Providing and Fitting of staff cabin 8ft x12ft at LIS Khiram

Amount

Mechanical transportation, loading, unloading and stacking of various items / machinery equipment using appropriate means of transport as under: Load carrier auto, mini van or similar with 1.0 km lead

Extra per kilometer for lead > 20.0 kms upto 30 Km

Fabrication and Erection of Cabin as below Fabrication ,providing, and errection of wooden frame of size 12’x8’x9’,fabricated out of wooden members(Russain Kael) of 3”x2 1/2” size (12’.00x4+8’.00x4+9’.00x5)x0.25x0.208

Providing and fitting of wooden member of size 3”x2 1/2” Horizontally at proper space on all sides except top ceiling (8’.0’x4+12’.0x4-2’.0”x2)x1/4x1/5

Providing and fitting of wooden member of size 3”x2 1/2” vertically at an equal space/proper place as required size (9’x6)x1/4x1/5

Providing and fitting of wooden member of size 3”x2 1/2” at an equal space of 4’-00’’ on top of the frame along the width of cabin and supporting wooden member along length of cabin as required (8’x2 + 12'x1) x1/4x1/5

Fabrication providing and fitting of window frames for fitting of windows of size 3’x2’fabricated out of 3”x21/2” section wooden members. (4-Nos) (4’x2+3x1)x2x1/4x1/5

Fabrication,Providing and fitting of windows of size 3’x2’fabricated out of 2.5”x3” section wooden members (3’X2+2’X2)X4X1/4x1/5

Fabrication of door of size 2.5’x7’ fabricated out of wooden members of size3’’x21/2’’ covered with 12mm thick ply sheet on both sides fitted with hinges ,handle and locking arrangement. (1-No)

Providing and fixing floating glass panes of 4mm thickness with all necessry fittings

Providing and fixing of 12mm commercial ply wood board to the ceiling and four sides sides (12x9)x2+(8x9)x2+(12x8)-( (2x3)x4+2.5x7 ) = 414.5 SFT - (5x4 window to be cut on wall side for the present window

Illumination of cabin comprises of 2 Nos. lighting points and 02 Nos. of heating points. The lighting point includes, P/F of copper wire multi-stranded 1.5mm2 distributed through PVC channels of reputed make, fixed on walls by means of clamps, nails and rowel pugs, batten type angle holders to each point, LED lamps of 10/12 watt, switch/sockets (6 amp SS combine) further the heating point constitutes distribution of 4mm2 copper wire multi-stranded, through PVC channels fixed on walls by nails and clamps after complete drilling holes, 16A SS combine switches. The job includes P/F of wall fans 01 No.

Providing, applying two coats of wood touch varnish or paint with primer in two coats after making the surface smooth by applying the suitable grade sand paper to whole cabin inside and outside

S T ELECTRICAL ENG WORKS PEERNAR LALGAM TRAL (BID ID -2337434)