Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.3 LAccepted-AOC | ₹18.3 L | L1 | Accepted-AOC Lowest |
| 2 | L2₹19.5 L+₹1.2 L (6.41%)Rejected-Finance | ₹19.5 L+₹1.2 L (6.41%) | L2 | Rejected-Finance L2 |
| 3 | L3₹23.1 L+₹4.8 L (26.5%)Rejected-Finance 179 URBAN ESTATE RAM TIRATH ROAD NR GURUDAWARA DARSHAN SINGH AMRITSAR PUNJAB 143001 | AMRITSAR | PUNJAB | 143001 | ₹23.1 L+₹4.8 L (26.5%) | L3 | Rejected-Finance L3 |
| 4 | L4₹23.2 L+₹4.9 L (26.8%)Rejected-Finance | ₹23.2 L+₹4.9 L (26.8%) | L4 | Rejected-Finance L4 |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
28 Oct 2023, 6:00 pmClosed
Garrison Engineer (East) Jalandhar Cantt
Garrison Engineer (East) Jalandhar Cantt
SEWAGE AND DRAIN CLEANING REPAIR TO SEWAGE LINE MANHOLES AND ALLIED SERVICE FOR MD ACCN UNDER AGE B/R-II OF GE (EAST) JALANDHAR CANTT
2023_MES_614867_1
GE/JULL/ET-41/2023-24
Open Tender
Civil Works
Item Rate
335 days
Jalandhar Cantt
As per tender documents
8 documents required · 8 mandatory
₹500
Garrison Engineer (East) Jalandhar Cantt
₹50,000
Yes
6 Dec 2023
30 Aug 2023
6 Nov 2023
30 Aug 2023
28 Oct 2023
16 Oct 2023
Amount
Cleaning/clearing of sewage line 150mm dia mechanically by using suction (vaccume) machine from WC to manholes or from cleaning eyes including getting out sludge/ waste from manholes and well flushing after cleaning, removing sludge/ waste to low lying area as directed by Engineer-in-Charge (upto 1.5m depth from top of MH to bottom of pipe) all as specified and directed. Note : Contractor will arrange sewer jetting machine & section machine having high pressure power to clear sludge from sewage line from 200 to 450 mm dia without any extra cost. No manual work will be allow to clear the septic tank/soakage well and manholes. Measurement will be done from manhole to manhole.
All as per item No. 1.00 but 200mm dia sewage lines.
All as per item No. 1.00 but 150mm dia sewage lines (exc 1.5m and n.exc 3.0m in depth).
All as per item No. 1.00 but 200mm dia sewage lines (exc 1.5m and n.exc 3.0m in depth).
All as per item No. 1.00 but 300mm dia and upto 450mm dia sewage lines (exc 3.0m and n.exc 4.5m in depth).
Cleaning of manholes mechanically by using suction (vaccume) machine including getting out sludge/ waste from manholes and well flushing after cleaning, removing sludge/ waste to low lying area clearing the inlet and outlet pipe mouth, etc (depth of MH n.exc 1.5m) complete all as specified and directed. Note : Contractor will arrange sewer jetting machine & section machine having high pressure power to clear sludge from sewage line from 200 to 450 mm dia without any extra cost. No manual work will be allow to clear the septic tank/soakage well and manholes. Measurement will be done from manhole to manhole.
All as per item No. 6.00 but depth of MH exc 1.5m and n.exc 3.0m.
All as per item No. 6.00 but depth of MH exc 3.0m and n.exc 4.5m.
Removing the sludge/ soil after getting out from septic tanks/ cess pool/ manholes outside defence land in low lying area by using closed sludge collection tanks. Machanically mounted of appropriate vaccume capacity all as directed by Engr-in-Charge. Sewage sludge will not be thrown inside defence land if found at any place then Rs. 10,000/- recovery for each place will be charged as penalty including removing of sludge outside defence land by means of sewage collection tanks.
Taking out existing of NT/ floor trap C1 grating and cleaning of sludges/ slit from NT floor trap including roding CI pipe from NT/ floor trap to gully trap etc in position including removing of rubbish to a distance n.exc 100mm complete all as specified and directed
Cleaning the blockage in IWC, EWC, including roding CI pipe after opening the oval asses door of CI bend C1 branch piece (T) etc upto first MH and placing the OAD in position & removing the rubbish to a distance n.exc 100m complete all as specified and directed
Taking out of gully trap cover and CI grating and cleaning of sludges/ silt from gully traps including rodings SGSW/ CI pipe from gully trap to 1st manhole length n.exc 3.0m) and placing back CI grating PCC cover etc in position including removing of rubbish to a distance n.exc 100 RM complete all as specified and directed
Supply and fixing steel fibre RCC manholes covers & frames medium duly circular (as per IS 12592) medium duly for clear opening 300/400mm complete all as specified and directed
All as per item No. 13.00 but 450/500mm.
