FABRICATION AND ERECTION

Amount

BOILER HOUSE

Repairing of belt conveyor roller

Dismantling, fabrication,erection of leak proof Dampers at PA, SA,FD & ID fans

Dis, fabrication and erection work of expansion Bellows AT FD,ID,ESP

M.S.Pipe line work

Steam pipeline work

Ducting work

Strengthening of ducting of boiler.

Dis,Fab & Ere of AirHeater Expansion bellow

Exhust line dismantling, fabrication & erection

Dis, fabrication and erection of ID Fan upper & Lower Casing

Weak portion/ Truff replacement work by M.S plate RBC, MBC, Boiler

Dismantling, Fabrication & Erection of Drum type Rotary Bagasse feeder (with shalf)

Dismantling, Fabrication & Fabrication of Screw feeder

Dismantling, Fabrication & Erection of Screw feeder Casing.

Fabrication & Erection of Man hole

Dis., Fab & Erecting of APH tubes (Replacement)

Dis, fab & Erection of R.O plant pressure vessel stand

Fab & Erection of fire fighting pipe line including Valves, bends, flange & support ( using new pipeline & old drum to drum tubes)

Travelling grate front side ash discharge plate Dis, fab, & erection with structure

Fab & Erection of travelling grate rear plate flange Rs. L.S ( Flange type arrangement )

BOILING HOUSE

Platform work at various stations such as Mill house, Boiler, Turbine,cranes, Boiling house, C/F house etc. if required any where.

Dismenling of electic motor

Fitting of motor

Repairing of exhaust valve

Fab & Erection of double filteration system for quad & water inlet pipe in pan condenser.

Arrangement for lifting of vaccum filtered drums-3 nos

Replacement of exhaust and vapour valves in the boiling House. Dis

Replacement of exhaust and vapour valves in the boiling House Erec-

Fabrication of electric motor cover.

Strengthening of vapour pipe inside & outside with angle iron rings/ M.S.plate.

Manhole work in Vapour pipes/Headers

Modification in Bagacillo chimney

Replacement of vapour pipe. Dis

Exhaust and injection

Replacement of V.pipe bends Dis

Exhaust & Injection bends Fab-

Exhaust & Injection bends Erec.

Dis,Fab & Ere of Final Molasses pipeline

Dis,Fab & Ere of suction pipe for injection,,CT pump

Fab & Erecdtion of M.S.vessels, square & rectangular tank

Increase of shell height with all the fitting and accessories Work.

Fab & Erection of M.S.plate work

Dis,Cleaning & Ere of pipeline (Juice,Massecuite,Srrup,Molasses etc)

Dis,Fab & Ere of Coil(water,juice,ammonia,so2etc)

Fab and erection of Motor bed

Dis,Fab & Ere of NRV for injection,turbine,sprayetc

Saveall of Pan,Quad DIS

Saveall of Pan,Quad FAB

Saveall of Pan,Quad ERE

Unloading of Material from Truck(MS,SS,CI,ACCetc)

Dis,Fab & Ere of Jay pipe

Fitting of Baffle plates

Fabrication of belt conveyor

Fab & Ere of entrainment Catcher.

Roofshed for SO2 Furnace and Vert. Crystalliser

Dismantling, fabrication & erection foot valve

Clarifier coil work a) Dismentling

Clarifier coil work (b) Fabrication

Clarifier coil work ( c) Erection

Dismentling, fabrication & erection of Perforated M.S plates Of Direct contact juice heaters.

Dismentling , fabrication & erection of strainers of Injection, spray , C.T pumps.

Dismentling , erection( with allignment) of planetary gear box of crystallizers.

Nozzles of spray pond, condenser.

Dismantling (earh nozzle)

Fitting (earh nozzle)

Replacement of Double beat valve

Fabrication of exhaust valve casing

Opening & Fitting of Juice Heater Covers

Dismantling & fitting of S.S Tubes in Juice Heater & Evaporator Body

Dismantling, Fabrication & Erection of Intercooler of Sulphur Furnace

Fabrication & Erection cone of Syrup Sulphiter & its Recovery Tower

Dismantling, Fabrication & Erection of Mud Mixture Conveyor

Dismantling, Fabrication & Erection of Mud Mixture Casing

Increasing the height of vertical crystallizer by 1.5 mtrs alongwith driving arrangement, platform, valve, pipe line & centre shaft complete in all respect

Dismantling, fabrication & erection of down take umbrella of Pan

Replacement of 3’’ coil of vertical crystallizer

Gutter Work (bigger side will be treated as dia.)

Gutter Work Dismantling

Gutter Work Fabrication

Gutter Work Erection

Two round welding work if required anywhere

Jammed tube falling film Evaporator

Replacement of C.I cross

Dismantling and Erection of sluice valve

Fabrication / strenghting of beam, vessel, pipe, channel, angle etc.

Dismantling of old belt conveyor structure from Bagasse yard.

Dismantling of pump

Erection and alignment of pump

Replacement of readymade bend

Replacement of ammonia pipe of pan & Quad

Replacing of .S.S coils of vacumm filter

Replacing of worn out brass zig zags & S.S screens of Vaccum Filter

Dismantling of M.S plate

Dismantling of Existing syrup sulphitor & shifting it To molasses tank

Dis., Fab & Erection of Save all cone of evaporator And pans

Shifting of M.S fabricated tank

Dismantling installation and alignment of reduction Gear box.

Dismantling, Fab & erectioning of agitator

Repairing & assembling of complete sugar handing Rs. L.S System with stackers

BOILER/TURBINE, COOLING TOWER SUGAR GODOWN/WORKSHOP/STORE/CANE UNLOADER & FACTORY

Fab & Erection of gate

Strengthning of tress beams,vessel,pipe with channel,angle,pipe etc any where

Roof sheets /ACC /Iron sheet work. Dis-

Roof sheets /ACC /Iron sheet work Repair-

Replacement & Erection

Fab & Erection of M.S.stair/Ladder a) single story

Double story

Cleaning of Cooling Tower water line

Checking & Repairing of Cooling Tower Water line condenser to Cooling Tower

Repair of hydraulic grab of cane unlaoder

Replacement of square bar of cane unlaoder

Repairing and cleaning of cooling tower its nozzle

MISC .ITEMS.

M.S Pipeline per inch dia//ft/length (a ) Dismentling of pipe line.

Upto 1” dia to 12’ dai .

Above 12”

Fabrication of pipe line from M.S.plate or ready-made pipe any dia .

Erection of pipe line per inch dia/ft/length (i) Upto 1’ dia to

Erection of pipe line per inch dia/ft/length (ii. Above 12” dia

M.S.Pipe accessories work, dismantling of bends, Tee, reducder, cross, elbow,nipple,nozzle, flanged, and bends. (per inch dia/ft/length ) (a) Upto 1”dia to 12” dia

M.S.Pipe accessories work, dismantling of bends, Tee, reducder, cross, elbow,nipple,nozzle, flanged, and bends. (per inch dia/ft/length (ii.) Above 12” dia.

Fabrication of bends, tee, reducer etc.-(p.inch dia/ft) (i) upto 1”diato 12” dia

Fabrication of bends, tee, reducer etc.-(p.inch dia/ft) ( ii) above 12" dia..

Erection of bends, tee etc.(per inch dia/ft/length) (i) upto 1” dia to 12” dia

Erection of bends, tee etc.(per inch dia/ft/length) ii) Above 12” dia

ERECTION OF VALVE

Dismantling of valves ,(per inch dia/ft/length) (i) Upto 1” dia to 12” dia

Dismantling of valves ,(per inch dia/ft/length( ii) Above 12” dia

PLATEFORM WORK (Per SFT)

I) Dismantling

II) Fabrication and ereection

a) Patch work with old material.

b) patch with new material .

Purling in work.(per RFT) (i) Dismantling

Fabrication & Erection

Cutting of old flange repairing for reuse & fitting

Dis, fabrication and erection of distance piece

SURAJ FABRICATOR AND ENGINEERS

RAJ CONSTRUCTION CO