-in-before but 25 mm bore.

Supply and fix 110mm dia PVC(SWR) rain water pipe fixed on walls, ceilings and floors incl GI/PVC clamps, bends sockets etc including taking down old unserviceable PVC pipes with fittings complete all as specified and directed

Supply and fix in repair Vitreous china urinal flat back of size 465X355X265mm white with grating & union for discharge pipe including Urinal spreader of PTMT any colour for fixing with 15mm dia pipe (Minimum weight 60gms) but excluding flushing cistern, flush pipe & waste pipe but fixing only automatic flushing cistern with bracket flush pipe etc complete all as specified and directed. Make:- Hindware Cat No 600001 or as specified in list of make given in particular specification.

Supply and fix 40 mm dia PVC pipe with bend complete fixed on walls, ceilings and floors including GI/PVC clamps, bends sockets etc incl taking down unservicable old PVC pipes complete all as specified and directed.

Supply and fixing in repair PVC bathroom mirror cabinet box of size 500x400mm fixed on walls complete all as specified and directed. Make:- Prayag Cat Part No. 556 or equivalent in Polytuff/ Parryware/ Cera.

Supply and fix in repair 15mm Bib Taps, fancy type, CP, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule. Make : Essco Cat No. MQT -512KN or eas specified in list of make given in particular specification.

Supply & fix in repair 15mm Pillar Taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and fly-nuts, screwed for iron pipe. Make : Essco Cat No. MQT 507KN or as specified in list of make given in particular specification. Prayag.

Supply and fixing Angular Stop cock 15 mm dia cast copper alloy chromium plated fancy type with wall flunch concealed type screwed for iron pipe etc. complete all as directed including taking down old unserviceable stop cock. Make- Essco cat part No. MQT 526AFKN or as specified in list of make given in particular specification.

Supply and fix in repair 25mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 40mm - 690 gms) complete all as directed by Engineer-in-Charge. Make: Prayag Cat part no.153 or as specified in list of make given in particular specification.

Supply and fixing in repairs Stop cock 25 mm dia cast copper alloy screwed for iron pipe etc. complete all as directed including taking down old unserviceable stop cock.

Supply and fixing in repairs Stop cock 20 mm dia cast copper alloy screwed for iron pipe etc. complete all as directed including taking down old unserviceable stop cock.

Supply and fixing in repairs Stop cock 15 mm dia cast copper alloy screwed for iron pipe etc. complete all as directed including taking down old unserviceable stop cock.

Supply & fix in repair CP bottle traps ( with internl partitions) 32mm size with 250mm long wall connection and wall flange complete all as directed by Engineer-in-Charge.. Make : Essco cat part No. ALE-773ML 190X125 or as specified in list of make given in particular specification.

Supply and fixing in repair Kitchen sink with draining board made of stainless steel 1mm thick with plug, washer, waste pipe including bedding in cement mortar to wall or including fixing cantiliver bracket and connecting union to pipe over all size 914mm x 460mm bowl size 405mm x 354mm x 203mm including waste coupling and waste pipe complete all as specified and directed. Make- Prayag Cat Part No 1239D or as specified in list of make given in particular specification.

Supply and fix in repair CP grating 100 mm size fixed with white cement complete all as directed.

Supply and fix in repair vitreous china EWC cascade type white including cistern ,seat cover, inlet accessories complete all as specified and as directed by Engr-in-Charge. Make- Parryware, Cat Part No- C844A Qube or as specified in list of make given in particular specification.

Supply and fixing in repair two way bib cock 15 mm bore with flange cast copper alloy chromium plated fancy type screwed for iron pipe brass ferrule etc. complete all as directed. Make- Essco cat part No. MQT -512ANKN or as specified in list of make given in particular specification.

Supply and fix in repair chromium plated toilet paper holder fixed on wall with screws complete all as directed. Make:- Essco cat Part No. AEC 1151 or as specified in list of make given in particular specification.

Supply and fix in repair PVC connection 600 mm long fixed to 15mm GI pipe complete all as specified and directed.

Supply and fixing in repair 10 litre capacity low level PVC flushing cistern (any colour), syphonic action type, with inlet, ball valve, float, handle, fixed with cast iron bracket (of suitable size) and providing 32 mm dia PVC flush pipe and making all necessary connections complete as directed. Make : Parryware Model No C-8090 or as specified in list of make given in particular specification.

Supply and fix as in repair CP Health Faucet With 1Mtrs Tube & Hook all as directed by Engineer - in - Charge . Make- Essco cat Part No. ALE-ESS-583 or as specified in list of make given in particular specification.

Supply and fix in replacement vitreous China wash down water closet pan (pedestal pattern), white, with ‘P’ or ‘S’ trap, front or back inlet, including fixing bolts, PVC seat cover and mild steel chromium plated hinging device (but excluding flusihng cistern and flush pipe) complete all necessary connections. Make: Parryware Cat No. C0287 or as specified in list of make given in particular specification.

Supply and fix 550x400 size vitreous china wash basin white including 32 mm waste coupling of PTMT (half or full threaded, minimum weight 45 gms), waste pipe low density polyethylene pipe 32mm bore and brackets including taking down old wash hand basin alongwith fittings all as specified and as directed. Make:- Hindware Cat No. 10010 or as specified in list of make given in particular specification.

Supply and fix Rotational moulded HDPEe water storage tanks of capacity 2000 litres, multilayer . ISI marked, hoisted and fixed in position, cylindrical vertical with closed top with dismantling of tank including necessary scaffolding and saftey measures upto any height of building all as specified and directed. Make of Water Tank:- As specified in list of make given in particular specification.

Supply and fix in repair CP soap dish in cluding nessary connection complete all as specified and directed. Make-Essco cat part No. AEC 1131 or as specified in list of make given in particular specification.

Supply and fix in repair CP towel rail, 20mm dia, 'D' type, 60 Cm long between flanges complete including fixing arrangement complete all as specified and directed. Make-Essco cat part No. AEC 1111 or as specified in list of make given in particular specification.

Supply and fixing in repair PTMT towel ring fixed with CP brass screws complete all as specified and directed. Make-Prayag cat part No. 1961 or as specified in list of make given in particular specification.

Supply and fix in repairs Plastic water closet, seat, white, closed pattern with flat bottom and cover and Cp or aluminium hinging device complete all as specified and asd directed. Make-Commander / Cera / Prayag/ Parryware/ Hindware.

Cutting/uprooting of tree from walls of bldgs. up to extended root and spraying of acid of required qty at any location of blog up to 4 storied & making good disturbed surfaces with cm 1:4 or cement concrete 1:3:6 type C1 using 20mm graded aggregate including necessary scaffolding/ through rope with safety belt for size of tree of girth 5 to 10 cm complete all as specified and as directed by Engr -in-charge.

Cleaning of all debris/vegetation over roof surfaces of any height and the mouth of rain water pipe and around the tanks area and removal of materials out side the MOD land complete all as specified and directed by Engr-in-Charge.

BHASKAR SUPPLY AGENCY

JHAWAR SUPPLIERS

PODDAR SALES CORPORATION

JOY RAM ENTERPRISE

Rounaq Enterprise

CONSTRUCTION AND MAINTENANCE ENGINEERING CORPORATION

J B NATH AND SON

M/S J S ENTERPRISES

S.S.ENTERPRISE

Tirupati Buildcon Pvt. Ltd.

BHARUKA ENTERPRISES