82422 PROVN OF UPS STORAGE ROOM, PARKING SHED, MT GARAGE, STAINLESS STEEL CONCERTINA COIL AND CHANGE IN COLOUR SCHEME OF BLDG XXXIII UNDER AGE (I) NAVY CHENNAI

Amount

SCHEDULE "A" PART-I (B/R Portion) Taking down cement plaster, any description on brick or stone walls including ceilings etc., including racking out joints, hacking for key scrubbing down with water complete all as specified and directed.

Material and labour for 15 mm thick rendering in two layers, base layer 10 mm thick in cement mortar (1:6) on other than fair faces of brick wall surfaces as in dubbing coat and followed by 5 mm thick in cement mortar (1:4) mixed with and including water proofing compound @ 3 % by weight of cement as in finish coat, finished even and fair without using extra cement all as specified and as directed.

Supply only integral water proofing compound complete all as specified and as directed.

Material and labour for 10 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar (1:6), finished even and smooth without using extra cement, complete all as specified and as directed.

Material and labour for 10 mm thick rendering in CM (1:3) on ceiling on soffits complete all as specified and as directed.

Material and labour for preparation of newly plastered surfaces of ceiling and applying three coats of white wash all as specified and as directed.

Material and labour for preparation of old treated surfaces of walls and applying one coat of oil emulsion distemper complete all as specified and as directed.

All as per Sl item No. 06 here-in-before but on walls

Complete removal of existing treatment from wall surfaces complete all as specified and directed.

Material and labour for preparation of wall surfaces whose existing treatment has been removed and applying 2-3 mm thick interior wall care putty, complete all as specified and directed.

Material and labour for preparation of newly putty finished surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant priming paint complete all as specified and as directed.

Material and labour for preparation of wall surfaces of wall surfaces whose existing treatment has been removed and applying two coats of exterior weather proof emulsion paint over a coat of primer complete all as specified and as directed.

Material and labour for preparation of old painted wooden surfaces and applying one coat of varnishing/french polish complete all as specified and as directed.

Material and labour for preparation of old painted wooden surfaces of any description exceeding 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed.

Material and labour for preparation of old painted steel surfaces of any description exceeding 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed.

Material and labour for repair of broken/ rusted RCC work such as fascia of roof slab, ceiling, chajjas, columns, beams etc…upto required thickness with ready mix reinforced acrylic fiber cementatious mortar material ( micro concrete) after cleaning and removing loose particles, grease, oil or other materials, applying epoxy zinc primer over cleaned reinforcement steel and providing a steel reinforcement cage with fiber mesh all as per manufactures instructions including finishing the surface fair and smooth, for buildings upto (G+4) Stories, complete all as specified and directed by Enginner in charge. Make: M/s Dr. FIXIT, Fosroc or equivalent as approved by AGE(I)

Taking down chowkats or frames exceeding. 1.5 Sqms but not exceeding 4.00 Sqms (without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkats or frames not exceeding. 1.5 Sqm (without taking off shutters from the frame) complete all as specified and directed.

Supply and fixing anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc...complete all as specified and as directed.

Supply and fix powder coated (Minimum thickness of powder coating 50 micron) anodised aluminium door shutters, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handle 02 Nos. in each door, necessary hinges, anodised aluminium snap beading, screws etc... complete all as specified and as directed. (Note: Glass shall be measured and paid separately)

Supply and fix powder coated ( Minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters, side hung type without sash bar, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws and anodised aluminium fittings such as peg stays 150mm long (1 No), hinges type B-21 100 mm long (2 Nos), suitable handle (1 No) complete all as specified and as directed. (Note: Glass shall be measured and paid separately)

Supply and fixing sheet glass 5.5 mm thick, ordinary quality, in squares not exceeding 0.5 sqm in each pane fixed with necessary aluminium beads complete all as specified and as directed.

Supply and fixing sheet glass 5.5 mm thick, ordinary quality, in squares exceeding 0.5 sqm in each pane fixed with necessary aluminium beads complete all as specified and as directed.

Supply and fix 18/19mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, including 6 mm teak wood lipping fixed with screws to timber frame work all as specified and as directed.

Description all as per Sl item No. 24 here-in-before but fixed in repairs

Supply and fix 18/19mm thick Prelaminated particle board, interior grade, prelaminated with both side decorative choice lamination, including 6 mm teak wood lipping fixed with screws to timber frame work all as specified and as directed.

