Construction of 50 Bedded Critical Care Block (G plus 3) at Malda Medical College and Hospital, Malda - SITC of Lift. (2nd Call)

Amount

SITC of automatic Lift (as per manufacturer design as per detailed spectfication below conforming to IS) and putting into operation after final testing in the existing shaft complete with all accessories and reparing the damaged wall /floor if any etc to complete as required..

Make:- OTIS/KONE/SCHINDLER

Type : Bed cum Passenger MRL Lift (Without Machine room)

Load : 20 Passenger /1360 Kg.

Control: Microprocessor based with AC Variable Voltage & Variable frequency (VVVF)

Machine: Energy Efficient Machine ; Gearless, without Machine Room.

Speed : 1.0 Mtr. /Sec.

Floor Served : G + 3

Landing : 4 (Four) lands ; All on same sides

Total Rise : 15.9 Mtr. (Approx) [Bidder should follow the CGA drawing/ Visit the site, as applicable]

Operation : Microprocessor based Duplex full collective with or without attenedent.

Signals : Digital Car postion indicator, car travels direction indicator in car and at all landing with call registration indicator. COP & LOP must have stainless steel face plate silver brushed with surface mounted button with braille. Button : All buttons on car & landing shall be luminous & encoded with braille on/off switch for Lift, fan, light, toggle switch or key switch for automatic/attendent mode of operation. Display type : Monochrome/ Colour LCD / Segmented LCD/ Scroll. Operation Push Buttom for lift maintenance & service should be on top of the car.

Travelling Accuracy: ± 5mm (Micro Levelling Arrangement)

Car Inside : 1300 mm (W) X 2400 mm (D) × 2200 mm (H)

Car Entrance : Clear Opening 1200 mm (W) X 2000 mm (H) protected with car door.

Car Encloser: Stainless Steel Sheet (20SWG) with hair line finish with hand rail.

Car Ceiling & Lighting : Stainless Steel with hair line finish with LED Lighting & Fan.

Car Ventilation : Axial fan with anodised aluminium / SS grill.

Car Flooring : Decorative Granite Flooring (As per direction of EIC and according to departmental order.)

Car Door : Stainless Steel Centre Opening (COPD) / Telescopic Opening (TSPD) automatic door provided with V3F controlled door drive system.

Landing Door: Stainless Steel Centre Opening (COPD) / Telescopic Opening (TSPD) automatic door provided with V3F controlled door drive system with fire rating of 120 min.

Door Opening: Automatic Power operated door with full length photocell assembly curtain sensor.

PROTECTIVE DEVICES & OTHER ACCESSORIES :-

ARD: Automatic rescue device complete with dry maintenance free batteries as required for automatic evacuation to the nearest floor in case of power failure / single phasing/others.

Overload Protection:Fully loaded with overload protection. On overloading condition the lift car will not start with door remaining open and give audio & display indication.

Emergency Lighting In Car: Battery operated emergency lighting in the lift car.

Intercom System: Battery operated Intercom System in Lift Car, Machine Room & Control Room.

Emergency Alarm: Battery Operated alarm bell system in Lift Car & Control Room.

Fireman switch : Fireman switch placed at ground floor.

Voice Synthesizer: Voice announcement system (Voice Synthesizer) in the car to announce the position of the elevator in the hoist way as the car passes or stops at a floor served by the lift.

Car Parking at top floor at idle condition.

Main Wire Rope/ Belt : As per manufacturer's standard conforming to IS.

Auto fan Cut-Off

DIMENSION OF SHAFT & POWER SUPPLY :-

Available Shaft Dimension: 2350 mm (W) X 2950 mm (D)

Pit Depth: 1800mm ( Bidder should visit the site)

Overhead: 4800mm ( Bidder should visit the site)

Electric power supply: AC 415V, 3Phase, 50Hz terminated in machine room as per IS.

External Monitoring system through MOD BUS RS485.

MINOR MASONARY WORK :-

If the gap between the door frame and wall structure is up to ± 50 mm then the cost should include the required minor masonary works needed to plug the gap , if necessary, as per direction of EIC.

Terms & Conditions (i) Rate should be quoted inclusive of all applicable taxes and duties including GST. (ii) All materials, equipments & accessories must conform to relavent IS /IEC specifications. (iii) The Lifts must be warranted atleast for 12 months from the date of Commissioning. (iv) Rate should be quoted including cost of minor civil works, wall cutting and mending good the damages to the original finish.

Kone Elevator India Pvt. Ltd. (BID ID -6951316)