AR to Psychiatric Wing Mental Ward in PGIMS Rohtak for the year of 2024 25

Amount

Distempering with 1st quality acrylic distemper (Ready mix) having voe content less than 50 grams/ litre of approved brand and manufacture to give an even shade:Old work (one or more coats) (HSR 30.25.1) (Labour Rate)

Regarding terracing of mud phaska covered with tiles or brick, in cement mortar by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud phaska to proper slope, relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 (1 cement : 3 fine sand), including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded), all complete as per direction of Engineer-in-Charge.(HSR 30.9)

Providing and laying of 40 mm thick marble chips flooring rubbed and polished to granolithic finish, under layer 34 mm thick cement concrete 1 :2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) and top layer 6mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 1 mm to 4 mm nominal size, laid in cement marble powder mix 3: 1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 marble chips) by volume, including cement slurry etc. complete, Dark shade pigment with ordinary cement (HSR 10.19.1)

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1 :3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.(HSR 10.58)

12 mm cement plaster of mix 1:6 (1 cement: 6 fine sand) (HSR 11.5.4)

1O mm thick cement plaster 1 :3 (1 cement: 3 fine sand) (HSR 11.4.2)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade,One or more coats on old work (HSR 30.28.1) (Labour Rate)

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, One or more coats on old work (HSR 30.27.1) (Labour Rate)

Finishing walls with Acrylic Smooth exterior paint of required shade, Old work (Two or more coat applied @ 1.67 litre/ 10 sqm) on existing cement paint surface (HSR 30.37.1) (Labour Rate)

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:Float glass panes of nominal thickness 4mm (weight not less than 1Okg/sqm) (HSR 30.54.1)

The New Phougat Co-op L&C Society Ltd.

The Lord Vishwakarma Co-Operative L&C Society Ltd.