Description all as per Sl item No. 26 here-in-before but fixed in repairs

Supply and fix aluminum anodized powder coated grill DG 916 of 10 mm dia rod, square, rectangular, circular or similar type of shape, aperture, 10 mm width and 5.2 mm thick, fixed with `H’ or `F’ channel 38 mm x 12 mm x 1.30 mm, aluminium frame with grill shall be powder coated not less than 50 micron, complete all as specified and as directed. Make: DECOGRILLE or equivalent as approved by AGE (I)

Supply and fix mortice locks, vertical type, brass, 4 lever, size 100 mm including 02 keys, complete all as specified and as directed.

Supply and fix door closer hydraulically regulated designation No 3 universal type, aluminium (die cast) body suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed all as specified and as directed.

Description all as per Sl item No. 30 here-in-before but fixed in repairs

Dismantling wall and ceiling boards (fibre, pulp, insulation etc...) or insulation boards/slabs/blanket, any thickness, including cover fillets complete all as specified and directed.

Material and labour for anodised aluminium snap grid frame work for false cileing, size of grid 605 x 605 mm, complete all as specified and directed.

Material and labour for Hangers 6 mm dia G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size, 60mm long and expansion hold fasteners 12.5 mm dia, 40mm long complete all as specified and as directed.

Supply and fix Gypsum board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and as directed.

Surface excavation not exceeding 30 cm deep and averaging 15 cms and getting out in hard/ dense soil complete all as specified and directed.

Excavation in trenches, not exceeding 1.5 meter wide and not exceeding 1.5 meter depth for foundation, etc.. or for shafts, well, cesspits, manholes, pier holes etc not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and getting out in hard/ dense soil complete all as specified and as directed..

Material and labour for cement concrete (1:4:8) type D2 using 40mm graded stone aggregate, as in foundations, filling and mass concrete all as specified and as directed.

Material and labour for formwork to sides of concreate foundations, footings, bases of columns, raft and raft beams sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter in flat with rough finished surfaces complete all as specified and as directed.

Material and labour for formwork to sides of pillars, posts struts, piers, columns and stanchions in circular on plan for rough finished surface complete all as specified and as directed.

Material and labour for RCC M-25 (20 mm graded stone aggregate) as in foundations, including rafts, footing, foundation beams complete all as specified and as directed.

Material and labour for Brickwork with fly ash brick, modular type, straight or curved on plan exceeding 6 meter mean radius, built in CM (1:6), complete all as specified and directed. .

Description all as per Sl item No. 42 here-in-before but in cement mortar (1:4)

Material and labour for RCC M-25 (20 mm graded stone aggregate) as in beams, cantilevers , lintels over 1.5 mtr span complete all as specified and as directed.

Material and labour for RCC M-25 (20 mm graded stone aggregate) as in chajjas complete all as specified and as directed.

Material and labour for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick, complete all as specified and as directed.

Material and labour for formwork to sides and soffits of floor or roof beams, cantilevers, shelves etc., including supports, finished rough with flat surface, complete all as specified and as directed.

Material and labour for formwork to sides of chajjas in rough finished surface of concrete complete all as specified and as directed.

Material and labour for formwork to edges of concrete flats, treads, breaks in floors, window cills, not exceeding 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exceeding 10 cm but not exceeding 20 cm wide in rough finished surfaces of concrete complete all as specified and as directed.

Material and labour for 10 mm thick rendering on concrete surfaces in cement mortar (1:4) mixed with water proofing compound at 3% by weight of mix, surface finished even and fair without using extra cement to receive water proofing treatment, complete all as specified and as directed. Note: WPC to be measured and paid seperately.

Supply and laying the APP polymeric water proofing membrane of weight not less than 3.5 kg/sqm , minimum 3 mm thick, reinforced with non-woven polyester fabric (wt not less than 160 gms/ sqm) with a thermo fusible finish laid over 1.2 kg/sqm bitumen grade 85/25 over compatible bitumen primer at the rate of 0.40 ltrs/Sqm, torching overlaps with gas flame torch application with a overlap of 75 mm at the sides and 100 mm at the ends and sealing including applying a thick coat of bituminous aluminium paint over the membrane, complete all as per manufacturers instructions and as specified and directed.