All as per item No. 13.00 but 600/650mm.
Cutting of grass, growth/ vegetations, bushes or like and similar work and making the workable space for carrying out cleaning of sewage line/ manholes in any location or condition all as specified and directed.
Excavation in trenches in soft /loose soil, n. exc. 1.5 m wide and n. exc. 1.5m in depth for foundations etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc. 10 sqm on plan and getting out complete all as specified and directed.
All as per item No. 17.00 but depth exc. 1.5m and n. exc. 3.0m.
All as per item No. 17.00 but depth exc. 3.0m and n. exc. 4.5m.
Returning, filling in including leveling, watering and well ramming in layers n. exc. 25 cm thick each layer complete all as specified and directed.
Removing excavated material (soils) to a distance n. exc. 50m and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified and directed.
Material and labour for hard core of broken stone or boulder of gauge n. exc. 63mm, deposited, spread and leveled in layers n.exc. 15cm thick, watered and well rammed to a true surface complete all as specified and directed.
Demolition of cement concrete in ground floor and paving n. exc. 15cm thick (below or above ground level) complete all as specified and directed.
Material and labour for 100mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in path laid in panels, concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
Demolition and breaking up drain pipes 150mm bore (SGSW, AC or reinforced concrete pipe) set in cement mortar complete all as specified.
Demolition and breaking up drain pipes 200mm bore (SGSW, AC or reinforced concrete pipe) set in cement mortar complete all as specified.
Demolition and breaking up drain pipes 300mm bore (SGSW, AC or reinforced concrete pipe) set in cement mortar complete all as specified.
Demolition and breaking up drain pipes 100mm bore (SGSW, AC or reinforced concrete pipe) set in cement mortar complete all as specified.
Material and labour for salt glazed stone ware drain pipes 150mm bore laid in trenches and jointed complete all as specified and directed.
All as per item No. 29.00 but 200mm bore.
Material and labour for reinforced concrete pipes 150mm bore, class NP2, laid and jointed complete with collars complete all as specified and directed.
Material and labour for reinforced concrete pipes 200mm bore, class NP2, laid and jointed complete with collars complete all as specified and directed.
Material and labour for reinforced concrete pipes 300mm bore, class NP2, laid and jointed complete with collars complete all as specified and directed.
Material and labour for reinforced concrete pipes 100mm bore, class NP2, laid and jointed complete with collars complete all as specified and directed.
Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends, swan necks etc., including cleaning for refixing or removal to store complete all as specified.
Material and labour for PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150mm bore pipe complete all as specified and directed.
All as per item No. 36.00 but for 200mm bore pipe
All as per item No. 36.00 but for 300mm bore pipe
All as per item No. 36.00 but for 100mm bore pipe
Supply and fixing 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed.
Supply and fixing PVC (SWR) bends any radius 110mm bore all as specified and directed.
Supply and fixing PVC (SWR) junction single (Single T) 110mm bore complete all as specified
Supply and fixing PVC (SWR) vent cowl 110mm bore complete all as specified and directed.
Demolition of brick work built in cement mortar of any description complete all as specified and directed.
Material and labour for brick work with sub class 'B' bricks, old size, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar (1:4) as in manholes and septic tanks complete all as specified and directed.
Material and labour for brick work with sub class 'B' bricks, old size, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and directed.
Material and labour for MS work as small articles for handles, holdfasts, steps, rungs, etc knee piece and similar small article complete all as specified.
Material and labour for PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling, mass concrete etc complete all as specified and directed.
Material and labour for rendering 15mm thick cement plaster on brick or concrete surfaces in cement mortar (1:4) mixed with integral water proofing compound in the proportion recommended by manufacturer, surfaces finished fair and even complete all as specified and directed. (WPC shall be measured and paid separately).
Supply only integral water proofing compound all as specified.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed.
Material and labour for PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in landing, manholes covers, chajjas, shelves and similar articles with plain fair faces, including champers, weatherings, throating etc. set in cement mortar (1:4) complete all as specified and directed.
Material and labour for PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands plinth courses, roof kerbs or mud stops, benching, coping, bed plates, parapets, water troughs and the like etc including weathering, slightly rounded or chamfered angles throating etc complete including necessary form work complete all as specified and directed.
Material and labour for cutting into existing manholes for connecting 100mm bore new drains by cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-1 and making good pipe and reforming benching as required finishing even and smooth complete all as specified and directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified.
Dismantling 100/ 75mm bore cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified.
