Provn of waiting shed for transients and hard standing at Grn A Khanabal of AGE P under GE 861 EWS

Amount

Excavation in trenches n exc 1.50m wide and n exc 1.50m in depth for foundation etc or for shaft wells, cesspits manholes pier holes etc nexc 10 sqm on plan and n exc 1.5m in depth and getting out in any type of soil complete all as specified and directed.

Surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil, complete all as specified and directed.

Surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil, complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n exc 25cm in depth complete all as specified and directed.

Removing excavated material n exc 50 m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed.

M&L RCC M-25 design mix using 20 mm graded stone aggregate in foundations, including rafts, footings, foundation beams, plinth beams, base for columns, etc basements slabs under rammed piles and mass concrete complete all as specified and directed.

M&L Form work to sides of concrete foundations, footings, bases of columns, raft beams sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter complete all as specified and directed.

M & L for precast cement concrete block masonry , type B-1 (1:3:6) 20mm graded aggregate,with hollow blocks exc 10cm in width set in CM 1:6, complete all as specified as directed by Engr-in- Charge

M & L for MS TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to complete all as specified and directed.

M&L TMT bars 5mm and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending spirally for hoping for columns and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, all as specified.

M&L PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified.

M&L PCC 1:3:6 type C-2 (40 mm graded aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M&L 75mm thick PCC 1:3:6 Type C-2 (40 mm graded stone aggregate) as in sub-floor, sub-base, floor and pavings, etc. complete all as specified and directed

M&L 25 mm thick PCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregates), as in flooring complete all as specified and directed.

M&L Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S. 1161- 1979 grade St.-240, complete all as specified and directed.

S&F Roof trusses Fe 410-W(Gde-E- 250) quality-A (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel, or flat sec) incl distance pieces cleats etc complete all as specified and directed.

M&L 2nd class soft wood plain fillets square/rectangular or triangular in section of sectional area exc 13 Sqcm but n exc 25 Sqcm complete all as specified and directed.

M&L 2nd class soft wood plain fillets bull nosed, splayed, chamfered or rounded on edge or face in section of sectional area exc 3 Sqcm but n exc 6 Sqcm complete all as specified and directed.

M&L 2nd class soft wood plain fillets bull nosed, splayed, chamfered or rounded on edge or face in section of sectional area exc 3 Sqcm complete all as specified and directed.

M&L 6 mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face, fixed in ceiling flat and sloping with nails to timber frame complete all as specified and directed

M&L preparation of new or previously untreated steel surface any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L Hard core of broken stone boulders of gauge n exc 63 mm, deposited spread and leveled in layers n exc 15 cm thick, watered and rammed to true surface complete all as specified and directed.

M&L for walling of random rubble uncoursed , well bounded , bedded and solidly hearted built in CM 1:6 complete all as specified and directed.

M&L Rendering 10 mm thick in cement plaster 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed

M&L Rendering 15 mm thick in cement plaster 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed

M&L preparation of new plaster surface of walls and applying two coat of cement base paint over a coat of alkali resistance primer complete all as specified and directed.

M&L preparation of newly plaster surface and applying two coat of distemper oil emulsion white tinted over a coat of primer complete all as specified and directed by Engr -in - charge.

M&L for preparing surfaces of chowkhats new or old of any description treating ends of posts,backs of chowkats,etc.,area tarred exceeding 0.1sq.m but not exceeding 0.5sq.m each complete all as specified and directed.

S&F350x250x7mm/ 450x350x7mm size coloured glazed wall tiles set and jointed in neat cement slurry and pointed with cloured cement to match as in vertical surface including 10 mm thick rendering in CM 1:4 on vertical surface to receive wall finishes complete all as specified and directed.

S&F Non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles over 15mm thick screed bed or bedding layer in CM 1:6 for laying finishes,complete all as specified as directed by Engr-in- Charge and approved by GE.

S&F 2nd class soft wood (Kail) in scantling clean sawn and fixed complete all as specified and directed

S&F Aluminium powder coated door shutter side hung type on pivots alongwith hydraulic door closer with style rails ( Top, bottom & lock rail) top rails meeting style, lock rail size 48x44mm, top & bottom rail size 108x44mm, frame for chowkats size 40x63mm including door lock , handles including 5mm thick plain glass in top and 12mm thick prelaminated particle baord (both side laminated) in bottom panel including necessary jointing cleat, glazing clips, rubber packing, snap beading, screws of suitable size etc (thickness of aluminium section shall not be less than 1.5mm), complete all as specified and directed.

S&F three track aluminium sliding window with two or more shutter with 4mm thick tinted glass plain/black and one shutter using aluminium wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc using following aluminium powder coated section conforming to size for frame 95mmx45mm, trak size 92mmx32mm, shutter section 43mmx18mm (thickness of aluminium section shall not be less than 1.5mm), complete all as specified and directed.

S&F Aluminium partition powder coated aluminium tube of section 114mmx44.5mmx1.5mm thick at bottom and remaining horizontal and vertical section 44.5mmx45mmx2mm thick aluminium clip ,rubber beading aluminium nut and bolts etc including 5mm thick plain glass and 12mm thick prelaminated particle board (both side laminated)spacing of glazed aluminium tube in horizontal 75cm max and vertical 90cm max complete all as specified and directed.

Rolling & consolidating over hard core surface with 8 to 12 tonne power roller n exc 150mm compacted thickness, complete all as specified and directed.

M&L PCC 1:3:6 type C-2(40mm gardded aggregate) as in copings including necessary form work complete all as specified and directed.

M&L coloured Machine pressed precast concrete interlocking paver block with grey cement and pigment, any shape, size and design as approved by Engr-in charge confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade, laid over and including 50mm thick sand cushion and compacted with mechanical vibrator, all as specified.

JANDOO AND CO.

M/S M.S. BUILDERS

M/S GH MOHAMMAD DAR

BHAT CONSTRUCTIONS AND BUILFERS

M/S ASHAQ CONSTRUCTION

G N Constructions

M/S RASHID CONSTRUCTION

M/S SHAH RAOUF

M/S MOHD SHABAN SHEIKH