REPAIRS TO JOINERY FLOORING TILING AND PLASTERING AND CONNECTED BR ITEMS FOR MD ACCN UNDER GE WELLIGTON UNDER GE WELLINGTON

Amount

Taking down chowkat or frame with shutter (without taking of shutters from the frames) area not exceeding 1.5 Sq mtr each all as specified and directed.

Taking down chowkat or frame with shutter (without taking off shutters from the frames) area exceeding 1.5 Sq mtr but not exceeding 4 Sq mtr each all as specified and directed.

Taking down Shutters of any description exceeding. 1 sqm and not exceeding 2 sqm all as specified and directed.

Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube,supplying and fixing in opening as per specification and drawing all as specified and directed.

Factory made solid panel PVC door shutter 30mm (Stile) consisting of frame made out of M.S tubes for top and bottom rails M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheets to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame all as specified and directed.

Factory made solid panel PVC Moulded Door shutters 28 to 30mm thick (style) but 2mm thick 3D wood grains moulded PVC sheet polyurethene painted on front face and 2mm prelam PVC sheet on front and back face, supplying and fixing in frame at site as per specification and drawing all as specified and directed.

Solid PVC door frame of size 50mmx47mm made out of 5mm wood grain printed PVC sheet and edges will be painted to match with printed sheet, reinforced with M.S square tube supply and fixing in opening as per specification and drawing.

2nd class hard wood (sal / Hollock) wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue, pinned at joint all as specified and as directed.

2nd class hard wood glazed and skeleton, shutter, divided into squares to receive glass, gauge etc (with sash bar) with plain chamfered or rounded, mitredand rebated sah bars, any numbers the size of member of shutter as specified in SSR Pt-I clause 8.24 (b) window and ventilaters shutters thickness 30mm and fitted to chowkat as specified and as directed.

35mm thick second class hardwood glazed and skeleton door shutters open rebated and prepared to receive glass, gauze etc, edges of framing plain, chamfered or rounded with cut and mitred beads for securing glass/gauges etc without sash bars, size of members of shutter as specified in SSR Part-I section 8, clause 8.20 (a) complete all as specified and directed.

35mm thick second class HW plain, framed, panelled shutters (any No of panels) with of veneered particle board medium density 12mm thick, complete all as specified and directed.

35 mm thick flush shutter,solid core construction, with block Board Core and plywood face panels covered with decorative Face Veneer with lipping/ frame on one faces, complete all as specified and as directed.

Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed.

Mild steel hold fast conforming to Fe-290 Gde-165 all as specified and directed.

Tarring back of chowkat, area tarred exceeding 0.10 sqm but not exceeding 0.5 sqm each all as specified and as directed.

All as per item No.15 hereinbefore but treating small articles such as hold fast etc tarred area not exceeding 0.10 sqm each all as specified and as directed.

PCC type C1, 1:3:6 using 20mm graded stone aggregate over platform, bed blocks for hold fast, coping and the like of any description, over 10mm in width and grith not otherweise described all as specified and directed.

Butt hinges, 100 mm size medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

Aluminium anodised, barrel tower bolts of extruded section 150 mm long all as specified and directed.

Aluminium handles, anodised, extruded section 100 mm long all as specified and directed.

Aluminium handles, anodised, extruded section 150 mm long all as specified and directed.

Aluminium alloy handles, fabricated type anodised, extruded section 100 mm long including fixed in repairs all as specified and directed.

Aluminium alloy handles, fabricated type anodised, extruded section 150 mm long including fixed in repairs all as specified and directed.

Floor door stopper of aluminium alloy body 150mm and tongue, anodised with hard drawn steel spring fixed in floor all as specified and directed.

Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staple all as specified and directed.

Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staple and fixed in repairs all as specified and directed.

3 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.5 sqm in each pane all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stones, concrete or brick surrounds, glazed with putty or fixed with beads sheet glass 3mm thick ordinary quality and glazing with oil putty and beads in square not exceeding 0.5 sqm in each pane all as specified and as directed.

Dismantling boarding/ ceiling board of any description fixed in any position with nails complete all as specified and directed.

Kitchen and Cupboard Shutter / cabinet care case of required sizes made out of Action Tesa HDHMR Board 18 mm thick one side decorative Lamination & other side Balancing Lamination . The 18 mm thick board shutter / cabinet care case finished at all level including all fixing hardwares and solvent as per the Manufacturers Instructions complete all as specified and directed. Note:- Work to be carried out by manufacturers authorised workers.

Shelf / Partition of Required sizes made out of Action Tesa HDHMR Board 18 mm thick one side decorative Lamination & other side Balancing Lamination consisting of panel 18 mm thick board for supporting the hold of Shelf / Partition finished at all level including all fixing hardwares and solvent as per the Manufacturers Instructions complete all as specified and directed. Note:- Work to be carried out by manufacturers authorised workers.

Stainless Steel Auto closing Hinges fixed to Cabinet Shutters complete as per Manufacturers specifications and all as specified and directed. Make : EBCO or Equivalent

100mm Stainless Steel handles rectangular shape polished bright complete all as specified and directed. Make : EBCO or Equivalent

18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination, and other side balancing white lamination fixed with screws to timber frame work all as specified and directed.

Extra over rates of block board or veneered particle board 18/19mm thick for external teak wood lipping, 6mm thick fixed with nail complete all as specified and as directed.

Continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flaps (when open) 40mm complete all as specified and directed.

Aluminium handles, anodised, extruded section 75mm long all as specified and directed.

Ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed all as specified and directed.

Fancy type decorative drapray rod 20 mm dia including side caps and brackets, as in repairs complete all as specified and directed.

Door spring ordinary rat tail rod pattern springs including roller and roller plate complete of mild steel 300mm long including fixed in repairs complete all as specified and directed.

Resecuring or easying and adjusting without taking down shutter of any description not exceeding 1 sqm each all as specified and directed.

Resecuring or easying and adjusting without taking down shutter of any description exceeding 1 sqm and not exceeding 2 sqm each all as specified and directed.

Door closer hydraulically regulated, aluminium extruded section body designation No.1 universal type sutable for door shutters up to 700mm in width and of weight not more than 35Kg and fixed in repairs all as specified and directed.

Powder coated Anodised Aluminium frame for doors windows, ventilators, U channels, safety grill with one or more rebats including jointing cleat for fixing, complete all as specified and directed

Demolition of cement concreteunreinforced in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) all as specified and directed.

Cement concrete type B-0, 1:2:4 using 12.5mm graded stone aggregate, 25mm thick PCC floor all as specified and directed.

Screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes, complete all as specified and directed.

Vitrified Ceramic Tile 10mm thick light shade (Square/Rectangular) polished area of each tile not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement slurry to match over all as specified and as directed.

Vitrified Ceramic Tiles 10mm thick dark shade (Square/Rectangular) polished area of each tile not exceeding 0.36 sqm as in skirting/ dadoo etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick screed bed or bedding layer of mortar in cement mortar 1:4 complete all as specified and as directed.

Dismantling, floor hearth or wall tiling including cement mortar bedding complete all as specified and as directed.

Coloured Glazed ceramic tiles in vertical surfaces 450x350x7mm/ 300x600x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick plaster in cement mortar 1:4 on fair face of brick or concrete surface

Existing steel rolling shutters , ball bearing, spring including Top Cover, anchoring rod, hasp and staple, erected in position as indicated complete push pull or manual type and rewelding , rops, stoppers, Oiling , greasing , easying etc including necessary replacement of profile, if required grid channel complete including fixed in repairs all as specified and as directed

GMS Builders

Sree Constructions

sree devi construction

S.RAMACHANDRAN

K.AYYAPPAN

KRA Engineering and Construction