Gandhi Museum - Open air theatre

Amount

Supply and erection of 8m free standing decorative single arm bracket 8 sided Octogonally continously tapered structured pole with base plate of size 300 x 300 x 12mm as per IS-875 with following specification. Bottom Pole Dia - 130mm Top Pole Dia - 70 mm Thickness of Pole - 3mm The pole should be hot dip galvanized confirming to BESN ISO- 1461 with thickness of 65 Micron. The octagonal pole shall be erected with bridge wall making M20 grade reinforced cement concreate foundation by considering the safe soil bearing capacity at suitable for site as Minimum10 T / sqmm at 1.7 m depth including supply of steel, concrete, excavation and fixing of provided nut bolts wiht help of template duly plastered as per design complete. Supply and fixing of 1No 150W LED street light and 2Nos 150W Flood light luminaire arrangments suitable angle iron frame with (Higher End) with hot dip galvanised single arm bracket of suitable length with suitable bolt and nuts with 1.5 sqmm PVC insulated SC unsheathed FRLS copper wire of 24 mtr length from junction box to the fitting. The integrated junction box with pole should be provided with 1No. 4way terminal block with Hylum sheet and 3Nos 6A SP MCB (Higher End) in suitable size door at the bottom with locking arrangements and necessary connection complete.

The pole and bracket should withstand wind speed of 180 Km/Hr. All the nut, washer and bolt should be galvanised. Testing and commissioning should be done as directed by the departmental officers.

Supply and erection of 8m free standing decorative Double Arm bracket 8 sided Octogonally continously tapered structured pole with base plate of size 300 x 300 x 12mm as per IS-875 with following specification. Bottom Pole Dia - 130mm Top Pole Dia - 70 mm Thickness of Pole - 3mm The pole should be hot dip galvanized confirming to BESN ISO- 1461 with thickness of 65 Micron. The octagonal pole shall be erected with bridge wall making M20 grade reinforced cement concreate foundation by considering the safe soil bearing capacity at suitable for site as Minimum10 T/ sqmm at 1.7 m depth including supply of steel, concrete, excavation and fixing of provided nut bolts wiht help of template duly plastered as per design complete. Supply and fixing of 2Nos 150W LED street light 2Nos 150W flood light luminaire arrangments suitable angle iron frame with (Higher End) with hot dip galvanised single arm bracket of suitable length with suitable bolt and nuts with 1.5 sqmm PVC insulated SC unsheathed FRLS copper wire of 24 mtr length from junction box to the fitting. The integrated junction box with pole should be provided with 1No. 4way terminal block with Hylum sheet and No 6A SP MCB Higher End in suitable size door at the bottom with locking arrangements and necessary connection complete. The pole and bracket should withstand wind speed of 180 Km/Hr. All the nut, washer and bolt should be galvanised. Testing and commissioning should be done as directed by the departmental officers.

Supply and fixing of WT bulk head fitting with guard suitable with 7W / 9W LED bulb

Supply and fixing of 80W LED Surround Neo (T) ECO round High bay industrial fitting of IP 66 rating (Crompton make (TIP-320-80-S7-SL-GL-NSG make / Equalent) in PDC housing with efficacy of 110lm / W with suitable special type of MS clamps with PVC unsheathed copper leads from terminals to the fittings

Supply and fixing of 150W- LED flood light fitting (Higher end) on MS angle iron frame 38x38x6mm with PVC unsheathed copper leads from terminals to the fittings.

Supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting

Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete without provision of hole in the wall.

Supply and fixing of louvers shutters arrangements for 300mm (12") sweep (light duty) AC exhaust fan.

Supply and fixing of 3 nos.6A two module 5 pin socket , 3 nos. 6A one module switch on suitable module surface mounting Box (GI ) with module cover plate (plastic) on wall with connections. Higher End

Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch on suitable module surface mounting Box (GI ) with module cover plate (plastic) on wall with connections. Higher End

Supply and fixing of 1 no.6A two module 5 pin socket , 1 no. 6A one module switch on suitable module surface mounting Box (GI ) with module cover plate (plastic) on wall with connections. Higher End

Supply and run of 2 of 4sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 4sq.mm copper wire with painting of suitable colour

Supply and fixing of 20A DP plug and socket in sheet enclosure with 32A DP MCB in flush with wall with earth connection (For AC Plug)

Supply and fixing of 32A FP MCB on wall in sheet enclosure in flush with wall with earth connection. [The MCB and metal enclosure should be Higher End.

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40A DP MCB Isolator as incoming and 6 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End

Supply and fixing of 8 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1No. 100A 4P MCB switch as incoming and 4Nos. 63A TP MCB 2Nos. 32A TP as outgoing on wall with suitable AI frame earth connection only. Higher End.

Supply and Laying of 3 1/2 x 50 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and clarnping of 3 1/2 x 50sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps.

Supply and fixing of brass cable gland for 3-1/2 x 50 sqmm. PVC armoured LTUG cable with earth connection.

Supply and providing cable end termination of 3-1/2 x 50 sqmm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete.

Supply and Laying of 2 x 10 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good

Supply and clarnping of 2 x 10Sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps.

Supply and Laying of 4 x 16 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and clamping of 4x16 sq.mm PVC armoured LTUG Alu. cable in 50mm / 38mm dia HDPE pipe on wall / post with MS clamps.

Supply and fixing of brass cable gland for 4 x 16 sq.mm. PVC armoured LTUG cable with earth connection.

Supply and fixing of 100A Three phase 500V 4Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with earth connection only.

Supply and fixing of 100A TPN switch disconnector fuse units in sheet steel enclosure with HRC fuses double break on suitable angle iron frame work with MS cable entry boxes with earth connection only.

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x50mmx6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry.

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection

Supply & erection of 200A rated dust &vermin proof cubicle panel board of size not less than 5.5'x4'x1' made out of 16SWG CRCA sheet steel with bus bar chamber, cable chambers, switching consoles with hinged doors etc. with necessary stifners on suitable angle iron frame supports with wall mounting arrangements complete with the following accessories. 1.200A TPN SDF Units interior with HRC fuses double break. (L&T/Siemens/Eq.) (incomer)-1 No. 2. 100A TPN SDF units interior with HRC fuses double break (L&T/Siemens/Eq.) - 2Nos. 3.63A TPN SDF units interior with HRC fuses double break (L&T/Siemens/Eq.) - 4Nos. 4.2''x1/4'' tinned copper sleeved insulated copper flats-3Nos for 3 phases and Neutral with epoxy molded bus supports. 5.1''x1/8'' tinned copper flats for earth bus in rear side panel -2Nos. 6.Metering console with multi function Digital panel meter with CTs. The 200A SDF unit should be connected with the bus bar by 2''x1/4'' tinned copper flats. The 100A SDF unit should be connected with the bus bar by 1''x1/8'' tinned copper plates. The 63A SDF units should be connected with the bus bar by No.8 SWG tinned copper conductor.All the SDF units should be provided with double earth connections.All the switches are separated from bus chamber & cable chamber with 3mm thick hylum sheet. All the doors should be earthed with suitable flexible copper leads.

All the doors should be provided with suitable locking arrangement with rubber beedings. The rating of panel bus bar, switches cable sizes etc. to be super scribed. A danger sticker should be affixed.The panel should be powder coated gray colour .All the relevant CEIG Specifications shall be complied with

Supply and Run of 4 of 25 sq.mm PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade on 7/20 GI wire for service connection mains.

Supply and Run of 4 of 25 sq.mm PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in 32mm dia GI pipe (class B ) suitably bent at both ends with necessary angle iron upright and end support for service connection mains.

Supply and fixng of TNEB meter board suitable for 3phase 200A service connection made up of suitable angle iron frame work of size 3feet x 2feet using angle iron of size1-1/2"x1-1/2"x1/4" rigidly fixed onwall covered with hylem sheet of size 3feet x 2feet of 12mm thickness with necessary bolts and nuts supports and supply and fixing of 3Nos.200A fuse units (500V),1No.neutral link, copper earth flat of size 1"x1/4" with inter connection of EB meter to fuse units by 19/16 PVC insulated copper wire with earth connection complete.

Supply and fixing of 3 Phase 200A aerial fuse unit for 3Nos 2-0A fuse units (500V) on suitable MS sheet covered with 6mm thick hylem sheet on suitable angle iron work the tapping pole with necessary clamps

Supply and clarnping of 3 1/2 x 150sqmm. PVC LTUG armoured cable on post or on wall with MS clamps

Supply and fixing of brass cable gland for 3 ½ x 150 sq.mm PVC LTUG armoured cable with earth connection

Supply and providing cable end termination of 3 ½ x150 sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete

supply and fixing of 1200mm (48") sweep AC ceiling fan complete ( Higher end) with 2 module 100W fan step regulator (Higher end) with 1 metre down rod on the existing fan clamp

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS ceiling copper conductor of 1100V grade in suitable on wall with PVC acecssories with Module Plastic surface PVC rigid pipe on wall and ceiling with PVC accessories with Module Plastic surface mounting switch box on wall with 6A one way module switch with module front plate with painting of Suitable colour for Open PVC Light point / fan point (for electronic regulator) (5 points / Coil) Lower End

Supply and fixing of Post top luminaire of Luker Equalent Make 4 meter pole for Post of Lantern with bottom dia 3 metre top dia x length 2"x1m with housing of 1No of 40W LED (Luker /Eq) on Post top lantern.The pole mounted on suitable concrete foundation with necessary bolts and nuts and Supply and fixing of 1no of 6A SP MCB (Higher End make) ,4way terminal block inside the built in Control box with PVC unsheathed copper leads from the terminals to the fitting.

T PAULKANNU & CO (BID ID -1435059)