Construction of Transit Accommodation (AIS Officers) in the campus of MPHC,Imphal (Phase-II)

Amount

(i)SH:- FIRST FLOOR

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering,

Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete.

(b) Thermo-Mechanically Treated bars.

FORMWORK

Providing form work i/c centering & shuttering so as to give a rough finish strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4m and removal of the same for insitu reinforced concrete to and plain

(b)Columns, pillars, posts and struts (square, rectangular or polygon in plan).

(c) Sides and soffits of beams, beam haunchings, cantilivers, girders, bressumers and lintels not exceeding 1m in depth.

(d)Flat surface such as suspended flloor,roofs, landing & the like (i) floor etc upto 200mm in thickness

(e)Edges of slab and breaks in floor not exceeding 1m in depth

(f) Staircase (e/c landing) slopping or stepped soffits i/c riser and strings etc.

(g) Vertical surface such as walls (any thickness), partition and the like including attached pilasters, buttreese, plinth and the string courses and the like

BRICK WORK

Half brick masonry 2nd class (local first class) in cement mortar 1:4 (1 cement : 4 kanhaighat coarse sand) in superstructure.

(b) Above 1st floor level upto 2nd floor level

WOOD WORK

Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position a) Local best quality Teak wood

P/F 38 mm thick panelled, glazed or panelled & glazed shutters for doors, windows and clerestory windows i/c bright finished brass hinges (ordinary type) with necessary screws.(a) Local best quality Teak wood.

Providing and fixing 19 mm thick Bhutan block board decorative type for shelves /racks ,partitions etc. for cup-board as per design ,drawing and direction of Engineer-in-charge.

Providing 40x3mm flat iron hold fast 40cm long i/c fixing to frames with 10mm dia bolts, nuts and wooden plugs and embedding to cement concrete block 30x10x15cm 1:3:6 (1 cement : kanhaighat coarse sand : 6 stone aggrt. 20mm nominal guage).

Providing and fixing aluminium hanging floor door stopper,ISI marked,anodised (anodic coating not less than grade AC 10 as per IS :1868 ) transparent or dyed to required colour and shade,with necessary screws etc. complete. (b) Twin rubber stopper

P/F Brass Sliding door bolts 300X16 mm with screws & nuts complete.

P/F Brass Tower bolts with screws & nuts complete.(a) 250x10mm

P/F Brass Handles with screws & nuts complete,(a) 125mm

Providing and fixing M.S. hooks and eyes.(i)300mm

P/F Furniture lockcks (Universal furniture lock) by brand name of Godrej with necessary screws etc . Complete (Product Code-2333 UNSPSC Code-46171596SD00028 Baan Code-LKYWFM400).

STEEL WORKS

Providing and fixing stainless steel railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete,

FLOORING

Providing and laying vitrified tiles in different sizes (thickness to be specified by manufacturer ), with water absorption less than 0.08 % and conforming to IS : 15622, of approved make , in all colours & shade ,in laid on 20 mm thick cement mortar 1:4

Providing and laying vitrified tiles in different sizes (thickness to be specified by manufacturer ), with water absorption less than 0.08 % and conforming to IS : 15622, of approved brand and manufacturer , in all colours & shade ,in skirting , riser of

Granite stone slab flooring over 20 mm (average) thick base of cement mortar 1 : 6 (1 Cement: 6 kanhaighat coarse sand ) laid and jointed with grey cement slurry including rubbing and polishing complete with -(a) Granite slab 20 mm slab thick (i)Jade Bl

Marble stone slab flooring over 20 mm (average) thick base of cement mortar 1 : 6 (1 Cement: 6 kanhaighat coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with -(a) white marble slab 20 mm thick (i) 60 x 90 cm

10 mm thick marble tiles in risers of steps , skirting , dado walls and pillars laid on 10 mm thick base of cement mortar 1 : 3 ( 1 Cement: 3 kanhaighat coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with extra for nosing in marble stone for treads (a) White

ALUMINIUM WINDOWS

Providing and fixing glazing in aluminium door,window, ventilator, shutters and partition etc. with EPDM Rubber Neoprene gasket etc complete with float glass paints of 4 mm thick with frames of aluminium hollow tube of 50 x 50 mm and angle of 25 x 40 mm f

Providing and fixing anodised aluminium grill of approved design/pattern,with approved standard section and fixed to the existing window frame with C.P. brass / stainless steel screws @200 mm centre to centre, including cutting the grill to proper opening

FINISHING

12mm cement plaster 1:4 (1 cement : 4 kanhaighat coarse sand).