Material and labour for 100mm cast iron pipes with flanged ends, centrifugally class 'A' in any length laid in trenches complete all as specified
Supply and fixing 100mm cast iron sand cast pipe, soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls complete all as specified and directed
Supply and fixing 75mm cast iron sand cast pipe, soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls complete all as specified and directed
Supply and fixing cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) for 100mm bore pipe complete all as specified and directed.
Supply and fixing cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) for 75mm bore pipe complete all as specified and directed.
Supply and fixing cast iron tee diminishing pieces or tapers for 100mm bore pipe complete all as specified and directed.
Supply and fixing cast iron floor trap with grating including jointing to waste pipe in run lead joint fixed in cement concrete type (1:2:4) type B-1 diameter of outlet 75mm, complete all as specified and directed.
Supply and fixing mild steel CP grating 125mm dia with centre hole all as specified and directed by the Engr-in-Charge.
Supply and fixing 150mm dia SGSW gully trap set and jointed in cement concrete as in repairs complete all as specified and directed.
Material and labour for mild steel TMT bars 10mm dia cut to length bent to shape required including bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
Taking out liquid mud/ loose soil in water from drain of any depth including removing and deposited upto 50m distance all as specified and directed
Supply and fixing vitreous china squatting pan Orissa pattern size 580 x 440mm white with front or back inlet, integral foot rest including CI 'P' or 'S' trap with providing lime concrete bedding and connecting to flushing pipe complete including breaking up existing damaged WC seat and make good to floor complete all as specified and directed.
Supply and fixing PVC white low level flushing cistern 10 litre capacity with all fittings syphonic action with top push type button with inlet ball valve and float including flush pipe, ball valve, handle, PVC short bend etc. fixed on existing brackets complete all as specified and directed.
Cleaning to drains by taking out brick bat, pebbles, silts, muds, clay, sludge, grubbing up bushes etc., from the bottom of drains and culvert bed etc. and removing the same to outside the defence land in any vehicles complete all as specified and directed
Dismantling floor, hearth or wall tiling/ china mosaic including cement mortar bedding (but not backing), removing rubbish off outside MD land complete all as specified and directed.
Material and labour for non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exc. 0.11 Sqm but not exceeding 0.18 Sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) including neat cement slurry complete all as specified and directed.
Material and labour for glazed ceramic coloured tiles of size 450 x 300 x 7mm thick as in vertical surfaces i.e. skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface laid over and including 10mm thick rendering in cement mortar (1:4) and finishing the surface fair and even to receive tiles complete all as specified and directed.
Uprooting of trees, grass, bushes etc from brick wall/roof tiles or any other surfaces of building including dismantling the required brick work/ roof tiles/ mud concrete etc for uprooting the vegetation etc and make good the same to match with existing surface with same material or concrete (1:2:4) type B-1 after pouring the chemical (which destroy the growth of vegetation to the place where vegetation removed). The rate shall include for scaffolding or any other arrangement required during this process upto 10 mtr height complete all as specified.
Supply and fixing rotational moulded polyethylene water storage tanks, 500 litres capacity, (cylindrical vertical with closed top), ISI marked, hoisted and fixed in position all as specified in SSR Part I, fixed in position including dismantling of existing tank of any description all as specified and directed.
Supply and fixing rotational moulded polyethylene water storage tanks, 1000 litres capacity, (cylindrical vertical with closed top), ISI marked, hoisted and fixed in position all as specified in SSR Part I, fixed in position including dismantling of existing tank of any description all as specified and directed.
Material and labour for 15mm bore galvanised steel tubes, medium grade with & including all fittings fixed to wall, ceilings and or laid in floors etc including taking down complete all as specified and directed.
Material and labour for 20mm bore galvanised steel tubes, medium grade with & including all fittings fixed to wall, ceilings and or laid in floors etc including taking down complete all as specified and directed.
Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. Where directed complete all as specified in manholes and septic tanks etc.
Material and labour for 15mm thick cement mortar (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
Material and labour 5mm thick in cement mortar (1:3) as on ceiling including finishing the surface even and smooth without using extra cement complete all as specified and directed.
Material and labour for preparation of new plastered surface of ceiling and applying three coats of white washing complete all as specified and directed.
Material and labour for preparation of newly plastered surface of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.
Material and labour for preparation of new plastered or un-plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.
S&F vitreous china wash down water closet (Pedestal pattern) flush pipe to pedestal pan white incl fixing bolt, plastic water closet seat cover white closed pattern, with & included arrangment of jet sprey withh flat bottom and cover and mild steel chromium plated hinging device, fixed in repairs all as specified directed by Engr-in-Charge.
M/s gurdial singh and co
M/S MAHAJAN CONSTRUCTION CO
BHARAT ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .