Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹4.7 LAdmitted-Finance | -33.00% | ₹4.7 L | L1 | Admitted-Finance |
| 2 | L2₹4.8 LAdmitted-Finance | -31.11% | ₹4.8 L | L2 | Admitted-Finance |
| 3 | L3₹5.1 LAdmitted-Finance | -27.62% | ₹5.1 L | L3 | Admitted-Finance |
| 4 | L4₹5.1 LAdmitted-Finance | -27.05% | ₹5.1 L | L4 | Admitted-Finance |
| 5 | L5₹5.2 LAdmitted-Finance | -26.10% | ₹5.2 L | L5 | Admitted-Finance |
Updated dates
Tender Value
₹7 L
EMD Value
₹14,000
Closing Date
1 Apr 2026, 2:00 pmClosed
General Manager (Works)
Office of Additional Chief Executive Officer, Shri Amarnathji Shrine Board, Jammu/Srinagar
Construction of New sheds at Baltal for JK Bank behind JPCR .
2026_SASB_306420_1
SASB/eNIT/2026/04
Open Tender
Civil Works
30 days
Baltal Axis
Please refer Tender documents.
2 documents required · 2 mandatory
₹944
J and K Bank 0110040100014077
₹14,000
18 Apr 2026
19 Mar 2026
2 Apr 2026
19 Mar 2026
1 Apr 2026
19 Mar 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | Item Code |
|---|---|---|---|---|---|---|
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth All kinds of soil | 4.7 | cum | 467.15 | ₹2,195.61 | BI01010001010000000000000515BI0100001128 |
| 2Providing and laying in position cement concrete of specified grade including curing excluding cost of centring and shuttering all works up to plinth level.1:4:8(1 cement :4 coarse sand : 8 graded stone aggregate 40 mm nominal size) nallah stone | ||||||
| 3Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level . 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). | ||||||
| 4Dumping stone excluding cost of stones in Horizontal on level. (All quanitites subject to actual measurement at site). | ||||||
| 5Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) sand : 4 graded stone aggregate 20 mm nominal size) | ||||||
| 6Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes | ||||||
| 7Providing and fixing pre-coated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm+/-5% total coated thickness (TCT), Zinc coating 120 gsm as per IS:277 in 240 mpa stee grade 5-7 microns epoxy primer on both sides of the sheet and polyster top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer –in-charge. The sheet shall be fixed using self drilling/ self tapping screws of size (5.5 x 55 mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I limpet washers filled with white lead complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | ||||||
| 8Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm | ||||||
| 9Providing and fixing precoated galvanised steel sheet roofing accessories0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm) | ||||||
| 10Providing and fixing wooden panelling 9mm in thickness one side laminated of approved make as per direction of engineer in charge. | ||||||
stage.html
html • 0.04 MB
techsummary_994916.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.23 MB
BOQ_994916.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid
