REPAIR/ MAINT OF ALL TYPES OF FANS, GEYSERS AND OTHER CONNECTED ITEMS AT AHRR UNDER GE E/M RR HOSP. DELHI CANTT-10

Amount

Taking down Old U/S Ceiling fan of Sweep, any make, 1200 mm, 230 volts of any make from any height of the building for depositing to MES store all as specified and as directed by Engineer in charge.

Taking down Old U/S Ceiling fan of Sweep, any make, 1400 mm, 230 volts of any make from any height of the building for depositing to MES store all as specified and as directed by Engineer in charge.

Taking down Ceiling fan of Sweep, any make, 1200/1400mm, 230 volts of any make & size from any height of the building for finding out the defects such as Capacitor, bearing etc and servicing / overhauling the same, including replacing minor accessories like locking pins, rubber real, PVC sleeve, greasing, clamps, etc as required, and fixing back the same in its original position along with necessary fixing materials such as nut, bolts and washers etc all as specified and as directed by Engineer in charge. Note:- The spares referred / mentioned here-In- after shall only be paid under supply only. Rest of the spares required for functioning of the fans is deemed to be included in the unit rate quoted. The labour element required for replacing the spares listed here-In -after shall be deemed to included in the unit rate quoted.

Taking down Exhaust fans heavy duty of Sweep 200 to 600mm, 230 volts of any make & size from walls/ trusts for finding out the defects such as Capacitor, bearing etc and servicing/ overhauling the same and fixing back the same in its original position along with necessary fixing materials such as nut, bolts and washers etc or depositing to MES store if irrepairable all as specified and as directed by Engineer in charge. Note:- The spares referred / mentioned here-In- after shall only be paid under supply only. Rest of the spares required for functioning of the fans is deemed to be included in the unit rate quoted. The labour element required for replacing the spares listed here-In -after shall be deemed to included in the unit rate quoted.

Taking down Wall mounted/Air circulator/Pedestal fans of Sweep upto 630 mm, 230 volts of any make & size from walls/floors for finding out the defects such as Capacitor, bearing etc and servicing/ overhauling the same and fixing back the same in its original position along with necessary fixing materials such as nut, bolts and washers etc all as specified and as directed by Engineer in charge.. Note for Item Sl No 3 to 5 : (i). Cost of Bearing, Capacitor and rewinding will be measured and paid separately under the respective item of the Schedule. (ii) Labour element for removing and refixing the Bearing and removing and rewinding the winding will be measured in the respective of the schedule. (iii) Misc items such as nut & bolts, Rubber bush & locking pin etc required for satisfactory completion of job deemed to be inclusive of the unit rate.

Rewinding of fan motor of any make Sweep 1200 to 1400mm and rewinding the same with single strand fine enamel copper conductor of same guage weight and turns and keeping the windings into hot air oven till the moisture evaporates including testing and commissioning complete. Make :Devi Dayal/Atlas/BPL Note : (1) All the misc items such as impregranted paper, warnising, cotton tape and other misc items required for satisfactory completion of job deemed to be included in the unit rate. (2) The above repairs are considered to meet the anticipated requirement if any and based on the site requirement the scope will be handed over to the Contractor.

All as item No 06 here in above but for Exhaust fan 200 to 380 mm sweep.

All as item No 06 here in above but for Exhaust fan 450 mm sweep.

All as item No 06 here in above but for Pedestal /Air circulator/ Wall mounted fan upto 630 mm sweep.

Supply only ball bearing suitable for ceiling / exhuast fan/ Pedestal fan/ Wall fan of any type / size / make, complete all as specified and directed.

Supply only capacitor of 2.5 mfd, 440V, 50 Hz suitable for ceiling / exhaust / cabin / air-circulator / Padestal fan of any type / make / size, complete all as specified and directed by Engr-in-Charge.

All as per srl item no 11 here-in-before but of 3.15/4 mfd capacity.

All as per srl item no 11 here-in-before but of 6/8.0 mfd capacity.

Supply only metallic fan blades (Set of 3 or 4 blades) of existing pattern & colour scheme including screws suitable for ceiling fan of any make / model / sweep size, complete all as directed.

All as per srl item no 14 here-in-before but for Exhaust fan of 225 to 380 mm sweep size.

All as per srl item no 14 here-in-before but for Exhaust of 450 mm sweep size.

All as per srl item no 14 here-in-before but for Wall fan/Air circulated fan of upto 630 mm sweep size.

Supply only factory made ceiling fan down rod 0.45 m long, made out of heavy grade MS conduit of 19/20 mm outer dia, with hole at both ends for passing cable, cut at one end for fixing of fan, hole at other end for fixing fan clamp, duly painted with white synthetic enemel paint of 1st quality, complete all as specified and directed.

All as per srl item no 18 here-in-before but 0.6/0.75 m long complete all as specified and directed.

All as per srl item no 18 here-in-before but 0.9 m long complete all as specified and directed.

Supply and fix in replacement of fresh air fan of PVC body single phase, 240 volts, upto 1200 RPM of 200mm sweep, copper winding complete all as specified and directed by Engr-in-Charge.

All as per sl item No 21 But 250 mm Sweep.

All as per sl item No 21 But 300 mm Sweep.

S&F in repair cuboid type ceiling fan ready to fix in the ceiling of 2ft x 2ft sizewith integrated LED light complete with all fixing accessories complete all as specified and directed.

S&F ceiling fans complete with blades, down rods, electronic regulator, 230V, 1200 mm sweep min. air delivery 210 CFM with service value BEE, Five Star with BLDC Motor with remote control for speed control against irrepairable fans to be declared BER as per policy.

S&F ceiling fans complete with blades, down rods, electronic regulator, 230V, 1400 mm sweep min. air delivery 245 CFM with service value BEE, Five Star with BLDC Motor with remote control for speed control against irrepairable fans to be declared BER as per policy.

S&f in repair PVC canopy suitable for 1200/1400 mm sweep fan complete all as specified and as directed by Engineer-in-charge.

Supply only gun metal bush suitable for 1200/1400 mm sweep ceiling fans

Supply only ceiling fan clamp assembly along with rubber reel for any type and any description.

Preparation of surface and painting the Ceiling fan unit of sweep 1200/1400 mm (consisting of Fan motor, blades, canopy and downrod) with one coat of synthetic enamel paint of existing colour and marking the MES number on the fan motor with suitable paints all as directed by the Eng-in-Charge complete. Make :- Asian / Berger / Jenson.

Taking down defective BLDC Ceiling fan of any Sweep, any make, 1200/1400 mm, 230 volts of any make & size from any height of the building for finding out the defects and replaced the defective parts like as BLDC Circuit plate,diode,AC convertor including servicing / overhauling the same, including replacing minor accessories like locking pins, rubber real, PVC sleeve, greasing, clamps, etc as required, and fixing back the same in its original position along with necessary fixing materials such as nut, bolts and washers etc all as specified and as directed by Engineer in charge.

Supply only BLDC ceiling fan remote control for any size of and capacity as per existing make and model , totally compatible, with speed control offering multiple speed settings and other standard controls like turning fan ON/OFF,setting timers etc. all as specified and directed by Engineer in charge.

M&L for lathe work to any type of fan for taking fan stator shaft from bush/ball bearing, welding shaft and grinding shaft on lathe machine to exact size required to fix on bush/ball bearing with necessary bearing boring, cutting, greasing, polishing of shaft Complete all as specified and as directed by Engineer-in-charge. Note : - Supply & fixing to Bearing shall be measured and paid separately under respective item of this Schedule.

Supply and fixing in repair PVC exhaust fan 200 mm seeep single phase 240 volts, 50 Hz connecting up including provision of PVC in repair insulated unsheathed copper conductor flexible cable 3 cores 23/0.0076 and fixed on wall by using 4 Nos 100 mm long 12 mm dia bolt nuts and washers and grouted in wall in cm (1:3) including opening in wall of suitable) size for exhaust fan & making good to disturbed surface of wall with PCC (1:2:4) Type-B-1 or cement mortar CM (1:3) against irrepairable fans to be declared BER as per policy complete all as specified and as directed by Engineer-in-Charge.

All as per item no 34 here-in-before but 250 mm sweep.

All as per item no 34 here-in-before but 300 mm sweep.

Replacement of exhaust fan motor 450 mm sweep Cooper wound 50Hzs 230 Volt complete all as directed

Replacement of exhaust fan motor 300 mm sweep Cooper wound 50Hzs 230 Volt complete all as directed.

Supply and fix in repair metal body louvers heavy duty including fixing accesoories of size 230 mm sweep to 380 mm sweep complete all as specified and directed.

Supply and fix in repair metal body louvers heavy duty including fixing accesoories of size 450 mm sweep complete all as specified and directed.

Replacement of exhaust fan clamps with legs(Brackets) suitable for 450 mm sweep exhaust fan complete.

Replacement of exhaust fan clamps with legs(Brackets) suitable for 300 mm sweep exhaust fan complete.

Taking down unserviceable Geysers of any capacity/type/make from various locations by disconnecting the electrical connection and Overhauling the geysers for necessary repair work comprising opening, descaling, brushing and cleaning of storage tank and examining of water tightness of storage tank after cleaning and descaling, checking & connecting earth continuity of electric items, adjusting of pressure release valves, checking of dead weight, cleaning of vent hole, including replacements of all defective parts of the geysers after repair, applying one coat of synthetic enemal paint (white colour) after prepration of old surfaces and testing complete all as specified and directed. Note- 1. Any parts other than indicated in item shall be measured and paid seperately under respective items here-in-after as supply only, however labour charges for taking down and fixing of these parts(except parts catered as M&L or S&F) are deemed to be included in quoted rates. 2. Contractor to ensure to depute the electrician once a day for attending and taking out/down and refixing again duly repaired the geyser with in 08 hrs after receiving the complaint.

Supply only heating element 2 KW capacity ISI Marked suitable for geyser of any type / Make and capacity complete all as specified and directed.

Supply only heating element 3 KW capacity ISI Marked suitable for instant geyser of any type / Make and capacity complete all as specified and directed.

Supply only thermostat for Geyser 0 to 80 degrees capacity 230 volts as suits the existing geyser of any type and capacity all as specified and directed by Engg-in-Charge.

Disconnecting and removing the unserviceable and Supply and fix in repairs Stain less steel inner tank as per existing make of 25 liter capacity geysers of existing make & model including minor accessories & testing after assembled & fixed at site complete all as specified and as directed by Engineer-in-Charge.

All as per above item No 47 here-in-before but 50 ltr capacity.

All as per above item No 47 here-in-before but 10 ltr capacity.

Supply and fix outer shell of suitable size made of steel sheet for geyser of any type/Make and 25 litres capacity complete with two coats of synthetic enamel paint over one coat of primer by spray gun with all suitable accessories, complete all as specified and directed.

All as per Srl No items No 50 here-in-before but 50 ltrs capacity.

All as per Srl No items No 50 here-in-before but 10 ltrs capacity.

Supply only of indicator lamp set of Red &Green colour, suitable for geyser of any type / Make and capacity ISI marked including making necessary electric connection complete all as specified and directed.

Supply only appratus plate assembly 6 hole/9 hole complete with inlet / outlet, thermostat pipes with drain plug and screw including clamps for holding the elements, nuts, bolt etc, for geyser of any type/Make and 10 ltrs to 50 litres capacity complete all as specified and directed.

Supply only bottom cover plate (2 valves) with matching colour of geysers of any type and capacity complete all as specified and directed.

Supply only non return valve in position ISI marked made out of cast copper alloy, internally screwed on one end and externally screwed on other end suitable for iron pipe of size 15 mm, suitable for geysers of any type/Make and capacity complete all as specified and directed.

S&F SS connection AISI 304 grade stainless steel 450 mm long for cold / hot water heavy duty, flexible braided design, leak proof and suitable for both hot and cold water connections,corrosion resistant, long service life, along with coupling/Nuts of SS too for 15 mm bore.

S&F SS connection AISI 304 grade stainless steel 600 mm long for cold / hot water heavy duty, flexible braided design, leak proof and suitable for both hot and cold water connections,corrosion resistant, long service life, along with coupling/Nuts of SS too for 15 mm bore.

Supply only of new insulating material made of PUF / glass wool of superior quality of 16 Kg / Cum density in geyser of any Type/Make of 10 ltrs to 50 litres capacity complete all as specified and directed.

S&F in repair GI fastner 10 mm dia x 100 mm long duly threaded with GI nut and washer etc for holding geyser (set of 04 Nos) including fixing arrangement by making necessary holes and using cement mortar(1:2) or PCC 1:2:4 and making good the disturbed surface as per existing complete all as specified and directed. (Note: 04 Nos fasteners shall be measured as one job)

Supply only vaccum release valve complete all as specified and directed.

Supply only Pressure release valve complete all as specified and directed.

S&F in repairs Plug top 3-pin, 16 Amp

S&F in repairs Rubber 'O' ring /gaskit for 25/50/10 ltrs

S&F for replacement to unserviceable flexible PVC insulated lead in lieu of provided with new flexible PVC insulated sheathed copper conductor connection lead 3-core ,size 40/0.0076 cable suitable for Geyser Complete all as specified and as directed by Engineer-in-Charge.

Point wiring using approved colour coding as per IS ,with stranded copper conductor 2.5 sqmm (nominal area ) single core , FRLSH flame retardant low smoke and low halogen PVC insulated unsheathed , 1100 V grade conforming to IS 694 ,marked TEC and FIA approved in and including PVC conduit medium grade ISI marked 20mm dia with all fittings and accessories, concealed type/ surface type (surface type only on ceiling), PVC junction boxes, modular metal sunkun/ flush boxs of any modules from 2 to 18 Modules with Inner and outer modular cover plates, including FRLSH flame retardant low smoke and low halogen rigid PVC insulated unsheathed stranded copper conductor 2.5 Sqmm (nominal area )single core cable as earth continuity conductor to common earth and connected to earth dolly for Modular Switch one way 16 Amps one module on independent board complete all as specified and directed by Engr-in-charge. Note :- 1. Cutting/chasing of wall etc. deemed to be included in the quoted rate of this item. 2. Modular metal flush/sunken Box along with modular cover plate & sheets are inclusive in the item rate quoted.

M&L for Sub main wiring/power wiring complete with two runs of 4.0 Sqmm, single core, PVC insulated, unsheathed FRLSH cable, 1100 Volts grade, multistranded with copper conductor, drawn through and including suitable size of rigid non metallic PVC conduit pipe and accessories on surface wall/floors/concealed etc., with one run of PVC insulated, 4.0Sqmm FRLS copper conductor for earth continuity as per IS colour coding all as specified and as directed. NOTE :- Two runs of main copper conductor, one run of copper conductor for earth continuity and one run of conduit shall be measured as one unit length

M&L for Sub main wiring/power wiring complete with two runs of 6.0 Sqmm, single core, PVC insulated, unsheathed FRLSH cable, 1100 Volts grade, multistranded with copper conductor, drawn through and including suitable size of rigid non metallic PVC conduit pipe and accessories on surface wall/floors/concealed etc., with one run of PVC insulated, 6.0Sqmm FRLS copper conductor for earth continuity as per IS colour coding all as specified and as directed. NOTE :- Two runs of main copper conductor, one run of copper conductor for earth continuity and one run of conduit shall be measured as one unit length

M&L for Sub main wiring/power wiring complete with two runs of 10.0 Sqmm, single core, PVC insulated, unsheathed FRLSH cable, 1100 Volts grade, multistranded with copper conductor, drawn through and including suitable size of rigid non metallic PVC conduit pipe and accessories on surface wall/floors/concealed etc., with one run of PVC insulated, 10.0Sqmm FRLS copper conductor for earth continuity as per IS colour coding all as specified and as directed. NOTE :- Two runs of main copper conductor, one run of copper conductor for earth continuity and one run of conduit shall be measured as one unit length

S&F for sheet metal enclosure with single pole and neutral with two pin and earth plug socket including 20Amp 240 Volt including MCB SP,20Amp as in repair complete all as specified and as directed by Engineer-in-Charge.

M & L in repair of hot food trolley of any shape and size including broken wheel base, pulling handle, hinges, doors, door supports, chains, leakages of water etc using stainless steel sheet of min 2.0 mm thickness and SS brackets, angles, hollow tubes, flats etc of any shape of size with and including SS hinges, screws / fasteners, complete electrical work, all kind of machine works i.e. cutting, SS welding, bending, moulding, grinding, polishing, buffing etc to get the required strength, shape and size, fixed to any position and makes functional complete all as specified and directed by Engr-in-Charge. Note : 1. The cost of all kind of SS material i.e. sheet, angle, tube flat, all kind of fittings & fixtures i.e. hinges, screws / fasteners, handles etc (except the parts catered here-in-after as supply only) are deemed to be included in quoted rates and no extra cost shall be paid to the contractor in this effect. 2. The cost of transportation (to and fro) and other necessary equipment shall be arranged/brought by contractor and no extra cost shall be paid to the contractor in this effect. 3. The defective spare parts as catered supply only shall be paid and measured seperately in relevant items here-in after.

Supply only 25 Amps socket multipurpose complete all as specified and directed by Engr-in-Charge.

Supply only PVC insulated, PVC sheathed, multistranded copper conductor wire of 2.5 Sqmm size, three core, ISI marked, complete all as specified and directed by Engr-in-Charge.

Supply only 150 mm dia caster wheel with swivel type heavy duty supporting base plate bracket complete with nut and bolts etc suitable for hot food trolley, complete all as specified and directed by Engr-in-Charge.

Supply only 150 mm dia caster wheel with fixed type heavy duty supporting base plate bracket complete with nut and bolts etc suitable for hot food trolley, complete all as specified and directed by Engr-in-Charge.

Supply only dry type U shaped heating element 2 KW of length minimum 2 mtr suitable for hot food trolley, complete all as specified and directed by Engr-in-Charge.

M&L for maintenance / servicing of Automatic/ sensor silliding door including replacement of defective /spare parts/items such as such as side plate, timming belt, hanger roller, cable tray Plates motor, controller belt connector Belt adjust Pully etc excluding Door Glass, when required by automatic door technician / Engineers must be qualified to work on automatic door and make it in proper functning complete all as specified and directed by Engr-in-Charge. Note :-1. To provide the evidence that parameter are adhered too and safety devices are in place 2. if the fault found which affects safe operation of the door, then the door operating equipement must be switched off and the door made safe.

Supply and fix in repair SMPS assembly for automatic sliding door complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair MDU controller assembly for automatic sliding door complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair motor assembly for automatic sliding door complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair return pulley assembly for automatic sliding door complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair main roller for automatic sliding door complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair counter roller for automatic sliding door complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair sensor for automatic sliding door complete all as specified and directed by Engr-in-Charge.

SHALIMAR INTERIORS (BID ID -3449822)

M/S Hind Constructions (BID ID -3456400)

RUCHIKA ENGG.WORKS (BID ID -3450945)

GLIBS CONSTRUCTION (BID ID -3450758)