Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.8 LAccepted-AOC HOUSE NO 1 11 33 1 NEW ALWAL BOLARUM SECUNDERABAD 500010 | HYDERABAD | TELANGANA | 500010 | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹34.2 L+₹38,034 (1.12%)Rejected-Finance SECUNDERABAD | WARANGAL | TELANGANA | 506350 | L2 | Rejected-Finance Not being L1 | |
| 3 | L3₹34.8 L+₹93,904 (2.77%)Rejected-Finance | L3 | Rejected-Finance Not being L1 | |
| 4 | L4₹36.2 L+₹2.4 L (7.03%)Rejected-Finance | L4 | Rejected-Finance Not being L1 | |
| 5 | L5₹38.2 L+₹4.3 L (12.7%)Rejected-Finance PLOT NO 124 MANI ENCLAVE JJ NAGAR YAPRAL SECUNDERABAD 500 087 | MEDCHAL MALKAJGIRI | TELANGANA | 500087 | L5 | Rejected-Finance Not being L1 |
Tender Value
₹51 L
EMD Value
₹1.0 L
Closing Date
17 Jun 2024, 6:00 pmClosed
CWE NO.2, SECUNDERABAD
CWE NO.2, MUDFORT, SECUNDERABAD- 500003
REPAIRS TO ROADS PATHS CULVERTS AND GATES AT ZONE I AND ZONE II AREA UNDER GE MCEME SECUNDERABAD
2024_MES_656074_1
81218/E8
Open Tender
Civil Works - Roads
Item Rate
180 days
mceme secunderabad
Please refer Tender documents.
9 documents required · 9 mandatory
₹1,000
GE MCEME
₹1.0 L
Yes
18 Sept 2024
27 May 2024
24 Jun 2024
27 May 2024
17 Jun 2024
10 Jun 2024
Amount
Repairs to potholes of depth n.exc 30mm deep and not exc 1sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth making good by applying tack coat @ 5kg/10sqm, putting in premixed bituminous mecadam, well rammed and sealed with binder 9.8 kg per 10sqm, blinded with 0.09cum of stone chippings, 6.3mm size and again well rammed (including supply of premixed macadam, binder and chippings) using paving bitument VG-30 complete all as specified and as directed.
M&L for bituminous premixed semi-dense asphaltic concrete 30 mm consolidated thickness with 5.5% binder content by weight of total mix using paving bitumen VG 30 grade rolled and compacted to requied camber and gradient including preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bag to remove loose dirts etc. and applying evenly a tack coat with bituminous emulsion (RS-1 grade) confirming to IS-8887 at 5Kgs/10 Sqm using emulsion pressure distributor on the prepared bituminous/ granular surfaces complete all as specified and as directed.
M&L for providing 2.5 mm thick road marking painting for strips not exc 100 mm wide (reflective) of specified shade/colour using hot thermoplastic material by fully automatic thermoplastic paint applicator machine, fitted with profile shoe, glass beads dispenser, propane tank heaters and profile shoe, heater, driven by skilled operator on road surface including cost of materials, labour, T&P, cleaning the road surface of all dirt, scales, oil, grease and foreign materials etc, complete as per the direction of Engineer-in-Charge and strictly in accordance to applicable specifications all as specified and as directed.
M&L for cleaning of old chequere/interlocking floor and applying one coat of acrylic weather proof Paint (Apex floor guard and tile guard) on floors etc, complete all as specified and as directed.
Dismantling Stone slabs and tiles laid dry and pointed of any description or thickness in floors, aprons etc all as specified and as directed.
Demolition of cement concrete in ground floors and pavings not exc 15cm thickness (below or above GL) all as specified and as directed.
M&L for 75 mm thick Cement concrete 1:2:4, type B-2 (40mm graded aggregate) all as specified and as directed.
M&L for 50 mm sand filling under floors or in foundations including watering and consolidation spread, rolled and consolidated to gradient and camber required all as specified and as directed.
M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigment all as specified and as directed
M&L for 20mm thick polished Granite slabs (of approved type and approved size ) machine cut, bedded and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete for walls / pillars and etc including rendering / backing coat of 10mm thick in cement mortar 1:3 finished rough to receive wall tiles / slabs including dismantle of old granite slab/ tiles all as specified and as directed.
M&L chequered cement concrete tiles 30cm x 30cm x 25mm thick, set jointed and pointed in neat cement slurry with grey cement and pigments over and including 20mm thick screed or bedding layer of mortar in cement mortar 1:6 for lying floor all as specified and as directed.
M/L for Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) for coping or chamfered on edges all as specified and as directed.
Supply and fix in repairs cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufacturer's instructions, including dismantling of old complete all as specified and as directed.
S&F in repair solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 25mm x 125mm x 25 (Shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd complete as per manufactures instrctions etc. all as specified and as directed.
Supply and fix in repair metal tubular delineator made out of ABS round body fitted with 2 Nos 65mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600mm height duly powder coated and thermo plastic esaltomer 3 bands of green, red and yellow reflector radium tape of 25mm wide stripes with anti theft net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1, complete all as specified and as directed.
M&L for moorum filling for Berms inroad and low level area including watering and consolidation spreading and levelling in layers not exceeding 25cm thick and add well ramming incliding watering as required all as specified and as directed.
M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete all as specified and as directed.
S&F Rolled mild steel in joist, channel angle or tee section, flat iron for gates and truss work fixed independently quality conforming to Fe 410W(Gde-250) including dismantling structural steel work incliding doors, gates, girders etc all as specified and as directed.
M&L for preparation of steel surfaces or iron based material of any description over 10 cm in width or girth applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
SAI RUPA CONSTRUCTIONS
M/S B.SHRAVAN KUMAR
harshraj and co
BNS INFRA AND DESIGN
M/S RADHIKA ENTERPRISES
M/S DIVIJA BUILDERS
M/S C MALLIAH & SONS
K CHANDRAPAL REDDY
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .