CERTAIN REPAIR TO DRAIN RCC DRAIN COVER GRATING AND OTHER MISC WORK UNDER AGE BR II FOR CABS STIR CEMILAC BANGALORE

Amount

Dismanling Sructural steel work including door, gates but excluding framed work complete all as directed

S & F Mild steel work as in doors ,gratings or gate of angle Rungs in static tank of other section gusset plate rails ladder & Hand rail including welding securing bolts including cutting tops to shape as directed, drilling holes etc conforming to Fe 410 -O or Fe 310 - 0, complete all as specified and directed by Engineer-in-Charge

M&L preparation of new or previously untreated Steel surfaces & priming with red oxide and applying two coats of synthetic enamel paint of any description, over 10 cm in width or girth, not otherwise described complete all as specified and as directed

Demolition of brick work, for drain,brick work ,concrete or stone boulder masonry built in cement mortar complete .

Demolition of reinf cement concrete in any description and in any position not otherwise specifically provided , (reinforcement cut as required to fecilitate demolition ) below or above ground level.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for.

S&F FRP gratings 120 x 1220 x 38 mm FRP Grating including cutting of pcc by machine and making good surface - Yellow ±5mm fixing as per direction of Enge in Charge.

S&F 40 mm FRP Angle Yellow / Gray Yellow ±5mm fixing as per direction of Engr in Charge.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed

M&L for providing precast cover slab in 1:2:4, type B-1 (using 20mm graded stone aggregate) complete all as specified and as directed

Excavation in trenches not exceeding 1.5 m deep for foundation, etc in soft soil specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm

Removing of demolition/excatated materials to a distance exc. 1.5 KM, but n.exc 5.0KM and depositing out side MD land.

M&L for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation,subbase and similar works complete all as specified and as directed

M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) 75mm thick as in flooring and similar works complete all as specified and as directed

M & L for Walling of random rubble (Bangalore type), regular coursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and as directed

M & L for Walling of random rubble (Bangalore type), regular coursed, well bonded, bedded and solidly hearted, built in CM 1:6 but except Stone all as specified but except stone complete all as specified and as directed

M&L for pre-cast cement concrete, type C1 (PCC 1:3:6), block masonry with solid blocks, exc 10 cm in width and setting mortar in CM 1:6 complete all as specified and as directed

M&L for providing PCC 1:2:4 Type B1 in coping (using 12.5mm graded stone aggregate) including necessary form work complete all as specified and as directed

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses Hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc.20mm

M&L for providing PCC 1:2:4 type B2 (using 20mm graded stone aggregate) in surface channels & drains complete all as specified and as directed

Extra for forming fair finished drain or channel 30 to 60 cm inner girth in cement concrete using extra cement including forms,moulds, mitred/stopped ends etc.

S & F TMT steel bars 10 mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking end and binding with and including MS wire annealed not less than 0.9 mm dia.

S & F TMT steel bars 6-8 mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking end and binding with and including MS wire annealed not less than 0.9 mm dia.

M&L for pcc 1:3:6 type C2 75 mm thick (using 40 mm graded stone aggregate) as in plinth protection finished even and smooth.

Dismantling Interlocking Paver as specified and directed.

Supply and fix Machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade with gray cement and no pigment complete all as specified and as directed

Labour only removing undulation interlocking paver block making good surface and refixing in same place

Material and Labour for sand filling under floor including watering, consolidation, and well ramming complete all as specified and as directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.

M&L for desilting and cleaning drain from mud, hard material like stone/brick etc complete all as directed.

Taking down plastering on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc.

M&L rendering 15 mm thick stone masonry wall surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and as directed

M&L preparation of new concrete surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed.

M&L preparation of Old concrete surfaces as in kerb stone of any description over 10 cm in width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed.

Cleaning of Cattle trap from manhole/ side of drain after cleaning dispose off debris from out side MD land up to 5 KM from site

Ravees Enterprises

SHRI NARAYANADRI ENGINEERS & BUILDERS

K. VENKATESH NAIDU

S R CONSTRUCTIONS

Teleconcepts (India) Pvt Ltd

SAPTHAGIRI CONSTRUCTIONS

ANAND REFRIGERATION

SRI AYYAPPA ENTERPRISES

Sreyas Enterprises

DIVYA CONSTRUCTIONS