REPAIR TO CHARPOY IP FOLDING AND CONVERSION OF CHARPOY GI PIPE INTO CHARPOY PLY TOP AT OFFR MD ACCN AND OLD NAVY NAGAR UNDER GE NW NOFRA COLABA MUMBAI

Amount

Following nature of work will be executed at diffrent location at Navy Nagar and Nofra area including at BSO furniture yard under jurisdiction of GE(NW) NOFRA complete all as directed by Engg-in-Charge / GE. Treatment to furniture shall be done carefully without disturbing the adjoining parts including tightening, screwing, welding, glueing, nailing,etc wherever applicable.

S&F of 02 Nos cleats of iron angle of size 25mmx25mmx5mm, 50mm long on each long rails and 02 Nos cleats on each short rails duly running welding on appropriate position as directed by Engineer-in-Charge including drilling hole in each cleats duly painted with synthetic enamel paint black colour over a coat of red oxided primer complete all as specified and directed by Engineer in charge. Drawing no FD-220

M&L for removal of old broken/ unsv plywood of charpoy GI pipe and supply & fix new 12 mm thick BWR grade ply of size 1980mmx900mm as per IS-303 approved specification of Make: Archid Ply/ Century Ply/ Green ply on cleats welded on rails provided with nuts & bolts with washer including providing 02 Nos new Flat iron strip of size 900mmx30mmx5mm thick duly welded on two long rails together on appropriate position of charpoy. Flat Iron strip shall be painted with synthetic enamel paint in black colour over a coat of red oxided primer. Corners of plywood top should be rounded off properly before fixing on charpoy complete all as specified and shown on drg and directed by Engineer - in -Charge. Drawing no FD-220

M&L for removal of old broken/ rusted /unsv / partly serviceable long rail from existing frame of charpoy GI pipe and supply and fixing of new long rail 1980mm long made out of GI pipe 32mm nominal bore medium grade ISI marked of Make: TATA/ JINDAL / ZINITH duly threaded on both sides all as specified and shown on drg. Drawing no FD-220

M&L for removal of old broken/ rusted /unsv /partly serviceable short rail from exiting frame of charpoy GI pipe and fixing of short rail 900mm long made out of serviceable part of long rail retrieved from charpoy GI pipe against Ser No. 1.03 above duly cutting, threading on both ends complete all as specified and shown on drawing. Drawing no FD-220

M&L for removal of old broken/ rusted /unsv leg from existing frame of charpoy GI pipe and fixing of legs 440mm long made out of serviceable parts of long rail/Short rail retrieved from charpoy GI pipe against item No. 1.03 & 1.04 here-in-before duly cutting, threading complete all as specified and shown on drawing. Drawing no FD-220

M&L for removal of old broken/unsv GI elbow three way from existing frame of Charpoy GI pipe and supply and fix of new elbow GI three way32mm bore medium grade metal of make Unik / Jupiter metal / Jindal complete ISI marked all specified and shown on drawing. Drawing no FD-220

M&L for removal of broken/ unsv check nuts from existing frame of charpoy GI pipe supply and fixing new check nuts GI 32mm bore medium grade ISI marked Make: Unik/Jupiter/Jindal Metal complete all specified and shown on drawing. Drawing no FD-220

M&L for tightening of charpoy GI frame complete all as per drawing and Preparation of old iron surface of Charpoy GI pipe by scraping/ rubbing and apply spray painting to entire GI frame with 2 coats of synthetic enamel paint of silver shade complete all as specified and directed by Engr-in-chage. Drawing no FD-220

M&L for removal of Unserviceable ply wood from charpoy IP folding with hard top and supply and fixing with new 8 mm thick BWR Grade plywood as per IS-303 approved specification of size 1980mm x 900mm cut in two pieces ( ie two equal pieces shall be of size 990mm x 450mm ) of Make: Archid Ply/ Century Ply/ Green ply with counter sunk nuts and bolts 6mm dia 35mm long , complete all as shown on drg and directed by Engineer-in-Charge. FD-388®

M&L for removal of Unserviceable hard rubber shoe from charpoy IP folding with hard top and supply and fix new one of best quality as approved by Engg-in-charge and all as shown on drg.FD-388®

M&L for preparation of old painted steel surface of the charpoy IP folding with hard top by removing all dents, grinding, rusting and filling with putty and apply spray painting to entire charpoy with 2 coats of black synthetic enamel paint. Metal primer shall be applied wherever required, all as specified and directed by Engr-in-Charge. FD-388®

Charpoy IP hard top FD drawing No FD/MAP-11/01

M&L for removal of Unserviceable ply wood from charpoy IP hard top and supply and fixing with new 12 mm thick BWR Grade plywood as per IS-303 approved specification of size 1930mmx850mm to stiffner with counter sunk nuts and bolts 6mm dia 35mm long , complete all as shown on drg and directed by Engr-in-Charge.

M&L for preparation of old painted steel surface of the charpoy IP hard top by removing all dents,grinding, rusting and filling with putty and apply spray painting to entire charpoy with 2 coats of black synthetic enamel paint. Metal primer shall be applied wherever required, all as specified and directed by Engr-in-Charge.

Unitech Enterprises

SHUBH ASHISH ENTERPRISES

KASTURILAL HARICHAND OHRI AND SONS

GANGAJAL