15mm cement plaster 1:4 (1 cement : 4 Kanaighat coarse sand).

Applying ready mixed priming coat pink primer of appd.quality on wood work.

Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of appd. quality in all shades on new work to give an even shade

Providing and applying wall putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete.

Painting on wall with (two coats) of plastic emulsion paint of approved quality in all shades on new work to give an even shade.

Applying one coat of cement primer of approved quality on wall surface.

Finishing wall weather shield paint of approved quality on new work (three or more coats) to give an even shade.

Providing & fixing on wall face G.I. rain water pipe i/c filling the joints with spun yarn soaked in neat cement slurry & cement mortar 1:2 (1 cement : 2 fine sand) a) 100 mm diameter.

Providing & fixing M.S. holder bat clamps embedded in & i/c cement concrete blocks 112.5 mm X 112.5 mm of 1:2:4 mix (1 cement:2 coarse sand:4 hard stone bollast 20 mm & down gauge). a) 100 mm diameter.

Providing & fixing on walls face G.I. head for rain water pipe i/c filling the joints spun yarn soaked in neat cement slurry & cement mortar 1:2(1 cement:2 fine sand). a) 100 mm diameter.

(ii)SH:- SECOND FLOOR

REINFORCED CEMENT CONCRETE WORK

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering,

Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete.

(b) Thermo-Mechanically Treated bars.

FORMWORK

Providing form work i/c centering & shuttering so as to give a rough finish strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4m and removal of the same for insitu reinforced concrete to and plain

(b)Columns, pillars, posts and struts (square, rectangular or polygon in plan).

(c) Sides and soffits of beams, beam haunchings, cantilivers, girders, bressumers and lintels not exceeding 1m in depth.

(d)Flat surface such as suspended flloor,roofs, landing & the like (i) floor etc upto 200mm in thickness

(e)Edges of slab and breaks in floor not exceeding 1m in depth

(f) Staircase (e/c landing) slopping or stepped soffits i/c riser and strings etc.

(g) Vertical surface such as walls (any thickness), partition and the like including attached pilasters, buttreese, plinth and the string courses and the like

BRICK WORK

Half brick masonry 2nd class (local first class) in cement mortar 1:4 (1 cement : 4 kanhaighat coarse sand) in superstructure.

(c) Above 2nd floor level upto 3rd floor level

WOOD WORK

Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position a) Local best quality Teak wood

P/F 38 mm thick panelled, glazed or panelled & glazed shutters for doors, windows and clerestory windows i/c bright finished brass hinges (ordinary type) with necessary screws.(a) Local best quality Teak wood.

Providing and fixing 19 mm thick Bhutan block board decorative type for shelves /racks ,partitions etc. for cup-board as per design ,drawing and direction of Engineer-in-charge.

Providing 40x3mm flat iron hold fast 40cm long i/c fixing to frames with 10mm dia bolts, nuts and wooden plugs and embedding to cement concrete block 30x10x15cm 1:3:6 (1 cement : kanhaighat coarse sand : 6 stone aggrt. 20mm nominal guage).

Providing and fixing aluminium hanging floor door stopper,ISI marked,anodised (anodic coating not less than grade AC 10 as per IS :1868 ) transparent or dyed to required colour and shade,with necessary screws etc. complete. (b) Twin rubber stopper

P/F Brass Sliding door bolts 300X16 mm with screws & nuts complete.

P/F Brass Tower bolts with screws & nuts complete.(a) 250x10mm

P/F Brass Handles with screws & nuts complete,(a) 125mm

Providing and fixing M.S. hooks and eyes.(i)300mm

P/F Furniture lockcks (Universal furniture lock) by brand name of Godrej with necessary screws etc . Complete (Product Code-2333 UNSPSC Code-46171596SD00028 Baan Code-LKYWFM400).

STEEL WORKS

Providing and fixing stainless steel railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete,

FLOORING

Providing and laying vitrified tiles in different sizes (thickness to be specified by manufacturer ), with water absorption less than 0.08 % and conforming to IS : 15622, of approved make , in all colours & shade ,in laid on 20 mm thick cement mortar 1:4

Providing and laying vitrified tiles in different sizes (thickness to be specified by manufacturer ), with water absorption less than 0.08 % and conforming to IS : 15622, of approved brand and manufacturer , in all colours & shade ,in skirting , riser of

Granite stone slab flooring over 20 mm (average) thick base of cement mortar 1 : 6 (1 Cement: 6 kanhaighat coarse sand ) laid and jointed with grey cement slurry including rubbing and polishing complete with -(a) Granite slab 20 mm slab thick (i)Jade Bl

