Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.7 LAccepted-AOC | L1 | Accepted-AOC Being Lowest L1 | |
| 2 | L2₹39.0 L+₹76,843 (2.01%)Rejected-Finance 1ST FLOOR GURJEET MARKET DHANGU ROAD | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹39.8 L+₹1.6 L (4.10%)Rejected-Finance | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹41.3 L+₹3.1 L (7.97%)Rejected-Finance | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹42.0 L+₹3.7 L (9.79%)Rejected-Finance 2 16 AJEET GANJ II BABUPURWA KANPUR KANPUR NAGAR UTTAR PRADESH 208011 | KANPUR NAGAR | UTTAR PRADESH | 208011 | L5 | Rejected-Finance Other than lowest |
Tender Value
₹43.5 L
EMD Value
₹87,000
Closing Date
27 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Pathankot
GE (AF) Pathankot-145001
ADDN/ALTN TO OFFICERS MESS AND OFFICERS SINGLE LIVING-IN-ACCN AT AIR FORCE STATION PATHANKOT
2023_MES_579644_1
8421/GE/PAF-74/2022-23
Open Tender
Support/Maintenance Service
Item Rate
180 days
GE (AF) Pathankot
As per NIT
8 documents required · 8 mandatory
₹500
GE (AF) Pathankot
₹87,000
Yes
15 Apr 2023
7 Feb 2023
28 Feb 2023
7 Feb 2023
27 Feb 2023
21 Feb 2023
Amount
Cleaning of dust Removal fo all loose existing bituminious material manually and with heat torch gun to get smooth plain finished surface including removing of vegetation/plantation with no loose material on surface. Repair all joints and cracks with Highly elastic Bituminous cold applied putty of Tarplasic having penetration after setting upto 8mm. Levelling of surface to give proper slope will be done as per site requirements with Shalipatch or equivalent make of approved by GE cold applied, Bituminous Mortar & Cold Emulsion cum waterproofing Liquid of make of approved by GE, Created SSD condition on surface with water. Prime the surface with Liquid Membrane Waterproofing Elastomeric Monolithic Acrylic Emulsified water based Bituminous Coating with 200% Elongation make of approved by GE mixed with portable water in the ration of 1 :1 and apply @400gm per Sqm (As per Surface Conditions). (a) Apply first coat of Liquid Membrane Waterproofing Elastomeric Monolithic Acrylic Emulsified water based Bituminous Coating make of approved by GE having elongation 200% conforming to ASTM-C-412 & having crack bridging of 8mm confirming to ASTM-C-836 with tensile strength after 7 days 0.50 mm conforming to ASTM-C-412 with no diluation of water on primed surface while the surface is still tacky with consumption of 700gm per Sqm. Lay Geotex of 45 GSM/ Fibre mesh simultaneously and paste it properly with overlap of 50mm. Allow the first coat to dry for 10 to 12 Hrs. (b) Apply 2nd coat on cured first coat with consumption @ 700gm per Sqm in opposite direction of first coat by Brush or Roller, Allow it to dry for 10-12 hrs after apply 3rd coat with consumption @ 700gm per Sqm. (c) Ensure final curing time of 36 hrs before allowing/ carrying out any further work. Conduct ponding test after min 7 day applying two coats of U V Resistand Elastomeric Exterior Axcrylic Weather resistant water proof coating of make of approved by GE having elongation of 300% after curing of 14 days confirming to ASTM D- 6083-- for U V Protection of Bituminous Elastomeric Acrylic Emulsified Liquid Membranc of make of approved by GE to give long life and prevent its deterioration from sunlight. Note:- (a) The Application of water proofing treatment will be executed by the authorised applicator only after take nacessary approval from GE. (b) Shifting/removing of any wire/cable/AC unit/Water tank of any capacityor other any object as per site requirement an re-fixing the same if needed is deemed to be included in the rate quoted by the contractor.
All as per item No 1 above but in patches, area not exceeding 2.00 sqm complete all as specified and directed by Engr-in-charge.
Material and labour for rendering 15 mm thick in CM 1:4 on roof surfaces or fair faces of brick work or concrete surface finished even and smooth without using extra cement including taking down the existing plaster complete all as specified and directed by Engr-in-charge.
Taking down cement plaster on brick/stone or concrete surfaces including racking out joints, hacking for key, scrubbing down with water to receive plaster complete all as specified and directed by Engr-in-charge.
Material and labour for in two layers (10+5mm) cement plaster in CM 1:4 on bricks or concrete surfaces finishing the surfaces even and smooth without using extra cement complete all as specified and directed by Engr-in-charge. Note : Rate for form work if reqduired to be including in the rate quaoted by the contractor.
Providing and applying first single coat of approved primer and two coats of anti-algal, anti-fungal acrylic weather proof, exterior paint in camouflaging/or any pattern of any shade as specified of an approved make and colour as per manufacturers specification to any surface, upto 12-15m height from gound level and at all locations as directed including preparing new surfaces for painting by mechanical means, scaffolding, cleaning and curing etc complete all as specified and directed by Engr-in-charge.
Preparation of old surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot , moulds moss and efflorosent salts , trading oil and greasy spots and applying two coats of anti-algal, anti-fungal acrylic weather proof, exterior paint any type any shade as approved of any shade/colour in camouflage pattern by mechanical means, scaffolding, cleaning and curing etc complete all as specified and directed by Engr-in-charge.
Rendering 15 mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:6) finished even and fair without using extra cement, complete all as specified and directed by Engr-in-charge.
Preparation of newly plastered surfaces and applying two coats of oil bound distemper, over a coat of primer including chalk whitening on new plastered surfaces of walls complete all as specified and directed by Engr-in-charge.
Complete removing existing treatment using grinding machine/machanical means (as per instructions) on walls including scraping, removing all mud cake with wire bursh and gunny bags from old plastered surfaces and preparation of surfaces by applying minimum 2 mm thickness of altek/birla white putty to obtain smooth/even finish using sand paper and applying two coats of plastic emulsion paint with paint roller, complete all as specified and directed by Engr-in-charge.
Complete removing existing treatment using grinding machine/machanical means (as per instructions) on walls including scraping, removing all mud cake with wire bursh and gunny bags from old plastered surfaces and preparation of surfaces by applying minimum 2 mm thickness of altek/birla white putty to obtain smooth/even finish using sand paper and applying two coats of distemper oil emulsion paint with paint roller over a coat of alkali resistant cement based priming paint complete all as specified and directed by Engr-in-charge.
Removing of vegetation / plantation on the wall/ roof/any position, of up to double storey building including necessary scaffolding upto 6 m height and roots superfacial area n.exc 2 sqm each and making good of surface by applying chemical treatment with GLYPHOSATE 41% including removing /refixing of CI/GI pipe lines complete all as specified and directed by Engr-in-charge. (Note : Brick work, plaster and CI/GI pipe lines shall be measured and paid separately)
Supply and fixing in repair 110 mm dia PVC (SWR) pipes single socketed in any length fixed to wall including clamps as required complete all as specified and directed by Engr-in-charge.
Disconnecting existing Water tanks of capacity exc 250 & n exc 500 Ltr, setting aside (or lowering if required) for repairs, Cleaning etc, and hosting if required reconnecting and refixing in position complete all as specified and directed by Engr-in-charge.
Disconnecting existing Water tanks of capacity exc 500 & n exc 1000 Ltr, setting aside (or lowering if required) for repairs, Cleaning etc, and hosting if required reconnecting and refixing in position complete all as specified and directed by Engr-in-charge.
Dismantling water storage tanks of any description and any type complete all as specified and directed by Engr-in-charge.
Supply and fixing rotational moulded polyethylene anti-microbal, virgin polymer granules with FDA approved phthalate free polymer granules and additives 100% UV stabilized lid multi ribbed design water storage tanks (cylindrical vertical with closed top) of 750 ltrs capacity (multi layer) white in colour including water tank cover (internally/inner locking arrangement for water tank cover) hoisted and fixed in position including tank nipple inlet & coutlet and connecting up pipes including Brass valve ball 20mm dia high pressure with polythene float and fly nut of complete all as specified and directed by Engr-in-charge.
Supply and fixing rotational moulded polyethylene anti-microbal, virgin polymer granules with FDA approved phthalate free polymer granules and additives 100% UV stabilized lid multi ribbed design water storage tanks (cylindrical vertical with closed top) of 500 ltrs capacity (multi layer) white in colour including water tank cover (internally/inner locking arrangement for water tank cover) hoisted and fixed in position including tank nipple inlet & outlet and connecting up pipes including Brass valve ball 20mm dia high pressure with polythene float and fly nut of complete all as specified and directed by Engr-in-charge.
Taking up or down 15 mm steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed by Engr-in-charge.
Supply and fixing in repair 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc complete all as specified and directed by Engr-in-charge.
All as per Srl item No 20 above, but fixing only complete all as specified and directed by Engr-in-charge.
Taking up or down 20 mm steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed by Engr-in-charge.
Supply and fixing in repair 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc complete all as specified and directed by Engr-in-charge.
All as per Srl item No 23 above, but fixing only complete all as specified and directed by Engr-in-charge.
Supply and fixing in repairs Vitreous China wash down water closet pan (pedestel pattern) white, including trap connection to drain (outgoing pipe) and to flushing pipe including plastic seat white in colour cover closed pattern with flat bottom cover including chrome plasted hinges device, complete all as specified and directed by Engr-in-charge.
Supply and fixing, testing and commissioning of white vitreous China rimless wall hung WC of size 380x525x350 with single piece slim concealed cistern of 6/3 litres including floor mounted frame European water closed with CP bolts, nuts, C.I chair (painted with two coats of enamel paint over a coat of primer) or other hanging arrangements with UF soft close seat cover, Bakelite/poly propylene seat & cover with C.P hinges & rubber buffers, C.P. brass screw, washer with all accessories including flush plate of Chrome of size and pattern as approved by GE.
Supply and fixed in repair health faucet, brass, chromium plated, with 1200mm long 8mm dia chrome finish flexible pipe with wall hook, screwed for 15mm bore pipe connection complete all as specified and directed by Engr-in-charge.
Supply and fixing Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including 32mm dia waste pipe and CP grating and bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 355mm x 200mm complete all as specified and directed by Engr-in-charge.
Supply and fixed in repair bid taps, brass, chromium plated, fancy type, with capstan head handle screwed down high pressure, including CP brass wall flanges, screwed for 15mm bore pipe connection (weight not less than 800 grms) complete all as specified and directed by Engr-in-charge.
Supply and fixed in repair bib taps, brass, chromium plated, fancy type, long nose with capstan head handle screwed down high pressure, including CP brass wall flanges, screwed for 15mm bore pipe connection (weight not less than 800 grms) complete all as specified and directed by Engr-in-charge.
Material and labour 100mm/75mm bore cast iron floor trap with CP grating including jointing to waste pipe fixed in cement concrete type B-1, 1:2:4, complete all as specified and directed by Engr-in-charge.
CP Brass grating 100/75mm dia with/without hole as required on site, fixed in repair complete all as specified and directed by Engr-in-charge.
Supply and fixing in repair 10 ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float ovel handle incl brackets and PVC flushing pipe of polyethylene of low or high density or PVC 32mm dia complete all as specified and directed by Engr-in-charge.
Material and labour 16-18mm thick granite (Z black or as approved by GE) work (table rubbed and polished) in steps, jumbs, pillars, window cilles, cooking platforms and like in cement mortat (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including cutting and mirror finish polishing over and including 20mm thick screed bedding/backing layer in CM 1:3 including moulding/rounding of edges and cutting into shape of size as required on site complete all as specified and directed by Engr-in-charge.
All as per srl item No 34 above but as in cills, shelfs risers of skirting complete all as specified and directed by Engr-in-charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-charge.
Non-skid, light colored, white printed ceramic joint free/rectified tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and directed by Engr-in-charge.
Glazed ceramic tile, coloured digital of size 600mm x 300mm in pattern as approved by GE, thickness not less than 7mm as in vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry and pointed with white cement, laid over and including 10mm thick plastering in cement mortar 1:3 complete all as specified and directed by Engr-in-charge.
All as per srl item No 38 above but as in highlighter of any colour/shed/pattern complete all as specified and directed by Engr-in-charge.
Vitrified tiles (light shade) of 10mm thick coloured, double charged (area of each tile exceeding 0.18 Sqm not exceeding 0.38 Sqm ) as in floors jointed in cement slurry and pointed in white or coloured cement to match the existing surfaces over and including 15mm thick screed bedding/backing layer iin cement mortar 1:4 complete all as specified and directed by Engr-in-charge.
All as per Srl item no 40 above but on vertical surface over and including 10mm thick screed bedding/backing layer in cement mortar 1:3 complete all as specified and directed by Engr-in-charge.
Material and labour for formwork to sides and soffits of floor or roof beams, lintels, lintel beams cantilevers, shelves including supports complete all as specified and directed by Engr-in-charge.
Supply and fixing Mild TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-W (Gde E 250) Quality A or Fe-290 (Gde E-165) complete all as specified and directed by Engr-in-charge.
Material and labour RCC type B-1 1:2:4 nominal mix (20 mm graded crushed stone aggregate) as in slab supported on walls, roofs beams complete all as specified and directed by Engr-in-charge.
Providing precast cement concrete in window and door cills , lintel etc set in cement mortar 1:4 complete all as specified and directed by Engr-in-charge.
Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engr-in-charge.
Material and labour Brick work with sub class 'B' bricks straight or curved on plan exc 6 M mean radius in cement mortar 1:6 complete all as specified and directed by Engr-in-charge.
Material and labour Brick work with sub class 'B' bricks straight or curved on plan in any radius in half brick thick walls in cement mortar 1:4 complete all as specified and directed by Engr-in-charge.
Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.5 Square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, wall for taking out hold fast shall be finished identical and make good and povn of cement concrete (1:3:6) type C-0 for fixing hold fast without any extra cost to Govt) complete all as specified and directed by Engr-in-charge.
Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.5 square meter and not exceeding 4.0 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical and make good and Povn of cement concrete (1:3:6) type C-0 for fixing hold fast without any extra cost to Govt.) complete all as specified and directed by Engr-in-charge.
Taking down shutters of any description exc 1 sqm but n.exc 2 sqm complete all as specified and directed by Engr-in-charge.
Taking down and re-fixing door shutter of any description exceeding 1.00 Sqm and not exceeding 2.00mm each in same opening after easing and adjusting and also re-fixing builders hardware as required complete all as specified and directed by Engr-in-charge.
Factory made Steel window/ Ventilator 1.25mm thick box type(primer coated)ERW hollow P section of size 60mmx25mm including grill using 10 sqmm bar double rebated both gauge and glass shutter comprised gauged glazed Skelton shutter ERW sec 50mmx20mm and 1mm thick with two openable leaf consisting two Nos sash bar of T Section 20mmx3mm complete welded to frame with one vertical mullion of ERW box type T Section of size 60mmx25mm and 1.25mm thick refer TD Drawing No CEAF/AR-480/2015 Sheet No 2(A)/4 dated 30.12.2015 including cutting holes and good dismantled portion in PCC(1:2:4) type B-1 and match the disturbed portion with existing surface four Nos for each window including following fitting welded to frame shutter : (a) Hold fast,150mm long of 12mmx3mm made to shape O4 Nos per window (b) handle of Z Sec20mmx25mm, 100mm long-per No leaf (c) MS Tower bolt 150mm long-02No per leaf . (d) Z section 20mmx25mm, 100mm long stopper 1 No per leaf. (e) cleat 55mm long of hollow square 15mmx20mmx63mm welded to hinge. 1 No per leaf (f) MS Pintal hinges of size 75mmx12mm. 2 Nos per leaf, (g) Stainless steel wire cloth, 0.25 mm to 0.36mm nominal dia of wire & average width of aperture 1.40mm to 2mm & fixed with alluminium wire staples (h) Glass pane 3mm thick fixed with MS pin and oil putty (j) Including two coats of synthetic enamel paint complete. NOTE: During Fixing of window, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement complete all as specified and directed by Engr-in-charge.
Supply and fixing factory made solid PVC door frame single rebated of size 60 x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100x8 sheet metal CSK screws taking down with existing one complete all as specified and directed by Engr-in-charge. NOTE:- During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster ,similar wall tile,floor tile etc and as per site requirement.
Factory Made PVC moulded door shutter of wall nut colour, 28 to 30mm thick (stiles), with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face and 2mm plaint colour PVC sheet on back face, with particle board core, fix in frame at site as per specification and drawing complete all as specified and directed by Engr-in-charge.
Supply and fixing pressed steel frame made out of MS sheet 1.25mm thick of size 125x60mm for doors/windows with one or more rebates with and including necessary fixing lugs, stainless steel hinges, lock strike plate etc including filling of concrete 1:3:6 type C-1 back of chowkhats, with two coats of synthetic enamel paint over one coat of red oxide primer,complete all as specified and directed by Engr-in-charge. NOTE:- During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster ,similar wall tile,floor tile etc and as per site requirement .
Supply and fixing pressed steel frame made out of MS sheet 1.25mm thick of size 105x60mm for doors/windows with one or more rebates with and including necessary fixing lugs, stainless steel hinges, lock strike plate etc including filling of concrete 1:3:6 type C-1 back of chowkhats, with two coats of synthetic enamel paint over one coat of red oxide primer,complete all as specified and directed by Engr-in-charge. NOTE:- During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster ,similar wall tile,floor tile etc and as per site requirement .
Supply and fixing 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides to match with & including 6mm thick teak wood edging all around the board ccomplete all as specified and directed by Engr-in-charge.
Supply and fixing 2nd class hard wood 35 mm thick made glazed and skeleton shutters open rebated and prepared to rceieve glass, gauze,etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, size of members of shutters as specified in SSR Part-1, Section 8, clause 8.24 (a) complete all as specified and directed by Engr-in-charge.
Supply and fixing Stainless steel butt hinges medium weight 100mm complete all as specified and directed by Engr-in-charge. NOTE :- All screws shall be self tapping chrome plated and length of screw not less 38 mm
Supply and fixing in repair, 300mm, Mild steel spring for door, ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed by Engr-in-charge.
Supply and fixing stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stailess steel wire staplescomplete all as specified and directed by Engr-in-charge.
Material and labour position suspended false ceiling system using T-grid suspended ceiling grid system. The size of the grid shall be 600 x 600 mm with GI frame work main runner 38 x 24 x 3600 mm, cross tee 25 x 24 x 2540 mm (thickness of material of 0.30mm) using 9mm thick ceiling panel laminated with PVC film on front face and foil back available in due drop texture as per IS-2095, part-I-1996, fixed in the grid of T-grid suspended ceiling grid system duly suspended by 4mm dig GI bar hanger from the purlins of the roof with butter fly clips complete all as specified and directed by Engr-in-charge.
Supply and fixing Joist channel, angle or tee section, GI Tubing , fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e within 20 mm of the length indicated) Fe-410-W (Gde-E-250 quality-A) complete all as specified and directed by Engineer-in-Charge.
Supply and fixing rolled mild steel as in main and cross beams, hips and jack rafters, purlins where connected to commen rafters and running rails fixed with angle cleat or other connecting plates Fe-410-W (Gde-E-250 quality-A) complete all as specified and directed by Engr-in-charge.
Supply and fixing Pre-painted galvanlume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to walls,fixed vwith self tapping screws complete all as specified and directed by Engineer-in-Charge.
Preparation of new or previously untreated surfaces of Steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed by Engr-in-charge.
Preperation of new or previously untreated surfaces of wood or based materials of any description not otherwise described over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-charge.
Preparation of old steel surface exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-charge.
Preparation of old wood based surface and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-charge.
Supply and fixing in repair Vitreous china Urinal, Half stall type of size 34x320x560 white colour (excluding flushing cistern, flush pipe and waste pipe) complete incl providing and fixing plugs, beddding urinal against wall in cement mortar 1:2, securing urinal to plug with and including 60mm long brass screw, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe exclusive of fixing supply pipe to flushing cistern, trap and waste pipe complete all as specified and directed by Engr-in-charge.
Taking down and re-fixing urinal half stall type after tiling work completed including all necessary fitting and fixtures required for re-fixing complete all as specified and directed by Engr-in-charge.
Supply and fixing in repair vitreous china decorative shape table top wash hand basin white of size 495x395x150mm including waste coupling of CP brass full thread of suitable size of wash basin, complete all as specified and directed by Engr-in-charge. Note: Fixing of wash basin on granite/any type of surface with adhesive or any other material deemed to be icluding in the rate quoted by the contractor.
Supply and fixing PVC connection 15mm bore size with two nuts and washers of length 450mm complete all as specified and directed by Engr-in-charge.
Supply and fixing stop valves, brass fancy type 15mm bore, chromium plated exposed Part kit of concealed stop cock with operating liver collor bush and adjustable wall flange with long shank screwed down high pressure with capstan head handle, screwed both ends for iron pipe or for union complete all as specified and directed by Engr-in-charge.
Supply and fixing angle valve, brass, chromium plated, fancy type 15mm bore, with capstan head handle screwed down high pressure, including CP brass wall flanges, screwed for 15mm bore pipe connection fixed in repair complete all as specified and directed by Engr-in-charge.
Supply and fixing centre hole mixer for mixing Hot & Cold water for table top wash hand basin, cast copper alloy, with dual capastan heads,chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts for iron pipe suitable for 15mm bore fixed in repair including 450mm long braided hoses complete all as specified and directed by Engr-in-charge.
Demolition of cement concrete (un-reinforced) in above ground floors and pavings n. exc. 15cm thickness (below or above ground level) complete all as specified and directed by Engr-in-charge.
Material and labour 50 mm thick cement concrete (1:3:6) type C-2, using 40mm graded crushed stone aggregate as in sub base including finishing the surfaces even and fair complete all as specified and directed by Engr-in-charge.
Factory made precast cement concrete coloured interlocking tiles 60 mm thick of size and shape directed strength not less than M-35 concrete laid and jointed in, on and including clean sand bed of 40mm thickness complete all as specified and directed by Engr-in-charge.
Designer coloured, polished floor paver tiles of size 300 x 300mm x 25mm thick with mixture of white cement and pigment set, jointed and pointed in neat cement slurry over and including screed be 20mm thick in cement mortar 1.6 any type and in any pattern (Pattern consist of combination two or more different colour tiles etc.) complete all as specified and directed by Engr-in-charge.
Supply and fixing in repair 50mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenchs or in floor complete all as specified and directed by Engr-in-charge.
Material and labour for fixing of door seal made of aluminium /MS colour coated 40mm wide with nails to cover the gaps between door and floor and similar places complete all as specified and directed by Engr-in-charge.
Supply and fixing Drapery curtain rod of metalic 20mm dia covered with PVC coating complete with MS bracket golden colour rings and side caps fixed in position by drilling holes in walls and fixed the brackets with rawl plug and steel screw complete all as specified and directed by Engr-in-charge.
Material and labour Machine cut kota stone slab (600x600mm) 18-20mm thick as in flooring, over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing including 15mm thick cement screed bed in cement mortor 1:4 and dismantling existing floor complete all as specified and directed by Engr-in-charge.
Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed by Engr-in-charge.
Supply and fixing 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc. complete all as specified and directed by Engr-in-charge.
Supply and fixing Asbestos cement one piece plain angular ridge 6mm thick fixed with coach screws complete complete all as specified and directed by Engr-in-charge.
Cutting chases, pinning in making good to facings in brick walls where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sun shades, shelves, lintels etc and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good cutting not exc 20cm girth, complete all as specified and directed by Engr-in-charge.
Supply and fixing brass CP brass bottle trap of 32mm size with 250mm and 190mm long wall connections pipe for wash basin with inlet and outlet screwed for pipe and connections complete all as specified and directed by Engr-in-charge.
Supply and fixing in repair 32mm dia PVC waste pipe of length 1000mm suitable for fixing in urinal waste coupling, complete all as specified and directed by Engr-in-charge.
Supply and fixing 50mm dia high density polyethylene pipes (HDPE) of pressure rating 6kgf/cm2 sutiable for fixing to outlet of bottle trap including all necessary fitting/fixtures fixed complete to wall complete all as specified and directed by Engr-in-charge.
Supply and fixed toilet paper holder with stainless steel flap of size as approved by GE complete all as specified and directed by Engr-in-charge.
Supply and fixing stainless steel towel ring square of size 8"x8" or as approved by GE complete all as specified and directed by Engr-in-charge.
Supply and fixing soap dispenser with glass bottle of square shape as approved by GE complete all as specified and directed by Engr-in-charge.
Material and labour for brass CP fitting such as extension nipple/socket/bend/elbow of 15mm bore required for fixing of any fittings complete all as specified and directed by Engr-in-charge.
Supply and fixing stone slab of marble 18-20mm thick with table rubbed, edges rounded and polished both side 100x75cm fixed as urinal partitions by cutting a chase of appropriate width with chase cutter and embeddd the stone in the case with eposy grout or with cement concrete 1:2:4 complete all as specified and directed by Engr-in-charge.
Complete removing existing treatment using grinding machine/mechanical means (as per instructions) on ceiling including scraping, removing all mud cake with wire brush and gunny bags from old plastered surfaces and preparation of surfaces by applying minimum 2mm thickness of altek/birla white putty to obtain smooth/even finish using sand paper and applying two coats of distemper oil emulsion over a coat of alkali resistant cement based priming paint complete all as specified and directed by Engr-in-charge.
Material and labour for CPVC pipe of 15mm bore as in connections to concealed slim type wall mounted cistern complete all as specified and directed by Engr-in-charge.
Taking down carefully (aluminum) point wiring complete of any type (batten/surface conduit or concealed) for light/fan/bell/socket/power point complete with all fitting such as switches, sockets, ceiling rose, round block etc complete and making good disturbed surfaces of wall, floor or ceiling with plaster of tiles or roof treatment etc and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as specified and directed by Engr-in-charge.
Material and labour for Point wiring complete with 1100volt grade PVC insulated unsheathed multistranded 1.5 sqmm copper conductor cable confirming to IS 694 FRLS drawn through and including concealed PVC conduit medium grade of size 25/20 mm, etc fixed in wall/ceiling including provision of 1.5 sqmm PVC unsheathed copper conductor and connected to earth dolly, including provision of pressed steel terminal box with 3mm thick modular white cover plate with frame,and metal flush box module wise for top cover as per site requirement of housing switches,sockets etc concealed on wall complete all as specified and directed by Engr-in-charge:- (a) One light/fan point controlled by one switch
(b) One 3 pin switch socket outlet point 5 Amps on independent board.
(c) One 3 pin switch socket outlet point 5 Amps on same board with other switch.
(d) One bell point controlled by one bell switch
All as per item No 105 here in before above but complete with 1100 Volt grade PVC insulated unsheathed multistranded wire with 2.5 sqmm copper cable through and including concealed PVC conduit medium grade of size 25/20 mm, etc fixed in wall/ceiling of suitable size and one run of 2.5 sqmm copper cable of upto earth dolly earthing for 15 Amps socket outlet independent complete all as specified and directed by Engr-in-charge.
Material and labour for Point wiring complete with 1.5 Sqmm single core unsheathed PVC insulated 1100 V, FR grade with multistranded copper conductor ISI marked drawn through and including PVC casing & capping fixed on surface wall/ceiling and including pressed steel turminal box 1.6mm thick grouted in wall and the 3mm thick laminated sheet top cover for mounting of switches, sockets regulators etc including 1.5 Sqmm PVC insulted unsheathed cable multistranded with copper conductor and connecting to earth dolly for light, fan, plug and bell and making good the distributed surfacess completely matched and finished with existing surfacess complete all as specified and directed by Engr-in-charge. (a) One light point/fan point controlled by one switch
(b) One 5 Amps socket point on same board with other switches
(c) One 5 Amps switch socket outlet point on an independent board.
All as per item No 107 above but with 2.5 Sqmm cable for 15 Amp switch socket out let point on independent board including 1.5 Sqmm PVC insulated unsheathed cable multistranded with copper conductor earthing continuity conductor complete all as specified and directed by Engr-in-charge.
Point wiring complete with 1.5 Sqmm single core unsheathed PVC insulated 1100 V, FRLS grade with multistranded copper conductor ISI marked drawn through in existing concealed PVC/Steel conduit and accessories and existing MS pressed steel terminal box and replacement of laminated sheet 3mm thick for mounting of switches, socket regulator etc including 1.5 Sqmm PVC insulated unsheathed cable multistranded copper conductor and connecting to earth dolly for light, Fan, Plug and bell and making good the distributed surfacess completely matched and finished with existing surfacessall as directed and specified by Engr-in-charge. (a) One light point/fan point controlled by one switch
(b) One 5 Amps socket point on same board with other switches
(c) One 5 Amps switch socket outlet point on an independent board.
(d) One light point controlled by two Nos two way switch.
All as per item No 109 above but with 2.5 Sqmm cable for 15 Amp switch socket out let point on independent board including 1.5 Sqmm PVC insulated unsheathed cable multistranded with copper conductor earthing continuity conductor complete all as specified and directed by Engr-in-charge.
Supply and fixing modular switch 1 way 6 Amps 1 module 230 Volts AC complete all as specified and directed by Engr-in-charge.
Supply and fixingmodular socket outlet 6 Amps 2/3 pin combined 2 module 230 Volts AC complete all as specified and directed by Engr-in-charge.
Supply and fixing modular socket outlet 6/16 Amps 2/3 pin combined 2 module 230 Volts AC complete all as specified and directed by Engr-in-charge.
Supply and fixing modular switch 1 way 16 Amps 1 module 230 Volts AC complete all as specified and directed by Engr-in-charge.
Supply and fixing fan regulator 120 Watt -2 Module 230 V, step type complete all as specified and directed by Engr-in-charge.
Supply and fixing modular bell push flush type 10 Amps 1 module 230 Volts AC complete all as specified and directed by Engr-in-charge.
Supply and fixing call bell multimusic type, single pole, 230 volts AC complete all as specified and directed by Engr-in-charge.
Material and labour Switch piano flush type single pole, one way 5 Amps 230 Volts AC circuit complete all as specified and directed by Engr-in-charge.
Material and labour Switch piano flush type single pole, one way 15 Amps 230 Volts AC circuit complete all as specified and directed by Engr-in-charge.
Supply and fixing switch piano flush type,15 Amps, Single pole, two way complete all as specified and directed by Engr-in-charge.
Material and labour for socket outlet 5 Amps, 5 Pin flush type multipurpose, 230 Volts AC circuit complete all as specified and directed by Engr-in-Charge.
Material and labour for socket outlet 2 in 1, 3 Pin 5 & 15 Amps, 230 Volts AC circuit complete all as specified and directed by Engr-in-Charge.
Supply and fixing in replacement electronic fan regulator 230V, stepped, socketed type complete all as specified and directed by Engr-in-charge.
Supply and fixing in replacement Lamp holder, PVC/Polycarbonate type with back plate for batten fitting complete all as specified and directed by Engr-in-charge.
Material and labour for ceiling rose surface bakelite 63.5 x 20 mm, three terminals complete all as specified and directed by Engr-in-charge.
Taking down old and u/s light fittings conventional type from wall surface / ceilling or any position and making good the disturbed surfaces complete all as specified and directed by Engr-in-charge.
Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in-charge.
Supply and fixing LED light fitting with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-charge.
Supply and fixing LED luminaire 600 mm x 600 mm, 40 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by Engr-in-charge.
Supply and fixing round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-charge.
Supply and fixing LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-charge.
Taking down old light fitting and ceiling fan in safe custody cleaning properly and refixing the same at same position complete all as specified and directed by Engr-in-charge.
Supply and fixing 20 watt wall light cool white black 31457-glass CRCA with E 27 lamp 1x20 watt complete fitting with all fixing arrangement complete including taking down with complete all as specified and directed by Engr-in-charge.
Supply and fixing LED street light fitting 45 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed by Engr-in-charge.
Supply and fixing Square Shape Integral decorative LED bollards with IP 65 degree of protection of capacity 9 Watt LED with all accessories complete errect / fixed / mount properly at directed place with reqd fixing/mounting arrangement and connecting/testing complete all as specified and directed by Engr-in-charge.
Supply and fixing post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp all as specified and directed by Engr-in-charge.
Taking down old and u/s aluminium conductor sub main wiring of 2/3 runs or main-wiring or twin core flat cable of any sizes from any position including wood batten, PVC conduit, steel conduit, PVC Casing caping etc all as directed and making good disturbed surface of wall ceiling etc complete all as specified and directed by Engr-in-charge.
Material and labour for concealed sub main wiring using two single core PVC insulated, unseathed stranded copper conductor cable of size 6.0 Sqmm of voltage rarting upto and including 1100 volts drawn in and including PVC conduit of dia not less than 25mm with all fittings and accessories, along with one run of PVC (green colour) insulated, unsheathed, stranded copper conductor of size 4.0 Sqmm (green colour) as earth continuity conductor complete all as specified and directed by Engr-in-charge. (Note : Two runs of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit)
All as per Item No 138 bove but sub main wiring using two single core PVC insulated, concealed conduit suitable size ,unseathed FRLS multi stranded copper conductor cable of size 4.0 Sqmm with one run of PVC (green colour) insulated, unsheathed, FRLS multi stranded copper conductor of size 4 Sqmm as earth continuity conductor complete all as specified and directed by Engr-in-charge. (Note : Two runs of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit)
Material and labour Sub main wiring complete with 4 runs of 4 Sqmm single core PVC insulated unsheathed cable 1100 V,FR grade with multistranded copper conductor ISI marked drawn through PVC rigid conduit and accessories fixed on surface/wall celing etc including provision of 2 run of 4 Sqmm PVC insulated unsheathed cable with multistranded copper conductor as earth continuity complete all as specified and directed by Engr-in-charge. Note : Two runs of copper conducter and one runs of earth copper conducter shall be measured as one length.
All as per Item No 140 above but sub main wiring using two single core PVC insulated,concealed conduit casing & caping suitable size, unseathed FRLS multi stranded copper conductor cable of size 1.5 Sqmm with one run of PVC (green colour) insulated, unsheathed, FRLS multi stranded copper conductor of size 1.0 Sqmm as earth continuity conductor complete all as specified and directed by Engr-in-charge. (Note : Two runs of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit)
Supply and fixing PVC conduit of size 25 mm dia in wall / surface for existing telephone cable / Lan cable complete all as specified and directed by Engr-in-charge.
Material and labour for PVC insulated and PVC sheathed aluminium stranded conductor service cable of size 6.0 sqmm twin core (Flat), fixed properly at directed location and connecting complete all as specified and directed by Engr-in-charge.
Taking down old and u/s MCCB DBs / MCB DB / Main Switches including MCBs/MCCBs/ Isolaters, from wall surfaces complete all as specified and directed by Engr-in-charge. Note : Any disturbed surfaces of wall will be matched properly as the existing colour surfaces.
Supply and fixing factory made epoxy powder coated distribution board double door TP & N 4 ways vertical type MCCB DB, with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management complete all as specified and directed by Engr-in-charge.
Supply and fixing factory made epoxy powder coated distribution board double door TPN 4 ways vertical type MCB DB, with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management complete all as specified and directed by Engr-in-charge.
Supply and fixing factory made epoxy powder coated distribution board SPN 12 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts complete all as specified and directed by Engr-in-charge.
All as per item No. 147 above but DB SPN 8 ways complete all as specified and directed by Engr-in-charge.
All as per item No 147 above but DB SPN 4 ways complete all as specified and directed by Engr-in-charge.
Supply and fixing factory made epoxy powder coated distribution board SPN 2 way without busbar complete all as specified and directed by Engr-in-charge.
Supply and fixing in replacement MCCB,4 pole, 63 Amps , 16 KA current rating conforming to IEC-609472 & IS-139473 to be fixed in distribution board complete all as specified including taking out old one complete all as specified and directed by Engr-in-charge.
Supply and fixing in replacement MCCB, 4 pole, 100 Amps, 16 KA current rating with adjustable thermal and magnetic setting conforming to IEC-609472 & IS-139473 to be fixed in distribution board complete all as specified and directed by Engr-in-charge.
Supply and fixing in replacement MCCB, 4 pole, 125 Amps, 16 KA current rating with adjustable thermal and magnetic setting conforming to IEC-609472 & IS-139473 to be fixed in distribution board complete all as specified and directed by Engr-in-charge.
Supply and fixing MCB single pole 240 volt C curve 10 KA 5 to 32 Amps capacity all as specified and directed incl taking down old one
Supply and fixing MCB single pole & neutral 240 volt 'C' curve 10 KA 40 Amps complete all as specified and directed incl taking down old one.
Supply and fixing MCB TP 415 Volt C curve 10 KA 25 to 63 Amps capacity complete all as specified and directed incl taking down old one.
Supply and fixing MCB TPN 415 Volt C curve 10 KA 40 to 100 Amps capacity complete all as specified and directed incl taking down old one.
Supply and fixing single pole and neutral sheet metal enclosure with a two pin and earth plug and socket (Metal clad) 20 Amps complete with one single pole MCB 20 Amps capacity including taking down old one.
Supply and fixing 63 Amps MCCB bus bar chambers factory febricated suitable for 3 Phase & neutral iron clad with 4 Nos 100 amp rated copper strips including 01 No incomer of MCCB rating 63Amp 4Pole, with two Nos Earthing connection bolt with locking arrangement front door operated complete fixed flush in wall and making good the disturbed wall surfaces complete all as specified and directed by Engr-in-charge.
Supply and fixing in replacement of u/s and broken with new exhaust fan made of sturdy Engineering plastic complete with louvers shutters , 250 mm sweep, single phase, 230 Volts AC,1200 RPM,, ISI marked fixed properly at directed location with provisioning of suitable fixing/tightening arrangements and connecting/testing complete all as specified and directed by Engr-in-charge.
Supply and fixing in replacement of u/s and broken with new exhaust fan made of sturdy Engineering plastic complete with louvers shutters , 300 mm sweep, single phase, 230 Volts AC,1200 RPM,, ISI marked fixed properly at directed location with provisioning of suitable fixing/tightening arrangements and connecting/testing complete all as specified and directed by Engr-in-charge.
Supply and fixing in replacement of u/s and broken with new exhaust fan steel body , 450 mm sweep, with blades and frame and louvers.,single phase, 230 Volts AC, with provisioning of suitable fixing/tightening arrangements and connecting/testing complete all as specified and directed by Engr-in-charge.
Supply and fixing in replacement of u/s and broken with new wall mounted fan 400 mm sweep, single phase, 230 Volts with regulator, oscilation type complete fixed properly on wall and connecting/testing on load complete all as specified and directed by Engr-in-charge. Note : Old u/s fan will be deposited to E/M store yard.
Material and labour for factory made gate light junction box, single phase, 2 wire, 240 volts, weather proof pole mounted made out of 1.63 mm thick MS sheet of size 250x150x100mm depth, with properly insulated aluminium buses - 02 Nos of 32 Amps rated current cap with holes for connecting of cables, hinged door and locking bolt, handle complete all as specified and directed by Engr-in-charge.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. old fan deposited to MES yard complete all as specified and directed by Engr-in-charge.
Material and labour for PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as mass concrete for path to bus bar/ panels complete all as specified and directed by Engr-in-charge.
PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in benching including whethering slightly chamfered angles and finished exposed surfaces even and smooth including necessary form work foundation of bus bars/panels/ two pole structures complete all as specified and directed by Engr-in-charge.
Taking down the defective ceiling fan of any sweep and make after disconnecting electrically & mechanically and transporting to the work shop dismantling, examine & carry out the repairs as required and brought back to site, re-fixing, testing in all respect for smooth running and comprising of the following:- (a) Servicing/overhauling the ceiling fan by thoroughly cleaning the bearing, shaft, stator, rotor & applying the lubricant / grease to the bearing including applying one coat of super enameled varnish over the winding to improve the insulation value complete all as specified and directed by Engr-in-charge.
(b) All as per item No 168 above but re-winding the burnt/short circuited winding with same guage supper enameled copper wire to maintain speed at load.
(c) All as per item No 168 above but applying two coats of synthetic enamel paint after preparation of surface complete all as specified and directed by Engr-in-charge.
Material & labour for earthing complete with galvanised cast iron earth plate electrode of size 600x600x6.3mm thick busied directly in ground less than 3.0m deep below normal ground level as earth electrode with top edge of the earth plate not less than 2.25mtr below ground level using GI wire 4mm dia as earth continuity conductor connected to earth plate by means of welding, GI thimbles, nuts, bolts & washers all as directed including providing earth wire protection pipe GI light grade15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover with handle of angle iron frame of size 40 x 40 x 6mm in PCC 1:3:6 adequate quantity of charcoal dust and salt and kalmi shora all around the earth plate, earth work in any type of soil remaining surplus excavated material all as required at site and specified in EP No 5 of SSR part I 2009 or directed by Engineer-in-charge and incl testing on completion.
Supply, install, connect & testing cubical outdoor type factory made double door , powder coated LT bus bar feeder pillar box for 150 amps 3ph and neutral arrangement of size 500mmx500mmx200mm complete weather proof and verminproof conforming to IP-54 made out of 2mm thick CRCA sheet including provisions for ventilation and cable termination alley all as per IS. It should be mounted on 40 x40 x 6mm angle frame with a clearance of at least 0.45 mtrs above GL and 0.30 mtrs below ground including required PCC for foundation and coping complete all as specified and directed by Engr-in-charge. Note :- Rates for necessary for finding out the loops of connecting cables to old panel and for new panel foundation are deemed to be included in the quoted rates.
Supply and Laying and testing cable XLPE insulated ,screened,LT cable ,PVC bedded,galvanized steel strip or wire armoured,electric power cable (heavy duty ) 1100 Volts grade size 3.5core 150 Sqmm with stranded aluminium conductor, connecting lugs, glands,jointing materials etc., laid on wall, floors, roof, ducts and fixing using clamps, saddle complete all as specified and directed by Engr-in-charge.
All as per item No 171.00 above but size 3.5core 120 Sqmm complete all as specified and directed by Engr-in-charge.
All as per item No 171.00 above but size 3.5 core 70 Sqmm complete all as specified and directed by Engr-in-charge.
All as per item No 171.00 above but size 16 sqmm 2 core complete all as specified and directed by Engr-in-charge.
Excavation in trenches n.exc 1.5m wide and n.exc 1.5m deep and getting out in any type of soil for laying of cable complete all as specified and directed by Engineer-in-charge.
Returning filling in (soil) including spreading levelling, watering and well ramming in layers not exc 25cm thick complete all as specified and directed by Engr-in-charge.
Removal of excavated soil to a distance n.exc 50 m and depositing where directed at a level not exc 1.5 mtr above the ground level/starting point complete all as specified and directed by Engr-in-charge.
Sand cushioning to under ground cable 8 cm thick layer below the cable and 15cm thick above the cable complete all as specified and directed by Engr-in-Charge.
Material and labour Sub Class 'B' brick covering protection to the eletric cable laid dry flat transversally along the length of cable on sand cushioning with width equal to length of brick complete all as specified and directed by Engr-in-charge.
Material and labour for cutting of bituminous road / floor for laying of pipe / cables not exceeding 1.5 meter wide and not exceeding 1.5 meter deep including refilling / with material and , watering well ramming / compacting and making good with PCC 1:2:4, type B-1, 100 mm thick complete all as specified and directed by Engr-in-Charge.
Supply and fixing pressure die-cast aluminium IP 65 cool white road way luminaire with LED as Light source with rating not less than 72 Watt including with suitable GI Pipe Bracket , double clamps complete with nut bolts with pole and 2.5 sqmm 3 core copper wire multistrand for connection complete all as specified and directed by Engr-in-charge.
Material & labour for tubing GI medium grade 40mm bore for cable protection laid in ducts, fixed to road crossing / on wall / on pole for cable protection including fixing arrangement all as specified and directed by the Engr-in-charge.
All as Per item No 182 above but size of 50 mm complete all as specified and directed by Engr-in-charge.
All as Per item No 182 above but size of 80 mm complete all as specified and directed by Engr-in-charge.
Earthing complete with galvanised steel earth plate electrode 600x600x6mm burried directly in ground not less than 2.25 mtr deep below normal ground level with top edge of earth plate not less than 1.5mtr below normal ground level connected to the Galvanised iron strip 32x6mm size by means of bolts ,nuts,check nuts and washers of galvanised iron and 32x6mm GI strip procted by provision of GI light grade pipe 40 mm bore incl provision of concrete pit in PCC1:2:4 type B-i , using 20 mm graded stone aggregates with 40 mm thick cover of RCC (1:2:4) reinforced with XPM weight not less than 4 Kg /Sqm and 6mm dia bar handle ,excavation and earth work in any type of soil ,charcoal dust and salt light grade GI watering pipe 20 mm bore with funnel and wire mashand medium grade GI protection pipe 15mm bore 5 Mtr long and GI strip upto main earthing of pole complete all as shown in electrical plate No 5 of MES Sch 191 Part-I all as specified and directed . On testing after completion if the desired resistenance is not obtained the contrator shall redo the earthing without any extra cost to the department .
Supply and fixing GI earth strip of size 32 x 6mm fixed on wall with insulators and laid in trench complete all as specified and directed by Engr-in-charge.
Vijay Kumar Contractor and Engineers
A R ENTERPRISES
JAGDISH SINGH ASSOCIATES
KUMAR TRADING CO
PARVINDER BHARDWAJ
M/S SINGH AND ASSOCIATES
D R CONTRACTORS
pardeep singh marwaha
Hans Raj Pooni
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .