Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.4 CrAccepted-AOC | ₹1.4 Cr Quoted ₹1.5 Cr | L1 | Accepted-AOC Reasonable rate |
| 2 | L2₹1.5 Cr+₹29,185 (0.19%)Rejected-Finance | ₹1.5 Cr+₹29,185 (0.19%) | L2 | Rejected-Finance Quoted amount higher than L1 |
| 3 | L3₹1.7 Cr+₹14.6 L (9.57%)Rejected-Finance 29 108 A STREET NO 10 VISHWAS NAGAR DELHI 110032 | DELHI | SHAHDARA | DELHI | 110032 | ₹1.7 Cr+₹14.6 L (9.57%) | L3 | Rejected-Finance Quoted amount higher than L1 |
| 4 | Rejected-Technical B 39 UPPER GROUND FATEH NAGAR NEW DELHI 110018 | WEST | DELHI | 110018 | - | - | Rejected-Technical Bidder has requested for withdrawl. Hence not recommended |
| 5 | Rejected-Technical MANEGAON CHAMPANAGAR KHAMARIA JABALPUR 482005 MP | JABALPUR | JABALPUR | MP | 482005 | - | - | Rejected-Technical Physical copy of DD not received. Hence not recommended |
| Sl No | Description | Qty | Unit | RABINDERJIT SINGH AND SONS L2 | A N BUILDERS L3 | Golden Traders L1 |
|---|---|---|---|---|---|---|
| 1.00 | Taking up unserviceable 200mm bore CI water mains (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and as directed.
Note :(i) Earth work will be measured and paid seperately. | 1,320 | RM | 195 ₹2,57,400 | 175 ₹2,31,000 Lowest | 192 ₹2,53,440 |
| 2.00 | Taking up unserviceable 150mm bore CI water mains (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and as directed.
Note :(i) Earth work will be measured and paid seperately. | 2,125 | RM | 135 ₹2,86,875 | 135 ₹2,86,875 | 133 ₹2,82,625 Lowest |
| 3.00 | Supply, laying and jointing of Centrifugally Cast (Spun) Ductile Iron Pressure Pipes with Spigot & Socket end of Dia 200 mm, Class K-9 conforming to IS:8329/2000 suitable for (push-on) rubber gasket jointing with centrifugally applied inside cement mortar lining with Sulphur Resistant Cement and external Metallic Zinc Coating with a finishing layer of Black Bitumen coating on external
surfaces , duly ISI marked and making joints using EDPM/ nitrile rubber gaskets in trenches/under road/surface/ UG etc. complete all as specified and directed.
Note :(i) Earth work and DI fittings will be measured and paid seperately.
(ii) Cast of EPDM gasket shall have deemed to be included in unit quoted rate. | 1,320 | RM | 4,355 ₹57,48,600 | 4,500 ₹59,40,000 | 4,352 ₹57,44,640 Lowest |
| 4.00 | Supply, laying and jointing of Centrifugally Cast (Spun) Ductile Iron Pressure Pipes with Spigot & Socket end of Dia 150 mm, Class K-9 conforming to IS:8329/2000 suitable for (push-on) rubber gasket jointing with centrifugally applied inside cement mortar lining with Sulphur Resistant Cement and external Metallic Zinc Coating with a finishing layer of Black Bitumen coating on external
surfaces , duly ISI marked and making joints using EDPM/ nitrile rubber gaskets in trenches/under road/surface/ UG etc. complete all as specified and directed.
Note :(i) Earth work and DI fittings will be measured and paid seperately.