Marble stone slab flooring over 20 mm (average) thick base of cement mortar 1 : 6 (1 Cement: 6 kanhaighat coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with -(a) white marble slab 20 mm thick (i) 60 x 90 cm

10 mm thick marble tiles in risers of steps , skirting , dado walls and pillars laid on 10 mm thick base of cement mortar 1 : 3 ( 1 Cement: 3 kanhaighat coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with extra for nosing in marble stone for treads (a) White

ALUMINIUM WINDOWS

Providing and fixing glazing in aluminium door,window, ventilator, shutters and partition etc. with EPDM Rubber Neoprene gasket etc complete with float glass paints of 4 mm thick with frames of aluminium hollow tube of 50 x 50 mm and angle of 25 x 40 mm f

Providing and fixing anodised aluminium grill of approved design/pattern,with approved standard section and fixed to the existing window frame with C.P. brass / stainless steel screws @200 mm centre to centre, including cutting the grill to proper opening

FINISHING

12mm cement plaster 1:4 (1 cement : 4 kanhaighat coarse sand).

15mm cement plaster 1:4 (1 cement : 4 Kanaighat coarse sand).

Applying ready mixed priming coat pink primer of appd.quality on wood work.

Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of appd. quality in all shades on new work to give an even shade

Providing and applying wall putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete.

Painting on wall with (two coats) of plastic emulsion paint of approved quality in all shades on new work to give an even shade.

Applying one coat of cement primer of approved quality on wall surface.

Finishing wall weather shield paint of approved quality on new work (three or more coats) to give an even shade.

Providing & fixing on wall face G.I. rain water pipe i/c filling the joints with spun yarn soaked in neat cement slurry & cement mortar 1:2 (1 cement : 2 fine sand) a) 100 mm diameter.

Providing & fixing M.S. holder bat clamps embedded in & i/c cement concrete blocks 112.5 mm X 112.5 mm of 1:2:4 mix (1 cement:2 coarse sand:4 hard stone bollast 20 mm & down gauge). a) 100 mm diameter.

Providing & fixing on walls face G.I. head for rain water pipe i/c filling the joints spun yarn soaked in neat cement slurry & cement mortar 1:2(1 cement:2 fine sand). a) 100 mm diameter.

(iii)SH:- THIRD FLOOR

REINFORCED CEMENT CONCRETE WORK

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering,

Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete.

(b) Thermo-Mechanically Treated bars.

FORMWORK

Providing form work i/c centering & shuttering so as to give a rough finish strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4m and removal of the same for insitu reinforced concrete to and plain

(b)Columns, pillars, posts and struts (square, rectangular or polygon in plan).

(c) Sides and soffits of beams, beam haunchings, cantilivers, girders, bressumers and lintels not exceeding 1m in depth.

(d)Flat surface such as suspended flloor,roofs, landing & the like (i) floor etc upto 200mm in thickness

(e)Edges of slab and breaks in floor not exceeding 1m in depth

(f) Staircase (e/c landing) slopping or stepped soffits i/c riser and strings etc.

(g) Vertical surface such as walls (any thickness), partition and the like including attached pilasters, buttreese, plinth and the string courses and the like

BRICK WORK

Half brick masonry 2nd class (local first class) in cement mortar 1:4 (1 cement : 4 kanhaighat coarse sand) in superstructure.

(d) Above3rdd floor level upto 4th floor level

WOOD WORK

Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position a) Local best quality Teak wood

P/F 38 mm thick panelled, glazed or panelled & glazed shutters for doors, windows and clerestory windows i/c bright finished brass hinges (ordinary type) with necessary screws.(a) Local best quality Teak wood.

Providing and fixing 19 mm thick Bhutan block board decorative type for shelves /racks ,partitions etc. for cup-board as per design ,drawing and direction of Engineer-in-charge.

Providing 40x3mm flat iron hold fast 40cm long i/c fixing to frames with 10mm dia bolts, nuts and wooden plugs and embedding to cement concrete block 30x10x15cm 1:3:6 (1 cement : kanhaighat coarse sand : 6 stone aggrt. 20mm nominal guage).

Providing and fixing aluminium hanging floor door stopper,ISI marked,anodised (anodic coating not less than grade AC 10 as per IS :1868 ) transparent or dyed to required colour and shade,with necessary screws etc. complete. (b) Twin rubber stopper

P/F Brass Sliding door bolts 300X16 mm with screws & nuts complete.

P/F Brass Tower bolts with screws & nuts complete.(a) 250x10mm

P/F Brass Handles with screws & nuts complete,(a) 125mm

Providing and fixing M.S. hooks and eyes.(i)300mm

P/F Furniture lockcks (Universal furniture lock) by brand name of Godrej with necessary screws etc . Complete (Product Code-2333 UNSPSC Code-46171596SD00028 Baan Code-LKYWFM400).

STEEL WORKS

Providing and fixing stainless steel railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete,

FLOORING

Providing and laying vitrified tiles in different sizes (thickness to be specified by manufacturer ), with water absorption less than 0.08 % and conforming to IS : 15622, of approved make , in all colours & shade ,in laid on 20 mm thick cement mortar 1:4

Providing and laying vitrified tiles in different sizes (thickness to be specified by manufacturer ), with water absorption less than 0.08 % and conforming to IS : 15622, of approved brand and manufacturer , in all colours & shade ,in skirting , riser of

Granite stone slab flooring over 20 mm (average) thick base of cement mortar 1 : 6 (1 Cement: 6 kanhaighat coarse sand ) laid and jointed with grey cement slurry including rubbing and polishing complete with -(a) Granite slab 20 mm slab thick (i)Jade Bl

Marble stone slab flooring over 20 mm (average) thick base of cement mortar 1 : 6 (1 Cement: 6 kanhaighat coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with -(a) white marble slab 20 mm thick (i) 60 x 90 cm

10 mm thick marble tiles in risers of steps , skirting , dado walls and pillars laid on 10 mm thick base of cement mortar 1 : 3 ( 1 Cement: 3 kanhaighat coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with extra for nosing in marble stone for treads (a) White

ALUMINIUM WINDOWS

Providing and fixing glazing in aluminium door,window, ventilator, shutters and partition etc. with EPDM Rubber Neoprene gasket etc complete with float glass paints of 4 mm thick with frames of aluminium hollow tube of 50 x 50 mm and angle of 25 x 40 mm f

Providing and fixing anodised aluminium grill of approved design/pattern,with approved standard section and fixed to the existing window frame with C.P. brass / stainless steel screws @200 mm centre to centre, including cutting the grill to proper opening

FINISHING

12mm cement plaster 1:4 (1 cement : 4 kanhaighat coarse sand).

15mm cement plaster 1:4 (1 cement : 4 Kanaighat coarse sand).

Applying ready mixed priming coat pink primer of appd.quality on wood work.

Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of appd. quality in all shades on new work to give an even shade

Providing and applying wall putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete.

Painting on wall with (two coats) of plastic emulsion paint of approved quality in all shades on new work to give an even shade.

Applying one coat of cement primer of approved quality on wall surface.

Finishing wall weather shield paint of approved quality on new work (three or more coats) to give an even shade.

Providing & fixing on wall face G.I. rain water pipe i/c filling the joints with spun yarn soaked in neat cement slurry & cement mortar 1:2 (1 cement : 2 fine sand) a) 100 mm diameter.

Providing & fixing M.S. holder bat clamps embedded in & i/c cement concrete blocks 112.5 mm X 112.5 mm of 1:2:4 mix (1 cement:2 coarse sand:4 hard stone bollast 20 mm & down gauge). a) 100 mm diameter.

Providing & fixing on walls face G.I. head for rain water pipe i/c filling the joints spun yarn soaked in neat cement slurry & cement mortar 1:2(1 cement:2 fine sand). a) 100 mm diameter.

(iv)SH:- FOURTH FLOOR

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering,

Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete.

(b) Thermo-Mechanically Treated bars.

FORMWORK

Providing form work i/c centering & shuttering so as to give a rough finish strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4m and removal of the same for insitu reinforced concrete to and plain

(b)Columns, pillars, posts and struts (square, rectangular or polygon in plan).

(c) Sides and soffits of beams, beam haunchings, cantilivers, girders, bressumers and lintels not exceeding 1m in depth.

(d)Flat surface such as suspended flloor,roofs, landing & the like (i) floor etc upto 200mm in thickness

(e)Edges of slab and breaks in floor not exceeding 1m in depth

(f) Staircase (e/c landing) slopping or stepped soffits i/c riser and strings etc.

(g) Vertical surface such as walls (any thickness), partition and the like including attached pilasters, buttreese, plinth and the string courses and the like

BRICK WORK

Half brick masonry 2nd class (local first class) in cement mortar 1:4 (1 cement : 4 kanhaighat coarse sand) in superstructure.

(d) Above3rdd floor level upto 4th floor level

Th Bimolchand Luwang

Guigui Kamei