Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.4 LAccepted-Finance SALEM | SALEM | ₹13.4 L | L1 | Accepted-Finance L1 |
| 2 | L2₹17.1 LAccepted-Finance 150 VILLARASAMPATTI NAAL ROAD NASIYANUR ROAD VILLARASAMPATTI POST ERODE 638 107 | ERODE | TAMIL NADU | 638107 | ₹17.1 L | L2 | Accepted-Finance L2 |
| Sl No | Description | Qty | Unit | Coral rewinding India Private Limited L2 | Delta Roto Tech Private LimitedV L1 |
|---|---|---|---|---|---|
| 1.00 | 6.6 KV STATOR REWINDING (Resin rich technology) Charges for dismantling of motor, threading out the rotor, removing the wedges, Debrazing the connections for releasing the old coils, releasing all the 60 Nos. coils from the stator core pack, conducting hot spot test in stator core and placing the new coils and inserting the wedges back, replacement of all 12 Nos. RTD’s, making proper connection after feeding the new coils, brazing and insulating the links and take off leads, applying finishing varnishing to the overhang portion and drying work, cleaning the rotor, checking the rotor bars, checking the shaft trueness, varnishing and ovening, replacement of DE & NDE bearings, assembling of motor, conducting relevant tests on the motor and painting of the motor with two coats of smoke grey enamel paint. | 1 | Nos | 2,46,000 ₹2.5 L | 1,33,300 ₹1.3 L |
| 2.00 | FABRICATION OF NEW COILS : Charges for fabrication and supply of new stator coils using new class ‘F’ enamelled polymica covered electrolytic grade rectangular copper conductors, insulating the slot portion of the coil with semicatherm and insulating the overhang coil with semicaflex and fibre glass tape using epoxy as binding cement and conducting required tests. (Retrieved coils shall be retained by the contractor) | 60 | Nos Coils | 20,260 ₹12.2 L | 17,500 ₹10.5 L |
| 3.00 | STATOR CORE RESTACKING : Charges for removing the stator core pack from the stator body, complete dismantling the stator core stampings, removing the old burnt core palt varnishes by chemical treatment, cleaning, removing the surface kinks, revarnishing with core plate varnish, restacking the stampings, locking and repositioning the core pack in to the stator body by hydraulic press and conducting the flux loop test to ascertain the restacked core healthiness and conducting the hot spot test. (If required) | 1 | Nos | 1,04,700 ₹1.0 L | 95,000 ₹95,000 |
| 4.00 | Charges towards providing sleeve for NDE side housing bearing seating area. (If required) | 1 | Nos | 17,900 ₹17,900 | 8,497 ₹8,497 |
| 5.00 | Charges towards providing sleeve for DE side housing bearing seating area. (If required) | 1 | Nos | 8,360 ₹8,360 | 9,000 ₹9,000 |
| 6.00 | Charges for Machining, metalizing the DE side shaft bearing seating area with suitable low melting Electrode, stress relieving the welded portion, machining of rotor shaft suitable with DE side new bearing, grinding including conducting dye penetrate test on welded portion. (If required) | 1 | Nos | 60,000 ₹60,000 | 48,500 ₹48,500 |
| 7.00 | Charges for Machining, metalizing the NDE side shaft bearing seating area and outer Cooling Fan seating area with suitable low melting Electrode, stress relieving the welded portion, machining of rotor shaft suitable with NDE side new bearing, grinding including conducting dye penetrate test on welded portion. (If required) | 1 | Nos | 87,400 ₹87,400 | 48,000 ₹48,000 |
| 8.00 | DYNAMIC BALANCING :Charges for dynamic balancing the rotor to grade G 2.5 at rated RPM. | 1 | Nos | 24,000 ₹24,000 | 20,306.5 ₹20,306.50 |
| 9.00 | Charges towards supply and replacement of 1 No. NU 226 E-XL-M1-OP- C3 Brass cage ‘FAG’ India make bearing. | 1 | Nos | 18,500 ₹18,500 | 36,650 ₹36,650 |
| 10.00 | Charges towards supply and replacement of 1 No. 6226 C3 ‘FAG’ Imported make - Steel cage new bearing. | 1 | Nos | 17,000 ₹17,000 | 36,600 ₹36,600 |
Tender Value
Refer Docs
EMD Value
₹20,200
Closing Date
17 Feb 2026, 2:00 pmClosed
CHIEF ENGINEER/MTPS-I
CHIEF ENGINEER MTPS-I METTUR DAM
MTPSI ES Circle EMII SDI Complete rewinding of one number FD fan Motor 4B Sl No 44270 T401 11-01, BHEL Make ,6.6KV, 1250KW,1487 RPM-due to unequal current between the phases
2026_EB_650746_1
CE-MTPSI-SE-ES-EM2-OT119-25-26
Open Tender
Electrical Works
60 days
MTPS-I/METTURDAM
AS PER TENDER SPECIFICATION
4 documents required · 4 mandatory
₹0
₹20,200
Yes
25 Feb 2026
3 Feb 2026
18 Feb 2026
3 Feb 2026
17 Feb 2026
3 Feb 2026
6.6 KV STATOR REWINDING (Resin rich technology) Charges for dismantling of motor, threading out the rotor, removing the wedges, Debrazing the connections for releasing the old coils, releasing all the 60 Nos. coils from the stator core pack, conducting hot spot test in stator core and placing the new coils and inserting the wedges back, replacement of all 12 Nos. RTD’s, making proper connection after feeding the new coils, brazing and insulating the links and take off leads, applying finishing varnishing to the overhang portion and drying work, cleaning the rotor, checking the rotor bars, checking the shaft trueness, varnishing and ovening, replacement of DE & NDE bearings, assembling of motor, conducting relevant tests on the motor and painting of the motor with two coats of smoke grey enamel paint.
FABRICATION OF NEW COILS : Charges for fabrication and supply of new stator coils using new class ‘F’ enamelled polymica covered electrolytic grade rectangular copper conductors, insulating the slot portion of the coil with semicatherm and insulating the overhang coil with semicaflex and fibre glass tape using epoxy as binding cement and conducting required tests. (Retrieved coils shall be retained by the contractor)
STATOR CORE RESTACKING : Charges for removing the stator core pack from the stator body, complete dismantling the stator core stampings, removing the old burnt core palt varnishes by chemical treatment, cleaning, removing the surface kinks, revarnishing with core plate varnish, restacking the stampings, locking and repositioning the core pack in to the stator body by hydraulic press and conducting the flux loop test to ascertain the restacked core healthiness and conducting the hot spot test. (If required)
Charges towards providing sleeve for NDE side housing bearing seating area. (If required)
Charges towards providing sleeve for DE side housing bearing seating area. (If required)
Charges for Machining, metalizing the DE side shaft bearing seating area with suitable low melting Electrode, stress relieving the welded portion, machining of rotor shaft suitable with DE side new bearing, grinding including conducting dye penetrate test on welded portion. (If required)
Charges for Machining, metalizing the NDE side shaft bearing seating area and outer Cooling Fan seating area with suitable low melting Electrode, stress relieving the welded portion, machining of rotor shaft suitable with NDE side new bearing, grinding including conducting dye penetrate test on welded portion. (If required)
DYNAMIC BALANCING :Charges for dynamic balancing the rotor to grade G 2.5 at rated RPM.
Charges towards supply and replacement of 1 No. NU 226 E-XL-M1-OP- C3 Brass cage ‘FAG’ India make bearing.
Charges towards supply and replacement of 1 No. 6226 C3 ‘FAG’ Imported make - Steel cage new bearing.
Charges towards supply and replacement of 1 No. NU 2034 E-XL- M1- C3 Brass cage ‘FAG’ Imported make bearings.
To and fro transport charges including transit insurance, loading & unloading. (Lumsum)
Retrieved saleable copper scrap (420 Kg).
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.65 MB
BOQ_780263.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid