Urgent repairs and renovation to the Legal Cell and Budget, Account Section in the Additional Block of Circle I Building, PWD, Puducherry.

Amount

Diluting and injecting chemical emulsion for POST - CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) - tratment of soil under existing flooors using chemical emulsion @ one litre per hole, 300mm apart including drilling 12mm diametre holes and plugging with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor - with Chlorpyriphos / lindane E.C. 20% with 1% concentration.

Diluting and injecting chemical emulsion for POST - CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) - treatment at points of contact of wood work by chemical emulsion Chlorpyriphos / Lindane ( in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6mm dia holes at downward angle of 45 degree at 150mm centre to centre and sealing the same.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS :3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm ), with necessary accessories and screws etc complete.

Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc.complete - 125 X 75 X 4 mm.

Providing and fixing aluminium sliding door bolts, ISI marked, anodised ( anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc complete - 250 X 16 mm.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS :1868), transparent or dyed to required colour or shade, with necessary screws etc. Complete - 150 x10 mm.

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc, complete - 125 mm.

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc complete - Single rubber stopper.

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc complete - Twin rubber stopper.

Wall painting with acrylic emulsion paint of approved brand and manufacturer to give an even shade - two or more coats on new work.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc complete.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade - One or more coats on old work.

Poilising the existing mosaic floor with Power polisher to a high degree of polish as to be perfectely smooth.

Acid cleaning for the existing Mosaic floors , glazed tiles work and removing the stains and decays to give a glassy look etc complet (The Acid used shall be 32% concentrated hydrochloric acid after taking on the precautionary measures).

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps ,32 mm C.P.brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required - white Vitreous China wash basin size 630x450 mm with a single 15 mm C.P.brass pillar taps.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P.brass screws and washers complete.

Providing and fixing C.P.brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms - 15 mm nominal bore.

Providing and fixing C.P.brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 8931- 15 mm nominal bore.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings ( cost of aluminium snap beading shall be paid in basic item) - with float glass panes of5.50 mm thickness.

Attending repair works to aluminium sliding windows and ventilators including the cost of rubber beading, handle locks, hinges, screws and labour charges excluding cost of glass panes and as directed by the Engineer-in-charge.

Providing cutting and fixing to required shape and design 19mm thick plywood (BWR) For cupboard & shutters/table top/ bottom/ sides/ furniture/ partitions and the like. The rate is inclusive of cost of materials, all taxes, wastages, screws, nails, fevicol SH, special labour charges for making cupboard & shutters/ furnitures and finishing the surface neat after fixing in required position as directed by the Engineer-in-charge.

Providing and fixing stainless steel Buttertly hinges with necessary screws etc., complete.

Providing and fixing Multipurpose lock with necessary screws etc, complete.

Providing and fixing 100mm stainless steel handies with necessary screws etc., complete.

Providing and fixing 8mm thick prelaminated Bison Board flat pressed three layer or graded wood particle board conforming to IS:12823 grade-I type-II in paneling fixed in aluminium door, window shutters and partition frames with C.P brass/ stainless steel screws etc., complete as per architectural drawings perlaminated particle board with decorative lamination on one side and balancing lamination on other side all as directed by the Engineer-in-charge.

Gas filling charges for Air Conditioners

Checking, repairing and servcing for indoor and outdoor units of A.C

Shifting charges for 2.0 ton Air conditioner Units.

Supplying of Extra copper tube

Civil and angle works for indoor and outdoor units (including materials and labour charges)

Servicing and replacing of defective spare parts in remote control board A.C.

M. SATISH