SPL REPAIRS TO BUILDING NO BCD 45 (II) 47 (OR TOILET) OF ASC CENTRE (SOUTH) UNDER GE (CENTRAL) BANGALORE

Amount

Dismantling plain or corrugated steel sheeting,any gauge thickness,including Nainital or similar pattern roof coverings complete all as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as directed.

Demolition of brick work,precast concrete block walling or stone boulder masonry,built in cement mortar including all quoins,arches,pillars,etc complete all as directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as directed.

Taking up or down 20 mm steel tubing and connections complete all as directed.

Taking up or down 25 mm steel tubing and connections complete all as directed.

Dismntling 1000 lit water tanks,open or closed,hoisted and fixed in position complete all as directed.

Taking down cement plaster on Brick / Concrete surfaces incl raking out joints, hacking for key scrubbing down with water and removing rubbish to out side MD Land complete all as directed.

Raking out joints/ pointing to squared rubble masonry,coursed or uncoursed complete all as directed.

Dismantling any type of Floor or Wall tiling including cement mortar bedding (but not backing) and removing rubbish to out side MD Land complete all as directed.

Taking down chowkhats or frames n.exc 1.5 Sqm (with out taking off shutters from the frame) complete all as directed.

Demolition of drain/PVC pipe any dia including fittings complete all as directed.

Dismantling framed timber scantling fillets,rails, posts,rafters,purlins,etc under 40 Sq.cm in section complete all as directed.

50mm x 47 mm size PVC solid door frame of size made out of 5mm plain Colour PVC sheet reinforced with MS square tube , supplying and fixing in opening as per specification and drawing shown in SSR 2004 Part II. complete all as directed.

30mm thick factory made solid panel PVC door shutter (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain Colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for stiles and plain Colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain Colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement supplying and fixing in the frame at site as per specification and drawing shown in SSR 2004 Part II. complete all as directed.

Steel ventilators with top hung shutter including hinges,steel peg stay,complete all as directed.

Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as directed.

Preperation of new steel surfaces and applaying two coat of synthetic enamel paint over a coat of red oxide,zinc chrome complete all as directed.

4 mm thick figured glass,pin head type and glazing with oil putty in squares n exc 0.50 sqm in each pane complete all as directed.

2nd class wrought timber framed and fixed in scantlings complete all as directed.

75 mm Butt hinges , medium weight, cold rolled, mild steel complete all as directed.

125 mm anodised extruded aluminium alloy handles fabricated type complete all as directed.

125 mm aluminium anodised barrel tower bolts of extruded section complete all as directed.

100 mm long aluminium anodised barrel towerbolts of extruded section and fixed complete all as directed.

100 mm extruded aluminium alloy handles fabricated type complete all as directed.

S&F in repair 100 mm long aluminium anodised barrel towerbolts of extruded section complete all as directed.

S&F in repair 100 mm extruded aluminium alloy handles fabricated type complete all as directed.

Preparing new wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as directed.

Preparing Old wood or wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as directed.

Wind ties for roof including securing bolts,drilling holes,notching for wire,etc..flat iron fillets including all necessary drilling,bolting or riveting,etc,and similar works conforming to Fe-290-Gde E-165 complete all as specified and directed.

Preparation of new steel surfaces of any description n exc 10 cm width or girth,priming and applying two coats of synthetic enamel paint when unconnnected with other painting or when painted in different tint complete all as directed.

Preperation of old steel surfaces and applaying one coat of synthetic enamel paint complete all as directed.

Providing,cement concrete1:3:6 type C1,(20 mm graded aggregate) in roof kerbs or mud stops,rounded or chamfered on edges complete all as directed.

Pre painted galvatume aluminium zinc coating (AZ-150) GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/Cladding to wall,fixed with self tapping screws complete all as directed.

Pre painted galvatume aluminium zinc coating (AZ-150) GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/Cladding to wall,fixed with self tapping screws complete all as directed.

Nonskid ceramic coloured tiles 10 mm thick (square/rectangular) area of each tile exc 0.06 sqm but not exc 0.11 Sqm,in floors etc..set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed of CM 1:4,10 mm thick complete all as specified and directed.

Glazed Ceramic Coloured joint free tiles 350x250x 7mm/450x350x7 to 8 mm thick as in Dado/Skirting/Steps etc set and jointed in neat cement slury and pointed in coloured cement to match over 10mm thick backing Coat in CM 1:4.Complete all as specified and directed.

25 mm thick cement concrete type B-1,1:2:4 (20 mm graded aggregate) is used for levelling course complete all as specified and directed.

Cement concrete Type E2 1:5:10 (40 mm graded aggregate) in foundation filling and mass concrete complete all as specified and directed.

110 mm PVC (SWR) pipes single socketed,in any length with rubber ring joints,laid in trenches or in floors complete all as specified and directed.

110 mm PVC (SWR) pipes single socketed,in any length with rubber ring jointsfixed to walls complete all as specified and directed.

75 mm PVC (SWR) pipes single socketed,in any length with rubber ring joints,laid in trenches or in floors complete all as specified and directed.

75 mm PVC (SWR) pipes single socketed,in any length with rubber ring jointsfixed to walls complete all as specified and directed.

PVC (SWR) bends 75 mm with access door complete all as specified and directed.

PVC (SWR) bends 110 mm with access door complete all as specified and directed.

PVC (SWR) junction single,(single T) 110 mm with access door complete all as specified and directed.

PVC (SWR) junction single,(single T) 75 mm with access door complete all as specified and directed.

PVC (SWR) 110 mm vent cowl complete all as specified and directed.

75 mm PVC (SWR) floor trap,plain with grating including jointing with solvent cement complete all as directed.

75 mm PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as directed.

Rendering 10mm thick in CM 1:6. finished even & smooth without using extra cement to walls all as complete all as directed.

M&L for raised pointing to squared rubble masonry,coursed or uncoursed using cement mortar 1:4 complete all as specified and directed.

Preparation of Newly Plastered surfaces of wall and applying Three coats of white wash complete all as directed.

Complete removal of existing treatment and applying two coats of white wash on walls complete all as directed.

Precast cement concrete block (Type C1 1:3:6 20 mm graded aggregate) masonry with solid block,exc 10 cm in width and setting in cement mortar 1:6 complete all as directed.

Precast cement concrete block (Type C1 1:3:6 20 mm graded aggregate) masonry with solid block,exc, 10 cm in width and setting in cement mortar 1:4 complete all as directed.

Pre cast RCC (1:2:4) type B1 for pre cast slab for cooking platform/man holes and set in cement mortar (1:6) complete all as directed.

Mildsteel deformed ,TMT bars 10 mm cut to length bend to shape require including cranking hooping ends binding in & wine annealed not less than 0.9 mm dia or securing with clips complete all as directed.

Mildsteel deformed ,TMT bars 6 to 8 mm cut to length bend to shape require including cranking hooping ends binding in & wine annealed not less than 0.9 mm dia or securing with clips complete all as directed.

Rendering 10mm thick in CM 1:3. finished even & smooth without using extra cement to roof slab with water proofing compound complete all as directed.

Supply only water proofing compound complete all as specified and directed.

APP based polymeric membrane minimum weight 3 Kg/ Sqm and minimum 3 mm thick reinforced with polyster non wove fabric (wt.not less than 150 gms/Sqm) land on primed surface by forced application complete all as directed.

PCC 1:3:6 type C1 using 20mm graded aggregate of 75mm thick as in Plinth Protection complete all as directed.

S&F in repair Vitreous China Squatting Pan"Orissa pattern" size 580 mmx440 mm white with integral foot rest etc. including PVC Flushing cistern,PVC connection 450 mm and flush pipe, S or P Trap & Provision of concrete bedding and making good to floor complete all as directed.

S&F in repair Vitreous China Wash hand basin , white flat back size 550x400 mm including brackets(including Pillar Tap 15 mm bore Chromium plated cast copper alloy with capstan heads, 32 mm waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts & PVC waste pipe) including PVC connection 450 mm long complete all as directed.

S&F in repair Vitreous china urinal, bowl type size of 430 x 370 x 340mm white with grating and union of discharge pipe (back or corner wall type) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, flush pipe, grating and union for discharge pipe and 32mm dia PVC waste pipe including 450mm long PVC connection & 15 mm dia push tap complete all as directed.

S&F in repair vitreous china urinal partition white of size 310x700 mm complete all as directed.

Supplying and laying of 25mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as directed.

Supplying and laying of 20mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as directed.

25 mm dia Ball valve complete all as directed.

20 mm dia Ball valve complete all as directed.

Rotational moulded polyethylene water storage tanks1000 lit capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including 20 mm dia float valve and HDPE 25 mm wter tank nipple complete all as directed.

Disconnecting existing tank (Exc 500 & N exc 1000 lit capacity) setting aside (or lowering if required) for repairs,cleaning,etc.. and hoisting if required reconnecting and re-fixing in position (cleaninig repairing,etc measured separately) complete all as directed.

S&F in repair 15 mm stop valves,cast copper alloy,screwed down,high pressure,with crutch or butterfly handle fancy type chromium plated screwed both ends for iron pipe or for unions and fixed complete all as directed.

S&F in repair 15 mm Bib taps,cast copper alloy,screwed down,high pressure,with crutch or butterfly handle fancy type chromium plated screwed both ends for iron pipe or for unions and fixed complete all as directed.

S&F in repair 15 mm bore stop valves,cast copper alloy,fancy type,chromium plated with long shank and cup washers complete all as directed.

S&F in repair 15 mm Swivel shower with shower arm of PTMT any colour complete all as directed.

S&F in reapair towel rail 600 mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats.(Minimum weight 190 gms) complete all as directed.

Shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 300 gms) complete all as directed.

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings, fans etc and making good distrubed surfaces of wall, floors, etc complete all as directed.

Point wiring with FRLS 1.5 sqmm (normal aea) PVC insulated and unsheathed cable, single core, multistranded,1100 volts grade, copper conductor cable (red colour cable for Phase and Black colour cable for neutral), laid in and including PVC casing and capping with accessories (size of casing and capping as required at site) including FRLS 1.50 sqmm PVC insulated stranded copper conductor cable (green colour) as earth continuity conductor and connected to common earth dolly and MS terminal box with 3mm thick masonite laminated sheet top cover fixed on wall for one light and fan point controlled by one switch complete all as specified and directed for following :-

One light or fan point controlled by one 5 Amps switch one way

Switch piano, flush button single pole, 5 Amps one way complete all as directed.

Ceiling rose surface bakelite 65x50mm three terminals including supply and fix PVC square blocks complete all as directed.

Surface and wall mounted LED battern tube light fitting 20 watts extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver 230 volts all pre wired fixed on walls with all fixing accessories such as 2 Nos of PVC square/ round boxes screws etc and connecting up with three core flexible copper conductor cable of size 24/0 20 sqmm complete all as specified and directed. Make : CG Cat Part No CCS-100-20-65-HL2-DP-NWH or eqivalent in Havells/Bajaj/Philips

S&F in replacement sheet metal enclosure (ISI marked) distribution board for 240 volts SPN 4way horizontal type double door single pole and neutral with 200 Amps rated neutral copper bus bar for housing MCB and fixed flush in wall surface and tested on completion complete all as directed.

MCB single pole 6 to 32 Amps 240 volts, 10 kA rupturing capacity providing in DB complete all as specified.

MCB single pole and neutral 6 to 32 Amps 240 volts, 10 kA rupturing capacity providing in DB complete all as specified.

S&F in replacement of exhaust fans AC single phase 230/240V of size 300mm sweep with louver and old exhaust fan deposit to E/M office complete all as directed.

Cutting holes into or through but in stone masonary wall of 38cm thick suitable for 300mm sweep exhaust fan and making good in cement morter 1:3 or cement concrete 1:2:4 type-I cement mortar B-I as required (which works out =10.5x38cm=399/-) the rate including cutting toothign and bonding the new to old complete all as directed.

Preparation of old plastered surface including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots complete all as directed.

Preparation of newly plastered surfaces of exhaust wall opening and applying three coat of white wash complete all as directed.

Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr connected to galvanized earth lead wire 4 mm dia as earth lead up to 7.5 mtr long including protection pipe 25mm bore medium grade and watering pipe by means of nuts, bolts, thimbles, check nuts and washers etc made of galvanized iron connected to earthing test point all as shown in electrical plate No 3 of SSR Part-I 2010 and as specified or indicated and testing on completion including earth work and excavation in any type of soil PCC (1:3:6) type C1 chamber, pre cost slab 40mm thick in cement concrete (1:2:4) type B1 with 8 mm dia MS bars reinforced at 10 cm centre to centre both ways including funnel with watering pipe wire mesh and lugs, including testing and dismantling of old earthing complete all as directed.

docileworx

HRML CONSTRUCTIONS

SHREE BANASHANKARI ASSOCIATES

Sangam Construction