Supply erection and commissioning of new pumps of New Pumps for flood protection works at Tail regulator Permanent Pump House at jassiya drain out falling into drain no-8 in Water Services Mechanical Division, Rohtak.

Supply, Erection & Commissioning of 60 C/s axial/Mix Flow Water lubricated Vertical Pumps 740 RPM Having Lift of approx 9.0 tryt with Y body, delivery pipe, MS Bend with eproxy coating from inside & outside i/C flange welding SS Nut & Bolts siphon breaker valve with mouth bend etc I/C any leftover complete in all respect as per site requirement by making suitable space arrangements for the additional installation of pumps in the existing structure i.c shafting of the existing pump sets as per site condition and per approved specifications of department.

Supply Erection and Commissioning of solid shaft motor of capacity 325 HP of 8 pole 740 rpm 3 phase 415 Volt with efficiency class IE2 (as per IS 12615 with latest amendments) suitable for 60 Cs Vt axial flow pumps type vertical flange mounted and as per approved technical specification with earthing of motors and with LT Single core XLPE insulated armoured cable Aluminium conductor of suitable size from motor to starter.

Supply, Erection & Commissioning of 10 C/s axial/Mix Flow Water lubricated Vertical Pumps of 10 Cs. Discharge at 1440 RPM at static head of approx 6.0 Mtr. with Y body, including MS Bend including flange welding, SS Nut & Bolts etc complete in all respect as per site requirement with epoxy coating & as per approved specifications of the department

Supply, Erection & Commissioning of solid shaft Motor of capacity 60 HP, 1440 rpm, 3 Phase, 380 Volt+- 10%, with eficiency class IE2 suitable for fitment with 10 Cs. V.T axial/mix flow pump type vertical flange mounted as per approved specifications of the department

Supply, Erection & Commissioning of 250 A fully automatic Star Delta Starter suitable for 60HP Motor as 1 incomer of MCCB 250A with one number MCB for lighting load with all allied item like MCCB, Contactor, rating 150 amp,120amp,90amp, all type of protection relays (over voltage, Under Voltage, Over Current, single phasing preventer, delay switch), Power factor correction capacitor, digital meter, bus bar, thimble etc suitable and all live parts should be covered as per site demand and compartment coated with epoxy coating as per approved technical specification of department

Supply, erection and commissioning of LTDB star delta panel of 300 AMP Capacity including att accessories complete in all respect suitable for operation of 3 No motors of capacity of 50 HP as per approved specifications of the department.

Supply, Erection & Commissioning of MCC/LT pannel in control room of pump house of 1000 Amp incomer ACB 4 pole with 3 no outgoing each of having MCCB of 800 Amp alongwith an additional MCCB of 63 Amp for lighting loads, indicators relays, Meters, push buttons, bus bars with 3 no fully automatic ATS starter (Complete in all respect like micro controller based fault protaction devices/relays, indicators timer etc.) of 325 HP with each MCCB 800 Amp with contactor rating 700 Amp, 550 Amp, 440 Amp, with designed capacitor bank of suitable capacity with 8 step APFCR, selector switch, duty contactor discharge register, digital display instruments and other allied accessories for automatic as well as mannual operation of capacitor bank suitable for 2 No Motor of capacity of 325 HP with a stand of MS channel (1' up from floor) as per approved specifications of the deptt. with earthing alongwith LT single core cable aluminium conductor XLPE insulated armoured cable of suitable size from transformer to MCC as neutral with thimbles along phase cable as per site requirements complete in all respect & as per approved makes.

Supply, Erection & Commissioning of M.S delivery Pipe 341.4 mm inner dia made of 6 mm thick MS Plate both end flanged (in >= 6 Mtr Pieces) as per approved specification & Make. (Including SS Nut & Bolt, Rubber Sheet 1/8" & other fitment accessory required)

Providing Complete double side plate earthing with 2 Earth Pits on both sides of sump well by boring and lowering 1.5" GI pipe, Filling Boring with Charcoal, copper strips, salt and fixing base plate, connecting this main earthing through copper strips/wire upto motors and panel as per site requirement