Labour Works contract for Exg.11KV Sanakuppam Rural feeder fed from 33/11KV Kolathur SS into Agri to Non-agri.feeder segregation under RDSS scheme in respect of Pallipet Section in Tiruttani division Under E Tender system.

Transportation of all types and sizes of poles and other associated materials from Road side to pole pit and vice versa upto 0.50 KM

Transportation of all type of poles by bullock cart or other vehicle (for all sizes of poles including loading and unloading) For a lead upto 5 KM

Transportation of all type of poles by bullock cart or other vehicle (for all sizes of poles including loading and unloading) Above 5 KM and upto 15 kms

Excavation of Pole pit of size 2'x2'x1/6 of the height of the pole upto 8.0 mtr pole by using JCB or Manual

Erection of RCC, REC, PSC poles upto 8.00m length by using JCB / Manual

Excavation of Pole pit 9.0Mtr

Erection of RCC, REC, PSC poles above 8.00m length by using Crane / Manual

Concreting with 1:4:8 mix using 40 mm Jelly including curing(Material + labour) Sleeve concreting

Concreting with 1:4:8 mix using 40 mm Jelly including curing(Material + labour) Stay concreting

Earthing of poles with GI wires 4 or 6 SWG by coil earthing

Transporting of conductors of all sizes from road side to pit locations upto one KM of Conductor

Loading of conductor in drum

Unloading of conductor in drum

Loading of line materials

Unloading of line materials

Transporting of Distribution Transformer / Line materials from stores to office / site upto 10 KM distance by engaging 1 Ton capacity Minidor (Lorry)

Transporting of Distribution Transformer / Line materials from stores to office / site above 10 KM and upto 15 kms distance by engaging 1 Ton capacity Minidor (Lorry)

Fixing of HT "V" cross arms ( 3-1/2')

Fixing of Tapping Channel cross arms

Fixing of HT / LT Ti fitting

Fixing of 11 KV Pin Insulators with Pin

Fixing of 11 KV strain Disc with M/P

Excavation of Stay pit of 4.5 ' to 5 ' depth using JCB / Manual

Erection of stay set complete with fixing up stay wire Eye, Bow, Guy Shackle, Binding etc.

Paving and stringing of conductors of 7/3.35 mm ACSR or other equivalent conductor

Paving and stringing of conductors of 7/4.09 mm ACSR or other equivalent conductor

Dismantling of Pole 7.5 mtr

Dismantling of Pole 8.0 mtr

Dismantling of Tapping channel cross arm

Dismantling of V cross arm

Dismantling of 11KV Pin insulator with pin

Dismantling of 11KV Disc

Dismantling of TI Fitting

Dismantling of ACSR 7/4.09 mm conductor

Dismantling of AAAC 7/3.15 mm conductor

Concreting with 1:4:8 mix using 40 mm Jelly including curing(Material + labour) Sleeve concreting

Concreting with 1:4:8 mix using 40 mm Jelly including curing(Material + labour) Stay concreting

Transportation of all types and sizes of poles and other associated materials from Road side to pole pit and vice versa upto 0.50 KM

Transportation of all type of poles by bullock cart or other vehicle (for all sizes of poles including loading and unloading) For a lead upto 5 KM

Transportation of all type of poles by bullock cart or other vehicle (for all sizes of poles including loading and unloading) Above 5 KM of lead upto 15 KM

Transporting of conductors of all sizes from road side to pit locations upto one KM of Conductor

Transporting of Distribution Transformer / Line materials from stores to office / site upto 10 KM distance by engaging 1 Ton capacity Minidor (Lorry)

Transporting of Distribution Transformer / Line materials from stores to office / site above 10 KM and upto 15 kms distance by engaging 1 Ton capacity Minidor (Lorry)

Loading of conductor in drum

Unloading of conductor in drum

Fixing of LT 3 Phase X arm

Fixing of Aluminimu Knob

Fixing of LT Pin Insulator with Pin

Fixing of LT Shackle with Strap Set

Paving and stringing of conductors of sizes upto 7/2.59 mm ACSR or other equivalent conductor

Excavation of Stay pit of 4.5 ' to 5 ' depth using JCB / Manual

Erection of stay set complete with fixing up stay wire Eye, Bow, Guy Shackle, Binding etc.

Excavation of Pole pit of size 2'x2'x1/6 of the height of the pole upto 8.0 mtr pole by using JCB or Manual

Erection of RCC, REC, PSC poles upto 8.00m length by using JCB / Manual

Loading of line materials

Unloading of line materials

Earthing of poles with GI wires 4 or 6 SWG by coil earthing

Erection of 11 KV single pole transformer structure complete with out centre support

Loading of DTs & Erection of DT's

Transportation of all type of poles by bullock cart or other vehicle (for all sizes of poles including loading and unloading) For a lead upto 5 KM

Transportation of all type of poles by bullock cart or other vehicle (for all sizes of poles including loading and unloading) Above 5 KM of lead of upto 15 KM

Erection of 11 KV single pole transformer structure complete with out centre support

Loading of DTs & Erection of DT's

Transportation of all type of poles by bullock cart or other vehicle (for all sizes of poles including loading and unloading) For a lead upto 5 KM

Transportation of all type of poles by bullock cart or other vehicle (for all sizes of poles including loading and unloading) Above 5 KM of lead of upto 15 KM

Erection of 11 KV single pole transformer structure complete with centre support

Loading of DTs & Erection of DT's

Transportation of all type of poles by bullock cart or other vehicle (for all sizes of poles including loading and unloading) For a lead upto 5 KM

Transportation of all type of poles by bullock cart or other vehicle (for all sizes of poles including loading and unloading) Above 5 KM of lead of upto 15 KM

Erection of DP structure with stay as per TNEB standard including fixing of top channel, cross bracing, concreting, painting, colour washing etc.,With 11 KV AB switch using all types of poles of size 9.14 m and above length

Transportation of all types and sizes of poles and other associated materials from Road side to pole pit and vice versa upto 0.50 KM

Transportation of all type of poles by bullock cart or other vehicle (for all sizes of poles including loading and unloading) For a lead upto 5 KM

Transportation of all type of poles by bullock cart or other vehicle (for all sizes of poles including loading and unloading) Above 5 KM and upto 15 kms

Numbering of poles by using Enamel paint including cost of paint and painting charges (Numbering in black letters with yellow base by using stencils/ skilled painters. The height of lettering shall be 40 mm for numbers and 50 mm for alphabets.