Replacement of roofing sheet of terminal and ATC tower, retrofitting of fire station, construction of fire sump and miscellaneous civil works in the operational area and terminal building at Agatti Airport , SH Electrical Works

Supplying and fixing of 8 way,IP 43, IK 09, double door, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, interconnections, powder painted including earthing etc. as rquired. (But without MCB/RCCB/Isolator)

Supplying and fixing of 8 way (8 + 24), IP 43, IK 09, Double door surface/ recess mounting, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder coated, inclusive of required capacity tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required

Supplying and fixing of following Single pole ,240V, 10 Ka, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commisioning etc., as required.

Supplying and fixing of 40A rating, Double pole, 240V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load in the existing MCB DB complete with connections etc., as required.

Supplying and fixing of following Four Pole , 415V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load in the existing MCB DB complete with connections etc., as required.

Supplying and fixing following modular switch on the existing modular plate & switch box including connections etc. as required

5 / 6 amps Modular switch

6 / 16 amps Modular switch

Supplying and fixing following modular socket on the existing modular plate & switch box including connections etc. as required

3 pin 5 / 6 amps Modular socket

6 pin 15/16 amps modular socket

3 x 1.5 sq. mm

3 x 2.5 sq. mm

3 x 4 sq. mm

3 Module

4 Module

6 Module

3.5C x 25 sq.mm

3.5C x35 sq.mm

4 Crore x 16 sq.mm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.(Upto 35sqmm)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ DWC/HUME/ METAL pipe as required.(upto 35sqmm)

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.(Upto 35sqmm)

3.5C x 25 sq.mm

3.5C x35 sq.mm

4Cx 16 sqmm

Supply, Installation, testing & commissioning of 3 Phase, 7.5 HP, Horizontal type Openwell Submersible Pump capable of discharge of 1325 LPM at a head of 15Mtrs, body made of Noryl Impellers, Stainless steel casing, stainer and shaft, suitable to operate on 415V, 3 Phase, 50Hz, supply along with suitable starter control panel, interconnecting cables etc., as required.

63 mm dia

150 mm width X 50 mm depth X 1.6

100 mm width X 50 mm depth X 1.6

150 mm width X 50 mm depth X 1.6

100 mm width X 50 mm depth X 1.6

150 mm width X 50 mm depth X 1.6

100 mm width X 50 mm depth X 1.6

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS/HFFR outer sheath complete as required.

Supply and laying of refrigerant grade copper piping for split air conditioners, with suitable Nitrile rubber insulations for both suction and liquid lines of required sizes, with suitable multicore cable for R-22/R-410A/R-32 systems as OEM etc., as required.

1.5TR Split AC

2TR Split AC

3TR Split AC

Dismantling, shifting and re-commissioning of outdoor units of airconditioners of capacity ranging between 1 TR to 3 TR installed at various locations of Airport including supply and fixing suitable outdoor stand for mounting, disconnections of electrical and refrigerant lines, unmounting from supports and careful handling, charging of refrigerant if required. etc. complete as per directions of E-I-C.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Supply and fixing of 250A, 440 Volts, 4 Pole, 3 Phase Bus Bar Junction Box, made out of MS, suitable for wall/floor mounting, with top/side/bottom cable entry, complete with copper/aluminum bus bars mounted on insulators, locking arrangement, including all necessary hardware, internal wiring, earthing provisions etc., as required.

Supply and fixing of 4-way Bus Bar Box suitable for use as junction boxes and electrical distribution systems complete with SMC base box, provision for simple surface or recess installation, including all accessories, hardwar etc. complete as required.

Supply and fixing of MCB protected socket on surface/recess along with 20A, 230V C curve SP MCB, suitble socket complete with connections etc. as required

Supply and fixing of Four Pole Enclosure on surface/ recess along with 20 A ,415 V, "C" curve, FP MCB, complete with connections etc., as required.

200 A, 25 KA, 4 Pole

400 A, 36 KA,4Pole

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.