PROVISION OF HARD STANDING IN TRAINING AREA AT JAK LI REGT CENTRE, SRINAGAR UNDER GE 970 EWS

Amount

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in soft and loose soil complete all as specified and as directed.

M&L Hardcore of broken stone or boulders of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rolled/rammed to a true surface complete all as specified and directed.

M&L 100 mm thick PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in sub base finishing even and rough complete all as specified and as directed.

M&L 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in level course with finishing in cement concrete surface even and rough to receive screed bed complete all as specified and as directed.

M&L external premium paving tiles of techno commercial or equivalent of size 40cm x 40cm x 10 mm thick, set, jointed and pointed in neat cement slurry in floors, laid over and including15mm thick bedding layer in Cement Mortar 1:6 complete all as specified and as directed.

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m in depth for foundation etc or for manholes, cesspits, shafts etc not exceeding 10sqm on plan and getting out in any type of soil complete all as specified and directed.

M&L PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.

M&L brick work with sub class `B’ bricks, straight on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

Returning filling, in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.

Removing surplus excavated soils to a distance exc 250m but not exceeding 500m and depositing where directed at a level not exceeding 1.5m above the starting point, complete all as specified and directed.

M&L PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone agregate) as in copings, benching including necessary formwork complete all as specified and as directed.

Excavating in post holes (or similar holes) each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface in any type of soil, complete all as specified and directed.

S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, fordoors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

S&F 2mm thick Fibre glass reinforced translucent plain sheeting fixed with coach screw and washers in roof, wall etc complete all as specified and as directed.

M&L Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.

M&L for two coats of synthetic enamel painting over a coat of red oxide zinc chrome primer on new steel surfaces over 10cm width or girth including preparation of surface, complete all as specified and directed.

M&L for 15mm thick cement plaster in CM (1:4) on fair faces of brick or concrete surfaces finishing the surface even and smooth (without using extra cement) etc. complete all as specified and directed. .

M&L for preparation of newly plastered surfaces of wall, applying a layer of wall care putty 1mm thick (averaging), material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

FIRDOUS AHMAD BABA (BID ID -3273198)

PARVAIZ AHMAD WANI (BID ID -3276183)

M/S BASHIR AND SONS (BID ID -3272050)

MEGA CONCRETE CONSTRUCTION ENGINEERS AND CONTRACTORS (BID ID -3275240)

M/S GHULAM HASSAN KUCHAY (BID ID -3269690)

M/S MIR SAJAD ENTERPRISES (BID ID -3271976)

M/S SHEIKH FEROOZ AHMAD (BID ID -3273686)

M/S HAFIZ AND SONS (BID ID -3273727)