Material and labour for high strength deformed TMT bars 10mm dia and over as in reinforcement bars, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Description all as per Sl item No 52 here-in-before but with 6 to 8 mm dia bars

Material and labour for high strength deformed TMT bars of 5mm dia and over upto and including10 mm in stirrups and spacers, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Material and labour for RCC M-25 (20 mm graded stone aggregate) as in columns, pillars and piers complete all as specified and as directed.

Material and labour for RCC M-25 (20 mm graded stone aggregate) as in roof slabs, landings, beams and balconies complete all as specified and as directed.

Material and labour for providing 75 mm thick plain cement concrete (1:4:8) type D2, using 40mm graded stone aggregate as in sub base of flooring/hard standing/pavings etc...finished even and fair without using extra cement to receive finishing layer, complete all as specified and as directed.

Material and labour for providing 40 mm thick plain cement concrete (1:2:4) type B1, using 20mm graded stone aggregate as in finished surface of flooring, surface finished with spike rolling or making impressions of expanded metal, whilst the concrete is green complete without using extra cement all as specified and as directed.

Material and labour for 15 mm thick screed bed or bedding layer for laying floor finished in CM (1:6) complete all as specified and as directed.

Material and labour for hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface using broken stone or aggregates all as specified and as directed.

Material and labour for providing 75 mm thick plain cement concrete (1:3:6) type C2, using 40mm graded stone aggregate as in plinth protection, surface finished even and smooth without using extra cement, including providing contraction joints 12 mm wide and 50 mm deep at 3 meter centre to centre and at corners, filled with mastic filling of Bitumen 85/25 and sand in ration 1:2, complete all as specified and as directed.

Material and labour for coloured joint free non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.06 Sqm and not exceeding 0.11 Sqm in floors etc..., set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles including screed bed 15 mm thick in cement mortar (1:4) complete all as specified and as directed.

Material and labour for 350 x 250 x 7mm thick/ 450 x 350 x 7 mm thick coloured glazed ceramic tiles on vertical surfaces such as skirting, dados etc... set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile over and including 10 mm thick backing coat in cement mortar (1:3) all as specified and as directed.

Supply and fix second class hard wood palin, solid, straight chowhats and framed, wrought, framed rebated on the solid, rounded or chemfered, put together with glue pinned at joints etc... complete all as specified and as directed.

Supply and fix 40 mm thick plain, framed, panelled shuttters of 2nd class hard hardwood (any number of panels) with panels of timber flat on both sides (feather edged), or of veneered particle board medium density of thickness 35mm, complete all as specified and as directed.

Supply and fix glazed or skeleton shutters, 30 mm thick, in 2nd class hard wood, open rebated and prepared to recieve glass, gauze etc.., (without sash bars) chamfered or rounded, fitted with cut and mitred beads for securing glass etc..., sizes of members of shutters as specified in SSR Part I, Sec 8, clause 8.20 (a) all as per specified and as directed.

Supply and fix 150 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as per specified and as directed.

Supply and fix 125 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as per specified and as directed.

Supply and fix in repair aluminium alloy, anodised sliding door bolts with hasp, staple and fixing bolts, of extruded section or cast or aluminium alloy and length of bolt 300 mm complete all as specified and as directed.

Supply and fix butt hinges,cold rold mild steel, 100 mm long, heavy weight, complete all as specified and directed.

Supply and fix butt hinges,cold rold mild steel, 75 mm long, heavy weight, complete all as specified and directed.

Supply and fix extruded aluminium handles, fabricated type, anodised 150 mm long complete all as specified and as directed.

Supply and fix extruded aluminium handles, fabricated type, anodised 125 mm long complete all as specified and as directed.

Supply and fix mild steel flat iron, angles, etc.. as in bands, straps, supports, stays, hold fasts including bolts if required, and similar articles confirming to Fe-290 Grade E-165, complete all as specified and as directed.

Supply and fix MS window guard bars complete all as specified and as directed.

Supply and fixing sheet glass 3 mm thick, ordinary quality, in squares, not exceeding 0.5 sqm in each pane complete all as specified and as directed.

Material and labour for preparation of new wooden surfaces of any description exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed.

Material and labour for preparation of new steel surfaces of any description, exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed.

Material and labour for treating ATT at the bottom and sides of excavation at the rate of 5 ltr of emulsion per sqm of surface area all as specified and as directed.

Material and labour for treating ATT at the top surfaces of filled earth at the rate of 5 ltr of emulsion per sqm of surface area all as specified and as directed.

Material and labour for treating ATT for the soil under plinth protection at the rate of 5 ltr of emulsion per sqm of surface area all as specified and as directed.

Material and labour for 15 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar (1:4), finished even and smooth without using extra cement, complete all as specified and as directed.

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm obtained from excavation complete all as specified and as directed.

Removing excavated spoil to a distance exceeding 1.50 km and not exceeding 5 km and depositing where directed at level not exceeding 1.50 metre above the starting point complete all as specified and as directed.

Material and labour for machine pressed precast concrete interlocking paver blocks, any shape and size, 60 mm thick, M-35 grade confirming to IS-15658-2006, with grey cement and pigment, over and including 50 mm thick river sand/ M-sand cushioning complete all as specified and directed.

Material and labour for providing plain cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in mud stops, chamfered or rounded on edges, complete all as specified and as directed.

Surface excavation not exceeding 30 cm deep and averaging 15 cms and getting out in any type of soil complete all as specified and directed.

Excavation post holes (or similar holes) each not exceeding 0.5 Cum, gettting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm including watering and removing surplus soil to a distance not exceeding 50 meters and making good to surface in hard/dense soil all as specified and as directed.

Material and labour for providing 100 mm thick plain cement concrete (1:2:4) type B-2 using 40 mm graded stone aggregate, as in hardstanding concrete, including necessary formwork and finishing the concrete road/ pavement surface even and smooth without using extra cement and finally by brooming, complete all as specified and as directed. (Note: Hardstanding concrete to be laid in alternate panels as directed by AGE (I))

Forming construction joints 30 mm x 10mm wide filled with sealing compound, Grade A, complete all as specified and as directed.

Supply and fix rolled sections as in main columns or cross beams, rafters, purlins etc.. of specified angular/ tubular sections, fixed with angle cleats or connecting plates confirming to Fe - 410W (Gde E-250) quality B, complete all as specified and directed.

Supply and fix Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick as per approved profile, of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) including removing in debrish outside MD land complete all as specified and as directed.

Material and labour for providing plain cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in foundation, filling, mass concrete etc... complete all as specified and as directed.

Material and labour for brick work built in cement mortar (1:6) using sub class "B" bricks, straight or curved on plan exceeding 6 mtrs mean radius all as specified and as directed.

Material and labour for preparation of newly plastered surfaces of wall and applying three coats of white wash all as specified and as directed.

Material and labour for providing 100 mm thick plain cement concrete (1:2:4) type B2, using 40mm graded stone aggregate as in finished surface of flooring/path/hardstanding, surface finished with spike rolling or making impressions of expanded metal, whilst the concrete is green complete all as specified and as directed.

Material and labour for providing precast cement concrete louvers and jallies, 25 mm thick ( measured solid) including all mouldings but excluding frames, Type B-0 (1:2:4) using 12.5 mm graded aggregates and set in CM (1:4), complete all as specified and as directed.

Material and labour for 15 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar (1:6), finished even and smooth without using extra cement, complete all as specified and as directed.

Material and labour for framed work such as grill, gratings etc... with ends of bars shouldered and/or riveted or forget into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, famework of water tanks and for portions framed and hung as gates, including pintel hinges, stops hand made sliding bolts etc... and similar work, including necessary welding works and including for ornamental and intricate design as approved by AGE (I), steel conforming to Fe 410-0 or Fe 310-0 complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not specifically provided for including removing in debrish outside MD land complete all as specified and as directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work and pre cast concrete articles complete all as specified and directed.

Supply and fixing framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, steel conforming to Fe 290.Gde-E-165 , complete all as specified and directed.

Material and labour for plain cement concrete (1:2:4) type B1, using 20mm graded stone aggregate as in bed blocks and lintels upto 1.50 mtr clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing cources, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary form work complete all as specified and as directed.

Material and labour for preparation of new steel surfaces of any description exceeding 10 cm width or girth and applying two coats aluminium paint over a coat of aluminium primer complete all as specified and as directed.

Supply and fixing 2 stranded, stainless steel 304 grade barbed wire 2.24mm dia , barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of stranded rails, straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc... inclduing necessary arrangements to bind with steel frame, complete all as specified and directed. Note : Each line of barbed wire to be measured seperately

Supply and fixing Stainless steel concertina coil, punched type coil, SS 304 grade of 600 mm dia, stretchable to 6 mtr long cover area with 50 Nos of spiral turns/loops, made out of SS-304, 2.50mm thick hard coil (+ or - 0.05mm) having blade of SS-304 size 0.50mm thick (+ or - 0.05mm) 22 mm long and clips made of SS-304 grade and including necessary arrangements to bind with steel frame and barbed wire as per manufacturers instrcutions, complete all as specified and directed.

Material and labour for 15 mm thick rendering on other than fair faces of brick work or concrete surfaces in cement mortar (1:4), finished even and smooth without using extra cement, complete all as specified and as directed.

SCHEDULE "A" PART-II (INTERNAL ELECTRIFICATION) Material and labour for point wiring with 1.5sqmm (Nominal area) unsheathed mullti-stranded copper conductor PVC insulated FRLS cable 1100 volts grade single core drawn into and including non-metallic rigid PVC conduit of 20mm dia, concealed wiring, along with 1.5 sqmm unsheathed multi stranded copper conductor cable PVC insulated 1100 volts grade as earth contituity conductor connected to common earth dolly fixed to wall/ceiling/roof with and including 2 mm thick MS sheet fabricated terminal boxes flush mounted for mounting the switches, sockets, fan regulator etc... as required with 3 mm thick laminated hylum sheet top cover fixed with cadmium plated iron screws, complete all as specified and directed for:-

One light point controlled by one switch

One fan point controlled by one regulator/switch

One 3 pin socket outlet 15 amps socket on independent board with 4 sqmm PVC wire

Material and labour for point wiring with 2.5 sqmm (Nominal area) unsheathed mullti-stranded copper conductor PVC insulated cable 1100 volts grade single core drawn into and including non-metallic rigid PVC conduit of 20mm dia, concealed wiring, along with 2.5 sqmm unsheathed multi stranded copper conductor cable PVC insulated 1100 volts grade as earth contituity conductor connected to common earth dolly fixed to wall/ceiling/roof with and including 2 mm thick MS sheet fabricated terminal boxes flush mounted for mounting the switches, sockets, fan regulator etc... as required with 3 mm thick laminated hylum sheet top cover fixed with cadmium plated iron screws, complete all as specified and directed

Note for Sl item No. 110 & 111: (i) The earth wire for the points in the same circuit can be looped from point to point. (ii) Earth wire shall be taken inside the conduit (iii) Cost of terminal box is deemed to be included in the item rate quoted for point wiring.

Sub main wiring with four runs of single core 10 sqmm PVC insulated, unsheathed multistranded copper conductor 1100 volts FRLS cable and two runs of 10 sqmm single core PVC insulated unsheathed multistranded copper conductor 1100 volts FRLS cable as earth continuity conductor and one run of suitable size non metallic rigid PVC conduit not less than 25 mm dia including conduit accessories fixed to wall/roof/floor etc... complete all as specified and as directed. Note : (i) Four runs of main cable , two runs of earth continuity conductor cable and one run of PVC conduit will be measured as one unit for payment purpose.

Supply and fix switch modular 5/6 amps, one way, flush type complete all as specified and as directed.

Supply and fix ceiling rose, 3 phase PVC polycarbonate, 65 x 35 mm, isolated body, complete all as specified and directed.

Supply and fix Modular white cover plate with frame 3 module complete all as specified and as directed.

Supply and fix Modular white cover plate with frame 4 module complete all as specified and as directed.

Supply and fix Modular metal flush box 3 module complete all as specified and as directed.

Supply and fix Modular metal flush box 4 module complete all as specified and as directed.

Supply and fix MCB DB TPN 4 ways complete in SS enclosure, vertical double door type complete all as specified and directed. MAKE: L&T/ Legrand/ ABB/ Siemens/ Schneider

Supply and fix MCCB 4 Pole, 415 Volts, 160 amps with 36 KA breaking capacity including fixing in DB complete all as specified and directed. MAKE: L&T/ Legrand/ ABB/ Siemens/ Schneider

Supply and fix MCB DB SPN 4 ways complete in SS enclosure, vertical double door type,complete all as specified and directed. MAKE: L&T/ Legrand/ ABB/ Siemens/ Schneider

Supply and fix MCB TP, 415 Volts, 32 amps with 10 KA breaking capacity including fixing in DB, complete all as specified and directed. MAKE: L&T/ Legrand/ ABB/ Siemens/ Schneider

Supply and fix MCB SPN 230 Volts, 25 -40 amps with 10 KA breaking capacity including fixing in DB complete all as specified and directed. MAKE: L&T/ Legrand/ ABB/ Siemens/ Schneider

Supply and fix MCB SP 230 Volts, 5 -32 amps with 10 KA breaking capacity including fixing in DB complete all as specified and directed. MAKE: L&T/ Legrand/ ABB/ Siemens/ Schneider

Supply and fix MCB TPN, 415 Volts, 40/63 amps with 10 KA breaking capacity including fixing in DB complete all as specified and directed. MAKE: L&T/ Legrand/ ABB/ Siemens/ Schneider

Supply and fix single pole and neutral enclosure with a two pin and earth plug and socket complete with one MCB SP 20 Amps, all as specified and directed. MAKE: L&T/ Legrand/ ABB/ Siemens/ Schneider

Supply and fix MCB DB SPN, 8 Way, with Acrylic windows, 240 Volts with 200 Amps rated Bus bar for housing MCB complete all as specified and directed. MAKE: L&T/ Legrand/ ABB/ Siemens/ Schneider

Supply and fix switch socket combination 2 in 1, 3 pin, 5 and 15 Amps, flush type, universal, complete all as specified and directed.

Supply and fix LED light fitting 1 x 20 W (4 feet) with indoor decorative PVC extruded T5 batten integrated LED driver etc... complete with all accesories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size, complete all as specified and directed. Make : C&S Electric Cat Part No. LTTB4F20WLED/W or equivalent in Philips/ Wipro/ Bajaj/Surya/Crompton Greaves/Eveready as approved by AGE (I)

Supply and fix, exhaust fan, 5 star rated, single phase, heavy duty, 230/240V of size 380 mm sweep with blade,1400 RPM, double ball bearing, continuous rated along with GI louvers for protection when not in use, silent operation, rust proof body and blades, MS grate for rodent protection with fixing arrangements and connecting up including provision of three core flexible PVC cable with stranded copper conductor of size 1.5 sq mm from ceiling rose to connector of exhaust fan complete all as specified and directed. Note: The rate quoted is deemed to include for cutting holes in PCC or through brick walls of appropriate diua, making niche for fixing exhaust fan, civil works for making good to existing surface as per existing and 04 Nos. nuts and bolts for fixing the exhaust fan. Make: Almonard/Crompton/Khaitan/Usha/Bajaj as approved by AGE (I)

Supply and fix single pole neutral enclosure with a two pin and earth plug and socket complete with one single MCB, 240 V, 20 Amps complete all as specified and directed. MAKE: L&T/ Legrand/ ABB/ Siemens/ Schneider

Supply and install hi wall split Air conditioner of 2.00 TR capacity with indoor and outdoor units (copper condenser coil, copper cooling coil including required length of copper tubing and cables for connecting indoor and outdoor units ) complete with cordless remote control unit and with in-built air ioniser and plasma filter, BEE 5 star rating, year of manufacturing 2020 complete all as specified and as directed. Make : Carrier/ Voltas/Bluestar/Daikin/Hitachi

Note for Sl item No. 132.00: Rate quoted is inclusive of the following:- (i) Drain pipe UPVC with insulation from indoor unit (at any floor) to ground floor level and is to be fixed with necessary clamps complete. (ii) Copper pipe 3.00 Mtr long

Supply and fix voltage stabilizer for automatic operation, single phase naturally air cooled indoor type and designed for input variation between 130 V to 300 V and output voltage stabilixed at 230 V with accuracy of + 2.5% and of capacity 5.0 KVA complete all as specified and directed. Make: Automatic Electric/ Vinitec/Aplab/V-Guard/ Vintek Electronics(Volina)

SCHEDULE "A" PART-III (EXTERNAL ELECTRIFICATION) Material and labour for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below GL) with top edge of earth plate not less than 1.5 Mtr below normal ground level, earth plate surrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using galvanized iron strip 32 x 6 mm as earthing lead connected by means of bolts, nuts, check nuts and washer of galvanized iron or steel, provision of 40 mm dia GI pipe light grade for protection of GI strip upto 7.5 meter long and 20mm dia GI pipe medium grade for watering arrangement and PCC (1:3:6) , type C1 chamber, GI funnel, wire gauge, 50 mm thick RCC 1:2:4, type B1 earth pit cover with 6 Nos, 8 mm dia high strength deformed steel TMT bars on both ways including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to distance not exceeding 50 metre, provision of charcoal and salt complete all, lifting handle, GI funnel, wiremesh, lugs etc.. as shown in electrical plate No 3 of SSR Part-I (2009) complete all as specified and directed.

Excavation in trenches not exceeding 1.5 meter wide and not exceeding 1.5 meter depth and getting out in any type of soil for laying cable/ GI Pipes/ Poles complete all as specified and as directed.

Excavation in trenches exceeding 1.5 meter wide and not exceeding 3.0 meter depth and getting out in hard/dense soil for pole foundation complete all as specified and as directed.

Removing excavated soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point, complete all as specified and as directed.

Material and labour for sand filling in trenches including spreading in trenches for cushioning of LT UG cable complete all as specified and directed. Note : (i) Only punned thickness of sand shall be measured for payment. (ii) Riddled earth shall be used for cushioning of cables after obtaining written approval from AGE (I).

Supply and lay burnt clay bricks, sub class "B", Designation 75, keeping the width of the brick parallel to the length of the cable complete all as specified and directed.

Dismantling the existing unserviceable cable and supply, lay and testing LT UG cable, PVC insulated, heavy armoured, XLPE electric cable with AIuminium conducter 1100 Volts grade/cross sectional area 185 sqmm 4 core complete all as specified and directed.

Supply, laying and testing LT UG cable, PVC insulated, heavy armoured, XLPE electric cable with AIuminium conducter 1100 Volts grade/cross sectional area 10 sqmm 2 core complete all as specified and directed.

Cutting the existing road/hardstanding (size 40 cm width and 50 cm depth) for passing pipes/ cable in trenches and making good the disturbed surface by using PCC (1:2:4) type B1 using 20mm graded aggregate at the top for a depth of 15 cm and remaining depth to be covered with excavated soil and painting with black paint, if necessary, to match with existing road, complete all as specified and directed. Note: Rates for soil filling shall be measured under relevant items of returning and filling.

Supply and lay in trenches or fixed to walls, 40mm dia galvanised iron pipe, medium grade, including all fittings etc... complete all as specified and directed.

Material and labour for earthing complete with copper earth plate of size 300 x 300 x 3 mm thick, buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of earth plate not less than 1.5 m below normal ground level, alternate layesr of Charcoal and commom salt, connected to 20mm x 3mm copper strip by means of bolts, nuts, check nuts and washers of galvanized iron or steel complete with 40mm bore GI light grade protection pipe, 20mm bore GI medium grade watering pipe with funnel including charcoal dust, salt, PCC M-15 type B1 in pit with precast RCC M-15 type B1 in cover reinforced with XPM not less than 4Kg per Sqm, test point etc, all as shown in electrical plate No. 3 of SSR Part - I (2009) Specifications complete with necessary earth work in any type of soil, removal to a distance n.exc 50 m, including testing on completion, complete all as specified and as directed by Engineer-in-Charge. Note : The cost of excavation, earth work, PCC pit, CI cover, funnel, watering pipe, wire mesh, charcoal dust, common salt, GI pipe as protection to earth lead strip shall & Earth continuity conductor upto 7.50 Mtrs are be deemed to be included in the quoted rate.

Supply and fix energy saving LED street light fittings, 45 Watts or nearest higher wattage, with in-built electronic driver, IP 66 class of protection with versatile pressure die-cast aluminium housing parts, pure polyester powder coated dark gray housing, toughened glass cover with silicon gaskets and energy efficient LED 5700K including necessary clamps and brackets made up of GI pipe light grade of suitable size fixed on wall and connecting up light fitting with copper conductor cable of suitable size from junction box to connector block including all accessories complete all as specified and as directed. Make: Crompton Cat Part No. LSTS -45-CDL -1 (Freedom + ) or equivalent in Philips/Bajaj/ Wipro/Surya/C&S Electric/Eveready as approved by AGE (I)

SCHEDULE "A" PART-IV (EXTERNAL WATER SUPPLY) Supply and fix Gun metal gate valve for 20 mm dia bore of pipe complete all as specified and directed. Make: Leader/Bir/Zoloto/Kirloskar

Supply and fix GI tubing, medium grade, 20 mm bore with all fittings and connections and laid in trenches complete as specified and directed. Make: TATA/Jindal/Zenith/Swastik/prakash

Banyan Engineers and Contractors

kvs constructions

Sri Sankar Enterprises

high tech engineers and co