(ii) Cast of EPDM gasket shall have deemed to be included in unit quoted rate. | 2,125 | RM | 3,215 ₹68,31,875 | 4,000 ₹85,00,000 | 3,210 ₹68,21,250 Lowest |
| 5.00 | Supply and fixing Specials for Spigot and socketed DI pipes as per IS 9523/2000, class K-9, inside cement mortar lining with internal zinc mettalic coating and external black biuminous coating,bends(any type any radius/angle) straight,bend,increasing or decreasing double sockets) Tee pieces single branch, cross(all sockets and spigot collars etc) for upto 300 mm dia of pipes complete all as specified and as directed. | 1,150 | Kg | 385 ₹4,42,750 | 225 ₹2,58,750 Lowest | 385 ₹4,42,750 |
| 6.00 | Material and labour for construction of valve pit of size 0.9 m x 0.9 m x 0.9 m (internal dimension) one brick thick wall, rendering 15 mm thick in CM 1:4 internally & externally (15cm depth below GL) finished even & smooth without using extra cement and applying three coat of white wash, mild steel sheet cover made of mild steel sheet, 3 mm thick and 40 mmx 40 mm x 6mm thick mild steel angle iron frame including locking arrangement,handle etc and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. | 20 | Each Job | 13,015 ₹2,60,300 Lowest | 15,000 ₹3,00,000 | 13,025 ₹2,60,500 |
| 7.00 | S & F Sluice Valve, Cast Iron body, Stainless Steel Spindle, Gun Metal Rings including Wheel for operation, Flanged and Drilled, 200 mm Dia, confirming to IS – 14846, Class PN –1.6, Non Rising Type, Long Body type including all Joints with Rubber Gasket and Jointing Materials, Bolts, Nuts, Washer including taking down existing Sluice Valve of any description complete all as specified and as directed. | 12 | Each | 31,030 ₹3,72,360 | 32,000 ₹3,84,000 | 31,025 ₹3,72,300 Lowest |
| 8.00 | S & F Sluice Valve, Cast Iron body, Stainless Steel Spindle, Gun Metal Rings including Wheel for operation, Flanged and Drilled, 150 mm Dia, confirming to IS – 14846, Class PN –1.6, Non Rising Type, Long Body type including all Joints with Rubber Gasket and Jointing Materials, Bolts, Nuts, Washer including taking down existing Sluice Valve of any description complete all as specified and as directed. | 8 | Each | 24,050 ₹1,92,400 | 21,500 ₹1,72,000 Lowest | 24,030 ₹1,92,240 |
| 9.00 | Material and labour for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed. | 36 | Cum | 6,520 ₹2,34,720 | 8,000 ₹2,88,000 | 6,515 ₹2,34,540 Lowest |
| 10.00 | Material and labour for cutting the existing hard standing/PCC/WBM road at a depth not less than 90cm and 60cm wide for passing of DI pipe returning filling in complete including finishing the surfaces by providing cement concrete (1:2:4) type B2 using 40mm grade stone aggregate) upto 20cm depth,finishing to a uniform smooth surface to match the existing surface complete all as specified and directed.
Note:-Payment for PCC shall deemed to be included in the quoted rate. | 44 | RM | 420 ₹18,480 | 2,250 ₹99,000 | 410 ₹18,040 Lowest |
Tender Value
₹1.4 Cr
EMD Value
₹2.2 L
Closing Date
5 Jun 2025, 6:00 pmClosed
Col Amit Chaubey
HQ 137 Wks Engr PIN 914137 c/o 99 APO
SPL REPAIR /REPLACEMENT OF DISTRIBUTION WATER SUPPLY CI PIPE LINE TO DI PIPE LINE AT ZONE A, C, E, O and Q AREA AT RANGAPAHAR MILITARY STATION
2025_MES_707032_1
8027/E8
Open Tender
Civil Works
Item Rate
180 days
Rangapahar
As per tender documents
6 documents required · 6 mandatory
₹1,000
GE 868 EWS
₹2.2 L
Yes
1 Sept 2025
8 May 2025
12 Jun 2025
8 May 2025
5 Jun 2025
29 May 2025
Amount
Taking up unserviceable 200mm bore CI water mains (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and as directed. Note :(i) Earth work will be measured and paid seperately.
Taking up unserviceable 150mm bore CI water mains (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and as directed. Note :(i) Earth work will be measured and paid seperately.
Supply, laying and jointing of Centrifugally Cast (Spun) Ductile Iron Pressure Pipes with Spigot & Socket end of Dia 200 mm, Class K-9 conforming to IS:8329/2000 suitable for (push-on) rubber gasket jointing with centrifugally applied inside cement mortar lining with Sulphur Resistant Cement and external Metallic Zinc Coating with a finishing layer of Black Bitumen coating on external surfaces , duly ISI marked and making joints using EDPM/ nitrile rubber gaskets in trenches/under road/surface/ UG etc. complete all as specified and directed. Note :(i) Earth work and DI fittings will be measured and paid seperately. (ii) Cast of EPDM gasket shall have deemed to be included in unit quoted rate.
Supply, laying and jointing of Centrifugally Cast (Spun) Ductile Iron Pressure Pipes with Spigot & Socket end of Dia 150 mm, Class K-9 conforming to IS:8329/2000 suitable for (push-on) rubber gasket jointing with centrifugally applied inside cement mortar lining with Sulphur Resistant Cement and external Metallic Zinc Coating with a finishing layer of Black Bitumen coating on external surfaces , duly ISI marked and making joints using EDPM/ nitrile rubber gaskets in trenches/under road/surface/ UG etc. complete all as specified and directed. Note :(i) Earth work and DI fittings will be measured and paid seperately. (ii) Cast of EPDM gasket shall have deemed to be included in unit quoted rate.
Supply and fixing Specials for Spigot and socketed DI pipes as per IS 9523/2000, class K-9, inside cement mortar lining with internal zinc mettalic coating and external black biuminous coating,bends(any type any radius/angle) straight,bend,increasing or decreasing double sockets) Tee pieces single branch, cross(all sockets and spigot collars etc) for upto 300 mm dia of pipes complete all as specified and as directed.
Material and labour for construction of valve pit of size 0.9 m x 0.9 m x 0.9 m (internal dimension) one brick thick wall, rendering 15 mm thick in CM 1:4 internally & externally (15cm depth below GL) finished even & smooth without using extra cement and applying three coat of white wash, mild steel sheet cover made of mild steel sheet, 3 mm thick and 40 mmx 40 mm x 6mm thick mild steel angle iron frame including locking arrangement,handle etc and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
S & F Sluice Valve, Cast Iron body, Stainless Steel Spindle, Gun Metal Rings including Wheel for operation, Flanged and Drilled, 200 mm Dia, confirming to IS – 14846, Class PN –1.6, Non Rising Type, Long Body type including all Joints with Rubber Gasket and Jointing Materials, Bolts, Nuts, Washer including taking down existing Sluice Valve of any description complete all as specified and as directed.
S & F Sluice Valve, Cast Iron body, Stainless Steel Spindle, Gun Metal Rings including Wheel for operation, Flanged and Drilled, 150 mm Dia, confirming to IS – 14846, Class PN –1.6, Non Rising Type, Long Body type including all Joints with Rubber Gasket and Jointing Materials, Bolts, Nuts, Washer including taking down existing Sluice Valve of any description complete all as specified and as directed.
Material and labour for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.
Material and labour for cutting the existing hard standing/PCC/WBM road at a depth not less than 90cm and 60cm wide for passing of DI pipe returning filling in complete including finishing the surfaces by providing cement concrete (1:2:4) type B2 using 40mm grade stone aggregate) upto 20cm depth,finishing to a uniform smooth surface to match the existing surface complete all as specified and directed. Note:-Payment for PCC shall deemed to be included in the quoted rate.
Excavation in trenches not exc 1.5 m in depth and not exc 1.5 m wide for laying CI/GI pipes and getting out in soft/loose soil complete all as specified and as directed.
Returning, filling in, of hard/dense soil including spreading leveling, watering and well ramming in layers not exceeding 25 cm complete all as specified and as directed
Removing excavated soil to a distance n.exc 50M and deposited/ spreaded where directed at a level n. exc 1.5 M above the starting point complete all as specified and as directed.
RABINDERJIT SINGH AND SONS (BID ID -3312599)
A N BUILDERS (BID ID -3313767)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .