Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
Tender Value
₹92.8 L
EMD Value
₹1.9 L
Closing Date
21 Dec 2022, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
HEAD PRPD
Civil Section Building No 2 PRPD Ph No 044 27480500 Extn 47660 47867 27480270
Finishing works of bldg and road laying around Shaker Facility at PRP site Kalpakkam
2022_BARC_727786_1
PRPD/NF/567/MW/K - 2777/2022
Open Tender
Civil Works
Item Rate
120 days
kalapakkam
Please refer Tender documents.
6 documents required · 6 mandatory
₹0
₹1.9 L
27 Jan 2023
7 Dec 2022
23 Dec 2022
8 Dec 2022
21 Dec 2022
15 Dec 2022
8 Dec 2022 - 15 Dec 2022
Amount
All kinds of soil with depth exceeding 1.50 m but not exceeding 3m below from original average ground level and disposing surplus excavated earth upto a lead of 200 meters complete all as per specifications and as directed by Engineer-in-charge .
Conveying the surplus excavated earth debris , boulders and spoil by mechanical means and depositing at identified placesas dumping yard as per requirement with a lead for 1st 1 kilometer or part thereof including loading ,unloading, breaking clods , levelling all complete as per specification and as directed by the Engineer - in- Charge. 1) The rates in respect of this Item are applicable for the NET quantities arrived at after making deductions for the voids @20 % in respect of soil and @50% in respect of Rock from the corresponding Stack/ truck measurements.2) The earth shall be dumped well inside the dumping yard and not over approach pathway road complete all as per drawings, specifications and as directed by the Engineer-in-Charge.
Providing and laying Cement Concrete 1:3:6 using 20mm and downgraded size hard granite broken stone in foundations, trenches etc. including necessary form work, ramming, compaction, leveling, mechanical mixing, curing, dewatering, if any, complete all as per drawing , specification and directed by Engineer in charge.
Providing and Casting in situ Reinforced Cement Concrete M35 grade at all heights ( Upto 14mtr) using machine crushed hard broken granite stone of maximum size 20mm, curing , mechanical mixing, transporting, placing of lifts vibrating, consolidation etc., as directed by Engineer in Charge. Note: minimum cement content is 380kg/Cum.
Supplying, placing in position and removing Formwork for all insitu concrete works including sloped roof and arches etc., as per drawings and specifications, all centering, scaffolding complete and as directed by Engineer -In-Charge. (Measurement for the formwork shall be the area of forms in contact with concrete surfaces).
Providing ,Cutting ,bending placing ,binding steel reinforcement in all reinforced concrete works Fe 500D make TATA , VIZAG, TMT bars including cost of spacer blocks,CM1:2 and binding wire complete as per drawing and specifications complete all as per drawings, specifications and as directed by the Engineer-in-Charge.
Providing, Supplying, cutting, bending to shape, welding, fabricating, hoisting, placing and fixing in position Structural steel members like trusses, purlins, staircase handrails, ladders etc. using MS hollow / circular / square / rectangular tubular sections including chamfering and rounding off the edges, scaffolding and staging required for fabrication as well as erection complete all as per specifications, drawings and as directed by the Engineer-in-charge. Note : Lifting device arrangements if any required also arranged by the contractor at his own cost.
Providing, Supplying, cutting, bending to shape, welding, fabricating, hoisting, placing and fixing in position Structural steel members like trusses, purlins, staircase handrails, ladders etc. using MS hollow / circular / square / rectangular tubular sections including chamfering and rounding off the edges, applying G.I.coating 100 microns and above by hot dipping , scaffolding and staging required for fabrication as well as erection complete all as per specifications, drawings and as directed by the Engineer-in-charge. Note : Lifting device arrangements if any required also arranged by the contractor at his own cost.
Providing and laying 230mm brick work with well burnt stock bricks/ fly ash bricks in cement mortar 1:5 at all levels inclusive of tools, scaffolding ,raking out joints, curing etc. as per specification and direction of Engineer -in- charge.
Providing and constructing 110mm thick (plus or minus 5mm) brick work in Cement Mortar 1:4 for partition walls at all levels using well burnt stock bricks/fly ash bricks including supplying and providing 2 nos. of 8mm MS rod at every fourth layer, scaffolding, curing complete all as per specifications and direction of Engineer -in- charge. Note: The contractor shall make his own arrangements for supply of 8 mm MS rods of required quantity from authorised dealers and use it on works.
Providing and constructing Random rubble masonry in cement mortar 1:6 using hard granite stones obtained from approved quarry with bond stones at 2.00 meters apart for foundation, basement and in superstructures, compound/boundary walls, including size of stones at all levels inclusive of tools, scaffolding ,raking out joints, curing etc. as per specification and direction of Engineer -in- charge.
Providing and Plastering with Cement Mortar 1:4; 12mm thick for RCC/brickwork for internal/ External faces, finished smooth with a floating coat of neat cement including scaffolding, curing and forming grooves wherever necessary all complete as per specification and as directed by Engineer -In-Charge.
Providing and fixing homogeneous PVC SHEET, 2 mm thick conforming IS-3462 latest edition flooring & skirting (Poly floor or approved equivalent make) in approved pattern colour and shade on a smooth and damp proof base using rubber based adhisive of approved quality & manuyfacturer like Dunlop-S-758, or Fevicol SR-998, or approved equivalent including with all tools, tackles, materials, manpowers, equipments, machinery etc., cleaning & preparation of surface, levelling small undulations with plaster of paris if required, rooling with light wooden roller weighing about 5Kg complete all, as per drawings, specifications and as directed by the Engineer-in-Charge.
Providing and laying Premium Quality (I Class) Ceramic tiles of `KAJARIA/ SPARTEK/ ORIENT' or other approved equivalent make, size and colour in flooring and dado, set in Cement Mortar 1:3; 20mm thick including pointing the joints with matching colored cement, curing finishing complete all as per drawings, specifications and as directed by the Engineer-in-Charge. Using colour ANTI-SKID CERAMIC FLOOR TILES of size as required at site and laid on 20mm thick C.M 1:4 as directed conforming to IS-13755 - Latest edition FOR FLOORING.
Using colour JOINT FREE CERAMIC TILES of size 300x 450 /600 as required at site and as directed by EIC, conforming to IS-13753 - Latest edition FOR DADOO.
Providing and layinhg with very good quality Designer tiles of make "Eurocon" / "Ultra" or other approved equivalent make of pre-polished cement concrete tiles for Flooring/cladding conforming to IS Specifications of approved size, shape and colour in CM 1:1 over brickwork/concrete surfaces over a base coat of 20mm thick CM 1:3, including filling the joints with the matching colour paste (white cement plus colour pigments), simultaneous sunk pointing at all levels, scaffolding, curing, finishing (washing the floor with soap solution) etc., all complete as per specifications and as directed by the Engineer.
Providing,making and fixing of Teak wood (II nd class) door frame(100 x75/125x50mm)/ shutter frame (200/150 mm x 32mm thick) in wall including S.S fastener nuts & bolts screwsetc.,the rateincludes with two coats of synthetic enamel over a one coat of primer etc., complete all as per drawings, specifications and as directed by the Engineer-in-Charge.
Providing & fixing single/double leaf of the following sizes solid hardwood block board core, factory made Single/double door 30mm thick Flush door shutters, with 1mm thick sunmica pasted on both sides of door as required pattern, with internal teakwood lipping (Internal lipping shall have a total depth of not less than 25mm) using second class teak wood on all four sides, phenol bonded, hot pressed, conforming to IS:2202 latest edition, of various sizes with necessary test certificate etc.,complete all as per drawings, specifications and as directed by the Engineer-in-Charge. (Note: i. The width of the frame including lipping shall not be less than 45mm and not more than 75mm. ii. overall thickness of shutter is 32mm .)
Providing and fixing IS:12817 market Stainless steel butt hinges of size 125 x 64 x 2.5mm (heavy weight) "GARG" or equivalent approved make with suitable stainless steel screws etc. complete all as per specification and as directed by Engineer-in-charge.
Providing and fixing Stainless steel tower bolts of size 300 x 12mm "GARG" or equivalent approved make with necessary SS screws etc. all as per specification and as directed by the Engineer-in-charge.
Providing and fixing Stainless steel tower bolts of size 200 x 12mm "GARG" or equivalent approved make with necessary SS screws etc. all as per specification and as directed by the Engineer-in-charge.
Providing and fixing Stainless steel "C" type door handles 10mm dia SS 304 garde solid rod, 200mm long in steel door/wooden door including SS screws/ bolts etc. all as per drawing and specifications complete. Sample to be approved by the Engineer-in-charge.
Providing and fixing Stainless steel aldrop of size 250mm long "GARG" or equivalent approved make with necessary SS screws etc. all as per specification and as directed by the Engineer-in-charge.
Providing and fixing Alu. hanging Heavy Quality floor door stopper ISI Marked with twin rubber stopper anodised ( Anodic coating not less than Grade AC10 as per IS:1868) transparent or dyed to req. colour or shade with necessary screws etc. complete all asper specification and as directed by the Engineer-in-Charge. . Sample to be approved by the Engineer-in-Charge.
Providing and Fixing IS:3564 marked AI die cast body tubular type Universal Hydraulic door closer with necessary accessoried and screws etc. in wooden doors/steel doors with necessary bolts & nuts "Everite/Hardwyn" or apporved equivalent make complete as per specification and as directed by the Engineer in charge.
Providing and fixing anodized Aluminium (Anodised transparent or dyed to required shade according to IS:1868 Minimum Anodic coating of grade AC 15) work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make confirming to IS:733 and IS:1285 fixed with raw plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless screws,including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required. ( Glazing and panelling shall be paid for separately) complete all as per architectural drawings and directions of Engineer-in-Charge. Note: 1) The rates for aluminium is inclusive of all fasteners required for fabrication and fixing in the walls. 2) All joints shall be of mittered joints. 3) A long M.S. rod threaded at both ends to be provided in all aluminium door shutter in top & bottom horizontal members internally connecting vertical members and fixed with M.S. washers & nuts. 4) Only Aluminium members alone shall be measured and paid for. Note: 1) The rates for aluminium is inclusive of all fasteners required for fabrication and fixing in the walls. 2) All joints shall be of mittered joints. 3) A long M.S. rod threaded at both ends to be provided in all aluminium door shutter in top & bottom horizontal members internally connecting vertical members and fixed with M.S. washers & nuts. 4) Only Aluminium members alone shall be measured and paid for.
Providing and fixing stailess steel handles tubular type 450mm long 30mm dia for aluminium doors etc, complete all as per specifications and as directed by the Engineer in charge.
Providing and fixing in position 5.0 mm thick tinted colour Float glass pane in aluminium doors, window, vantilator shutters of approved quality (SAINT GOBIN) including EPDM rubber / neoprene gasket / glass putty,mastic, etc complete all as per specifications and as directed by the Engineer in charge.
Providing and fixing in position 6.0 mm thick toughned and tinted colour Float glass pane in aluminium doors, window, vantilator shutters of approved quality (SAINT GOBIN) including EPDM rubber / neoprene gasket / glass putty,mastic, etc complete all as per specifications and as directed by the Engineer in charge.
Providing and fixing the 20mm nominal size ( CPVC) pipes thickness 2.0 to 2.50mm Chlorinated Poly Vinyl Chloride ( CPVC) pipes FlowGuard/Jain/Kissan or other approved equivalent make having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings (cost of all types of specials such as tees, reduces, coupler, reducing bushes,threaded adaptor, elbow, tail pieces, caps etc.,) including jointing of pipes & fittings with one step CPVC solvent cement, wall chasing , fixing the pipe with clamps at 1.00 m spacing and testing the line as directed by the Engineer in charge.
Providing and fixing the 25mm nominal size ( CPVC) pipes thickness 2.6 to 3.10mm Chlorinated Poly Vinyl Chloride ( CPVC) pipes FlowGuard/Jain/Kissan or other approved equivalent make having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings (cost of all types of specials such as tees, reduces, coupler, reducing bushes,threaded adaptor, elbow, tail pieces, caps etc.,) including jointing of pipes & fittings with one step CPVC solvent cement, wall chasing , fixing the pipe with clamps at 1.00 m spacing and testing the line as directed by the Engineer in charge.
Providing and fixing the 32mm nominal size ( CPVC) pipes thickness 3.2 to 3.7mm Chlorinated Poly Vinyl Chloride ( CPVC) pipes FlowGuard/Jain/Kissan or other approved equivalent make having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings (cost of all types of specials such as tees, reduces, coupler, reducing bushes,threaded adaptor, elbow, tail pieces, caps etc.,) including jointing of pipes & fittings with one step CPVC solvent cement, fixing the pipe with clamps at 1.00 m spacing and testing the line as directed by the Engineer in charge.
Providing and fixing the 40mm nominal size ( CPVC) pipes thickness 3.8 to 4.3mm Chlorinated Poly Vinyl Chloride ( CPVC) pipes FlowGuard/Jain/Kissan or other approved equivalent make having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings (cost of all types of specials such as tees, reduces, coupler, reducing bushes,threaded adaptor, elbow, tail pieces, caps etc.,) including jointing of pipes & fittings with one step CPVC solvent cement, fixing the pipe with clamps at 1.00 m spacing and testing the line as directed by the Engineer in charge.
Providing and fixing the 50 mm nominal size ( CPVC) pipes thickness 4.9 to 5.5 mm Chlorinated Poly Vinyl Chloride ( CPVC) pipes FlowGuard/Jain/Kissan or other approved equivalent make having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings (cost of all types of specials such as tees, reduces, coupler, reducing bushes,threaded adaptor, elbow, tail pieces, caps etc.,) including jointing of pipes & fittings with one step CPVC solvent cement, fixing the pipe with clamps at 1.00 m spacing and testing the line as directed by the Engineer in charge.
Providing and fixing PVC Nahni trap of FINOLEX/PRINCE or other approved equivalent make conforming to the relevant IS code, heavy quality of self cleaning design with 75mm internal dia and outlet 125mm dia. PVC grating with perforated holes on top, including embedding in cement concrete 1:2:4, forming circular holes by providing and fixing 110mm OD PVC pipes of required height upto floor level, levelling and rendering smooth, making good the floor and wall etc. complete as per specifications. (Rate shall include cost of PVC pipe and it shall not be paid extra).
Providing laying and fixing 76mm OD PVC pipes and specials. with PVC pipe clips or laid embedded under floor slab and fixed to walls wherever required FINOLEX/PRINCE or other approved equivalent make of UPVC stabilised - SWR PVC pipes - Type B (Suitable for soil and waste discharge system having wall thickness of minimum 3.2 to maximum 3.8mm) conforming to IS - 13592 - Latest edition and PVC pasting type specials such as door bends, door tees and cowls etc. heavy quality for soil waste or vent or antisyphonage PVC pipe with necessary PVC clips and joints.
Providing laying and fixing 110mm OD PVC pipes and specials with PVC pipe clips or laid embedded under floor slab and fixed to walls wherever required FINOLEX/PRINCE or other approved equivalent make of UPVC stabilised - SWR PVC pipes - Type B (Suitable for soil and waste discharge system having wall thickness of minimum 3.2 to maximum 3.8mm) conforming to IS - 13592 - Latest edition and PVC pasting type specials such as door bends, door tees and cowls etc. heavy quality for soil waste or vent or antisyphonage PVC pipe with necessary PVC clips and joints.
Providing laying and fixing 160mm OD PVC pipe and specials with PVC pipe clips or laid embedded under floor slab and fixed to walls wherever required FINOLEX/PRINCE or other approved equivalent make of UPVC stabilised - SWR PVC pipes - Type B (Suitable for soil and waste discharge system having wall thickness of minimum 3.2 to maximum 3.8mm) conforming to IS - 13592 - Latest edition and PVC pasting type specials such as door bends, door tees and cowls etc. heavy quality for soil waste or vent or antisyphonage PVC pipe with necessary PVC clips and joints
Providing and fixing in position White glazed vitreous chinaware European type water closet of `PARRYWARE' Stanza model closet C8979 (685x370x735) rimless White colour make or approved equivalent comprising of: i) White Glazed vitreous chinaware Wash Down Closet with `P' or `S' trap with or without vent and including flushing cistern etc., complete all. ii) White Solid Anti-microbial seat cover of make "Parryware" make or other approved equivalent make including fixing. iii) 450mm long ss braided hose connection "Parryware" make T754099 or other approved make. iv) One no. of heavy quality 15mm C.P.brass ANGLE STOP COCK PARRYWARE Agate G0607A1 make and suitable wall flange. v) SLIMLINE HEALTH FAUCET T9940A1 comprising 1m length of metal hosepipe. , vi) 1 no. of heavy quality 15mm C.P.brass TWO WAY BIB COCK PARRYWARE Agate G0634A1.1no. Of CP bracket, make fixing the same, fixing the bracket to wall dado by using non-corrosive screw nail with teak wood plugs, testing etc., complete as per specification and as directed by Engineer -In-Charge.
Providing and fixing in position White glazed vitreous chinaware Indian type water closet IWC 530X415mm of 'PARRYWARE ' make, model C01161C white colour or approved equivalent Wash Down Closet with `P' or `S' trap with or without vent. comprising of: i) 10 liters capacity Low level flushing cistern `SLIMLINE' E8333 Economy Single Flush (White Colour)or PARRYWARE make with high impact polystyrene body with DELRIN valve and fittings, iii) heavy quality 15mm C.P.brass ANGLE STOP COCK PARRYWARE Agate G0607A1 make and suitable wall flange complete all as per specifications and as directed by Engineer -In-Charge. iv) 450mm long ss braided hose connection "Parryware" make T754099 or other approved make.
Providing and fixing in position of vitreous chinaware ROCA CHIC URINAL 325X558 (TOP INLET) white colour RS35945L460 with outlet comprising of : (i) Urinal Valve Auto Closing System with pipe make 'Parryware" G2007A1 or other approved equivalent make. (ii)32mm heavy quality C.P.Brass Bottle trap of make "Parryware" T3203A1, 12" or other approved equivalent make with self cleaning design,.complete all as per specifications and as directed by Engineer -In-Charge.
Providing and fixing Granite stone slab table rubbed, edges rounded and polished of size 750x500mm deep and 18mm thick fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4( 1 cement : 2 Coarse sand : 4 Graded aggregate 6mm nominal size) all complete as per drawings and specifications as directed by Engineer -In-Charge.
Providing and fixing heavy quality 15mm C.P. Brass BIB COCK PARRYWARE Agate G0604A1 make and suitable SS valve/cup complete all as per specifications and as directed by Engineer -In-Charge.
Providing and fixing heavy quality 20mm C.P.Brass screw down CONCEALED TYPE STOP COCK 'PARRYWARE' Agate G0651A1 &G5053A1 (concealed body CSC & Upper trim CSC) make and suitable SS valve/cup. complete all as per specifications and as directed by Engineer -In-Charge.
Providing and fixing in position best vitreous China Wash Basin comprising of: i) Colour glazed vitreous china ware wash hand basin of size 580 x 450mm with Pedestral of ' PARRYWARE ' Cardiff range PP code :C0480/81 & C0375 make or other approved equivalent make with a pair of suitable cast iron brackets/ bolts painted, ii) ' PARRYWARE ' make heavy quality C.P. Pop up Brass waste coupling with , washer, check nuts etc., required for fixing. iii)15mm heavy quality C.P. Brass Pillar cock ' PARRYWARE ' Zen Code G1702A1 / PLUMBER CRS -1101 make. iv) 32mm heavy quality C.P.Brass `P' trap PLUMBER or equivalent make with self cleaning design. v) including waste pipe 40mm dia G.I. pipe medium class with fittings (approx mate length 90cm). vi) 450mm long ss braided hose "PLUMBER" make or other approved make. vii) heavy quality 15mm C.P.brass ANGLE STOP COCK without pipe `PARRYWARE' Zen G1707A1 /PLAMBER CRS -2105 make and suitable SS wall flange complete all as per specifications and as directed by Engineer -In-Charge. Note: (i) Tenderer shall note that the cost quoted shall be inclusive of all materials like wash basin, waste coupling, pillar cock, trap, waste pipe, connection pipe, angle stop cock and nails, screws and plugs which are necessary for fixing and cost of labour. (ii) All the above items for quality, colour and make shall be got approved before
Providing and fixing heavy quality 15mm C.P.brass ANGLE STOP COCK without pipe PARRYWARE Agate G607A1 make and suitable SS valve/cup. complete all as per specifications and as directed by Engineer -In-Charge.
Providing & fixing in position heavy pattern screwed down gun metal 25mm GATE VALVES Sant or Leader brand conforming to ISI: 778-1964 (ISI mark with number inscribed on surface) with C.I. hand wheels at top including testing for 10kg/cm2 pressure with clean and potable water with a minimum testing duration of two hours etc. complete as per specifications and as directed by the Engineer-in-Charge.
Providing & fixing in position heavy pattern screwed down gun metal 40mm GATE VALVES Sant or Leader brand conforming to ISI: 778-1964 (ISI mark with number inscribed on surface) with C.I. hand wheels at top including testing for 10kg/cm2 pressure with clean and potable water with a minimum testing duration of two hours etc. complete as per specifications and as directed by the Engineer-in-Charge.
Providing, hoisting and installing at requried elevationmoulded HDPE cylindrical vertical water storage tanks of "SINTEX" or approved equivalent make of the tank 1500 ltr capacities with suitable S.M.C cover at top including the cost of labour for making hole in the storage tank for inlet, outlet, scour and overflow, providing and fixing necessary G.I Niplple ranging from 15mm to 50mm n.b of average 150mm length with double check nuts, washers etc., complete all as directed by the Engineer-in-Charge.
Providing and fixing CP Brass towal rail 600mm long of "jaquar" make complete fixied to walls with 30mm CP brass screws with concealed fitting arrangement all as directed by Enginner-in-charge.
Providing and constructing GULLY CHAMBER of internal finished size300x300mm including providing, supplying and fixing 150 x 150mm stoneware gully trap with CI grating including excavation in all types of soils, backfilling, embedding in plain cement concrete 1:4.5:8 using 40mm size granite aggregates and constructing the above chamber with 110mm thick (plus or minus 5mm) bricks in Cement Mortar 1:5 with well burnt stock bricks, plastering over both internal and external faces of brick work with Cement Mortar 1:3 ; 12mm thick finished smooth with a floating coat of neat cement on both faces, providing and fixing 300 x 300 x 25mm slab in reinforced cement cement concrete of 1:2:4 using 12mm and below hard broken granite stones including cost of steel reinforcement for cover slab, gully trap, chamber all complete and as directed by Engineer In-chare.
Construction of rectangular Manhole/ INSPECTION CHAMBERS of size 900 x 600mm clear internally with brick masonry walls 230mm thick using well burnt stock bricks in Cement Mortar 1:6 (with necessary corbelling as required) plastering with Cement Mortar 1:3 ; 12mm thick inside and outside and inside finished smooth with a floating coat of neat cement and outside trowel finished including excavation in all types of soils, back filling, providing and laying bed concrete 150mm thick and having 150mm wide projection on all the sides with Plain Cement Concrete 1:4.5:8 using 40mm maximum size hard granite broken stone, forming, benching and channeling in Plain cement concrete 1:2:4 using 20mm maximum size hard broken granite stone, finishing smooth all as per drawing and specifications and as directed by Engineer-In-Charge at site - to an initial depth up to 1.00 meter.
Providing and fixing 520 x 390x 6mm Mirrors "Modi Guard" or approved equivalent make with Fibre reinforced plastic frame with gasket and hard board backing including fixing firmly in against brick wall with necessary screws etc complete all as per specifications and as directed by the Engineer -In-Charge.
Providing & Fixing 30mm thick factory made PVC door shutter with door frames of approved colour/shade "sintex / Akrosha" or approved equivalent make and wall thickness 2mm + 0.2mm with inbuilt edging on both sides. The styles and rails mitred ans joined at the corners, including all accessories & fittings like 3 nos. 100mm SS hinges, 2 nos 125mm grip aluminium bow handles, 2 nos of Aluminium 100mm baby latch for each door etc., complete all as directed by Engineer-In-Charge.
Providing and painting with Epoxy Paint (two or more coats) for Roof trusses using APCODUR-CF-641 finishing coat at all locations prepared and applied as per manufacture specifications including a priming coat, preparation of surface and etching with 10%commercial Hydrochloric acid wherever necessary an neutralizing the acid etched areas by washing with 5% solution of soda ash neatly and washing with sufficient water, after first coat Epoxy based trowelling compound if required, including preparation of the surface by scrapping,applying sand paper,filling the holes, joints, cracks if any, etc.complete all as per manufactures Technical Data and as directed at site to achieve 200micron dry film thickness(50 micron primer coat and 150 micron finishing coat ). contractor has to provide Elcometer sampling sheeta etc. at his cost for testing film thickness complete all as per drawings, specifications and as directed by the Engineer-in-Charge.
Providing and applying Weather coat long life 7 premium exterior emulsion with PU silicon of approved brand , shade and colour in two or more coats over a coat of Seal-O-Prime primer to give an even shade on plastered surface of walls, coloumns, parapets, ceilings from inside/out side/walls etc., at all heights, preparation of surface, applying putty, the rate includes applying full putty inside wall, filling the cracks with Asian crack seal material, scaffolding, all tools, tackles, materials, manpowers, equipments, machinery etc., all complete as per specification, drawings and as directed by Engineer-in-charge.
Providing and applying external walls of buildings with Textured paint (One coat of Seal-O-Prime, 3 mm+ thick Ruff-N-Tuff High build Scratch Texture finish and two coats of weather coat long life10 Exterior paint of Berger or approved equivalent make) of approved pattern/designs at all levels. The work involves cleaning & preparing the base surface, applying Berger 3 mm+ thick Ruff-N-Tuff High build Scratch Texture finish over a coat of Seal-O-Prime primer and painting the top surface with two coats of premium weather coat long life 10 exterior emulsion with added PU & silicon. making approved patterns/designs using trowel/ roller, providing vertical/horizontal grooves if any required, etc., complete all as per manufacturer's specification and as directed by Engineer-in-charge.
Providing and Painting Two coats of synthetic enamel paint of approved colour over a coat of primer for Door shutter/window and Frame work and making the surface by scraping, rubbing, applying putty / wood filler etc. compled all as per specifications and as directed by the Engineer-in-Charge.
Providing gravel base 150mm thick (consolidated thickness) for under floor/plinth /Road etc., spreading in uniform layers for filling , breaking clods, watering, rolling, leveling, each layer well rammed and compacting/consolidated by mechanical roller, including the transportation, all tools, tackles, materials, manpower's, machinery, loading and unloading etc., complete as per specifications, drawings and as directed by Engineer-in-charge.
Construction of granular sub-base by providing coarse graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 of MORT&H specifications for road and bridge works (4th revison) specifications and as directed by Engineer -In-Charge and conforming to Grade-III (size range 75 mmto 0.075 mm) having CBR Value-30
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density complete in all respects as per clause 406 of MoRT&H specifications for road and bridge works (4th Revision) and as directed by the Engineer-in-charge
Providing and applying tack coat with bitumen emulsion on prepared surface of granular base including cleaning of road surface and spraying primer @ 0.60 kg/sqm by using mechanical means complete as per the clause 502 of MoRT&H technical specifications for road and bridge works (4th revision) and as directed by the Engineer-in-charge.
Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor on prepared surface, cleaned with mechanical broom etc. and spraying primer @ 0.20 kg/sqm by using mechanical means complete as per the clause 502 of MoRT&H technical specifications for road and bridge works (4th revision) and as directed by the Engineer-in-charge.
Providing and laying dense bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of grading II (19mm nominal size) premixed with bituminous binder @ 4.0 to 4.5% by weight of total mix of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction density complete as per the clause 507 of MoRT&H technical specifications for road and bridge works (4th revision) and as directed by the Engineer-in-charge.
Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of grading II (10mm nominal size) premixed with bituminous binder @ 4.5 to 5% by weight of total mix of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction density complete as per the clause 508 of MoRT&H technical specifications for road and bridge works (4th revision) and as directed by the Engineer-in-charge.
Supplying, laying and jointing the RCC Hume pipe 300 mm dia with collars, IS class NP -2including aligning to proper level and line as directed at site, jointing with Cement Mortar 1:2, curing complete all conforming to IS specifications as per drawing and as directed by Engineer-In-Charge.
SEKAR AND SONS
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .