Estimate for renovation of Room for Smart Metering Control Room at City Electrical Division, HPSEBL, Shimla-171001

Amount

Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground, all complete as per direction of Engineer-in- Charge.For door/ window/ clerestory window

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area beyond 3 sq. metres

Dismantaling of Old wooden workstations & Partitions. Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Providing and laying in position specified grade of cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size)

P/L vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc.,complete. Size of tile 600x600 mm

P/F 2mm thick PVC antistatic venyl flooring plain or coloured, carbed or mosaic/metalled finish laid with approved adhesive on sub-floor (damp proofing treatment to be paid for separately)

15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix :13.8.1 1:3 (1 cement: 3 fine sand).

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.

Providing and fixing Pre -laminated medium density fibre board exterior grade (Grade-I) IS:14587:1998 marked, to frame, backing or studding with screws etc. complete ( Frames, backing or studding to be paid separately).

Pre-laminated with decorative lamination on both side exterior Grade - I MDF Board 18 mm thick confirming to IS:14587

Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. 40 mm

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete.Double strip (horizontal type)

Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete.125 mm

Providing and fixing HYDRAULIC HINGES for cabinats, almirah and lockers of approved quality including necessary screws etc. complete.

Providing and fixing 1 mm thick lamination sheet of approved shade and quality fixed with approved adhesive and nails complete including carriage of material within all leads and lifts. For pasting on existing cupboards.

Providing and fixing WPC panels of approved shade over wooden partition wall with 9mm ply board over wooden frame including cost of installation.

Providing and fixing WPC panels of approved shade over wooden framework including cost of installation

P/F partition wall made with 6mm ply board finished with 1 mm laminate with wooden frame work.

Providing and fixing Wooden Workstation made in 18MM prelaminateed MDF board fixed over painted MS frmae work as per design with provision of pullout drawer and to place CPU. Including Glass partition and Edge binding tape of approved brand fixed with Pro bond adesive complete as per instruction of EIC.

Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in- Charge. (Single / double glass panes and silicon sealent shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Casement door with top hung ventilator with 3D and S.S. friction hinges (400 x 19 x 1.9mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ±. 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.(Area of door upto 2.50 sqm)

Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately)

Casement window single panel with S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series)frame 67 x 60 mm & sash 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 0.75 sqm.)

Providing and fixing Foldable fiber mesh side hung for window

P/F Roller blinds of approved fabric and brand

Providing and fixing 10 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in- charge (including Door handle, lock and stopper etc.)

Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance > 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm. With 15 mm thick tegular edged light weight calcium silicate false ceiling tiles.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Electrical Wiring Items:-

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing & capping and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. (group c)

Wiring for light plug with 2x1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing & capping along with 1 No.1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing & capping along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Wiring for circuit / sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing & capping along with 1 No.HRFRLS /PVC insulated single core copper conductor cable of same size for earthing as required.2x10 Sq. mm.

Supplying & fixing of G.I. modular boxes of following sizes along with modular base and cover plate for modular switches in recess as required:-

Modular base and cover plate, 12 module

Modular base and cover plate, 8 module

Modular base and cover plate, 4 module

Supplying & fixing following size modular base and cover plate on the existing modular metal boxes as required:-

Modular base and cover plate, 12 module

Modular base and cover plate, 8 module

Modular base and cover plate, 4 module

Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required.

A 5 pin, 5/ 6 Amps Modular socket outlet.

B 6pin, 15/ 16 Amps Modular socket outlet.

D S.P. 5/ 6 Amps one way Modular switch.

C S.P. 15/ 16 Amps one way Modular switch.

Supplying and fixing call bell / buzzer suitable for D.C. / A.C. single phase, 230 volts, complete as required.

Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-Double pole. Cat-A.

Supplying and fixing of following way triple pole and neutral, sheet steel MCB distribution board, 415 volts, on surface / recess, with provision for 4-pole MCB/ Isolator/RCCB/RCBO as incomer and SP MCBs as outgoing, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-Double door-12 way (8+36), horizontal type

Supplying and fixing following rating, four pole (three phase & neutral) 415 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required. 100 Amps. Cat-A.

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:- Single pole. Cat-A.

Supplying and fixing of 36 watt light of 595X595 mm on ceiling.

Supplying and fixing of data wiring and points.

FIRE ALARMING SYSTEM

Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required.

Supplying, installation, testing & commissioning of manual call box of ABS type in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.

Supplying, installation, testing & commissioning response indicator on surface/recess MS box having two LEDs metallic cover complete with all connections etc. as required.

Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required.

Supplying, installation, testing & commissioning talk back slave station in surface/recess suitable for operation on simplex mode complete with P.T.T. knob & speaker/microphone enclosed in a M.S.(16 SWG)/ ABS box with break glass in front etc. complete as required.

Supplying, installation, testing & commissioning sector panel suitable for 04 zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required. 17.1.9.1 4 zone

Fabrication of mounting of Floor Mounted/Wall Mounted structure and its mounting with providing, testing and commissioning of Co2 Type 4.5kg Fire Extinguishers ISI Marked confirming IS: 15683 and latest amendment thereof complete with hose horn, squeeze grip release valve, locking arrangement, operation manual, complete in all respect as per direction of Engineer-in-Charge

Fabrication of mounting of Floor Mounted/Wall Mounted structure and its mounting with providing, testing and commissioning of Water Fire Extinguisher 6 Liter Stored Pressure type ISI marked confirming to IS:15683, complete with delivery hose, squeeze grip, release valve, locking arrangement, pressure gauge, operation manual, complete in all respect as per direction of Engineer-in-Charge

Fabrication of mounting of Floor Mounted/Wall Mounted structure and its mounting with providing, testing and commissioning of Powder Fire Extinguishers 2kg (Store Pressure Type) duly ISI Marked confirming IS: 15683:2006, with IS 14609, ISI marked and latest amendment thereof, ABC POWDER Complete with squeeze grip release valve, locking arrangement, pressure guage, operation manual complete in all respect as per direction of Engineer-in-Charge

Fabrication of mounting of Floor Mounted/Wall Mounted structure and its mounting with providing, testing and commissioning of FIRE extinguisher (DRY POWDER) 04kg (Store Pressure Type) duly ISI Marked confirming IS: 15683:2006, with IS 14609, ISI marked and latest amendment thereof, including replacement of damaged accessories with squeeze grip release valve, locking arrangement, pressure guage at Sub-Station Dargi complete in all respect as per direction of Engineer-in-Charge

Providing, fixing, testing and commissioning of Tea Coffee Vending Machine (Make :Godrej/Nescafee) complete in all respect as per direction of Engineer-in-Charge

Providing, fixing, testing and commissioning of Auto Hot Case Ideal for Offices Make:Warmex/Hotline/Osham/Equivalent for 24 Hour Shift Duty Staff complete in all respect as per direction of Engineer-in-Charge

Providing, fixing, testing and commissioning of Induction Cook Top (Make:Phillips/ Prestige) complete in all respect as per direction of Engineer-in-Charge

Providing, fixing, testing and commissioning of Eureka Forbes Ltd AQUAGUARD REGAL UV+UF 6.2 L UV + UF Water Purifier (Black) complete in all respect as per direction of Engineer-in-Charge

Providing, fixing, testing and commissioning of Hot Water Electric Kettle Steel 1.5 Ltr (Phillips make) complete in all respect as per direction of Engineer-in-Charge

Providing Crockery Set :La Opala-12 each full & Quarter Plates, 24 Bowl, 3 Dongas, 1 Rice Plate, 18 Borosil Water Glass, 1 Water Jug Borosil, 1 Napkin Holder, 1 Set Table Mats, 1Tray, 12 Cup & Saucer, 1 Cutlery Set complete in all respect as per direction of Engineer-in-Charge

Providing, fixing, testing and commissioning of Wall Mount Fan Room Heater 2000 watt with remote (Make/Model:Warmex Superb) complete in all respect as per direction of Engineer-in-Charge

Providing, fixing of 6 Seater Conference table of Godrej make complete in all respect as per direction of Engineer-in-Charge

Providing, fixing of PISA Sofa Two Seater of Godrej make complete in all respect as per direction of Engineer-in-Charge

Providing, fixing of PISA Sofa single Seater of Godrej make complete in all respect as per direction of Engineer-in-Charge

Providing, fixing of Victoria Coffee Table of Godrej make complete in all respect as per direction of Engineer-in-Charge

Providing, fixing of MOTION High Back Revolving Chairs of Godrej make complete in all respect as per direction of Engineer-in-Charge

Providing, fixing of Edward Corner Table of Godrej make complete in all respect as per direction of Engineer-in-Charge

Providing, fixing of Marvel Executive Chair of Godrej make complete in all respect as per direction of Engineer-in-Charge

Providing, fixing of Atlanta Visitor Chair Wooden of Godrej make complete in all respect as per direction of Engineer-in-Charge

Providing, fixing of Bravo mid back Revolving Chairs of Godrej make complete in all respect as per direction of Engineer-in-Charge

Kuldeep Sharma

Devi Prakash Sharma