8125/SAR-T-20/2025-26 REPAIR/ REPLACEMENT OF SANITARY FITTINGS, PLUMBING, INTERNAL WATER SUPPLY SUNKEN TREATMENT IN DOMESTIC AND TECH AREA AT AF STN SARSAWA UNDER GE (AF) SARSAWA

Amount

Disconnecting & dewatering of PVC/RCC overhead taks, scrubbing the inner surfaces, cleaning & removing all scales, dirt etc from mouth of circulating pipes, washing the tanks with fresh water and disinfecting the same by flushing with liquid chlorine or any other equivalent chemical, reconnecting & refixing in position after cleaning for tank capacity not exc 500 ltrs each including marking the date of cleaning with white paint and stencil as required complete all as specified and directed. Note: Cleaning shall be done through wash out pipe by marking suitable arrangement to the outlet pipe such as cutting of the pipe providing short piece of pipe fitting and union coupling etc where the wash out pipe are not existing. The dirt etc shall not be allowed to enter the water supply system.

All as per Item No 1.00 here-in-above but exc 500 ltr and not exc 1000 ltrs capacity complete all as specified and directed.

S & F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/laid in trenches including removing the old pipes and making good the disturbed surface as per existing complete all as specified and directed.

All as per Item No 3.00 here-in-above but for floors complete all as specified and directed.

S & F in repair 80 mm bore PVC (SWR) single junction (single 'T' ) equal or unequal provided with access door complete all as specified and directed.

S & F in repair 80mm bore PVC (SWR) bends any radius complete all as specified and directed.

S & F PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls/spout pipes including removing the old pipes and making good the disturbed surface as per existing complete all as specified and directed.

All as per Item No 7.00 here-in-above but for floors complete all as specified and directed.

S & F in repair 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S & F in repair 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.

S & F in repair 110 mm bore PVC (SWR) single junction (single 'T' ) equal or unequal provided with access door complete all as specified and directed.

S &F in repairs CI sand pipe 75 mm bore fixed to walls or laid in floors complete including jointing complete all as specified and directed.

S & F in repairs CI sand pipe 100 mm bore fixed to walls or laid in floors complete including jointing complete all as specified and directed.

S & F in repairs CI junction for 80mm bore CI pipe including jointing complete all as specified and directed.

S & F CI bend for 100mm pipe including jointing complete all as specified and directed.

S & F CI bend for 75mm pipe including jointing complete all as specified and directed.

Taking down cement plaster or other existing treatment from sunken floors, cleaning the surface with wire brushes, brooms etc and finally washing down the area to be treated and M & L for treating the sunken floors and adjoining vertical surfaces as under complete all as specified and directed:- (a) Plastering 15 mm in cement mortar (1:3) mixed with liquid type water proofing compound to sunken floors and adjoining vertical surfaces. Surface shall be cured & allowed to dry. (b) Applying Ist layer of cement slurry by brush@ 0.488 Kg per Sqm mixed with acrylic based polymer modified cementeous compound of Dr Fixit @ .253 Kg per Sqm complete as per manufacture instructions. (c) Applying 2nd layer of cement slurry by brush@ 0.488 Kg per Sqm mixed with acrylic based polymer modified cementeous compound of Dr Fixit @ .253 Kd per Sqm complete as per manufacture instructions. (c) Testing the sunken floor for water tightness by ponding water for 72 Hours. (d) Fixing of 32mm dia GI pipe medium grade spout projecting 23 cm beyond wall, one number in each sunken portion.

Taking up or down 15mm steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

Taking up or down 20mm steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

S & F in repair steel tubing medium grade 15mm bore with all fittings fixed complete to wall and or laid in floor complete all as specified and directed.

S & F in repair 20mm GI tubing Medium grade fix to wall/floor fixed complete all as specified and directed.

S & F in repairs 15/20mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed , minimum weight - 210 gms of including taking down existing ball valves any type complete all as specified and directed.

S & F in repair Vitreous china wash down water closet pan “Pedestal Pattern” white, with seat white closed pattern with flat bottom and cover mild steel chromium plated or aluminium anodized hinging device including flush pipe and joints etc and connection to drain, flushing, pipe, anti-syphonage pipe and fixing arrangements with fixing bolts etc including making good the disturbed portion of floor in cement concrete (1:2:4) type (B-0) as complete all as specified and directed.

S & F in repair Vitreous China squatting pan “Orissa ” pattern size 580 X 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe ) fixed in repairs, including connecting to trap and to flushing pipe, etc including making good to dismantled portion of floors with PCC (1:2:4) type B-0 complete all as specified and directed.

S & F in repairs Vitreous China Wash Hand Basin, white, flat back, size 550x 400 mm including PVC waste pipe 32 mm bore and CP waste coupling, chain and plug and porcelain stopper including mild steel brackets, made out of 25 x 25 x 3 mm thick angle iron of required lenght, fixed to wall with PCC type B-0), fixed including cutting for a pinning in a brackets complete all as specified and directed.

S & F in repairs Vitreous China Wash Hand Basin, white, flat back, size 630x 450 mm including PVC waste pipe 32 mm bore and CP waste coupling, chain and plug and porcelain stopper including mild steel brackets, made out of 25 x 25 x 3 mm thick angle iron of required lenght, fixed to wall with PCC type B-0), fixed including cutting for a pinning in a brackets complete all as specified and directed.

S & F 32mm dia waste fitting (waste coupling) brass chromium plated for glazed ware sink, basin etc with long screwed shanks and fly nuts flange complete all as specified and directed.

S & F in repair 32mm dia waste fitting (waste coupling) brass chromium plated for glazed ware sink, basin etc with long screwed shanks and fly nuts flangecomplete all as specified and directed.

S & F in repair Jet spray chromium plated brass for EWC with & including PVC connection1mtr long suitable for 15 mm bore GI pipe with PTMT nut & nipple complete all as specified and directed.

S & F in repair valve less symphonic action type , PVC low level flushing cistern 10 litres capacity, white, with inlet, ball valve, flot and handle including PVC flush pipe 32 mm bore and mild steel brackets made out of 25 by 25 by 3 mm thick angle iron of required length fixed to wall with PCC type B-0 (1:2:4), complete all as specified including taking down HL/LL PVC or Viterous China flushing cistern and making good the disturbed surfaces in cement mortar (1:3) complete all as specified and directed.

S & F in repairs PVC connection of 15mm bore with 2 Nos. PTMT nuts, 45cm long fixed with one end to pillar tap & the other end to stop cock or iron pipe complete all as specified and directed.

S & F in repairs PVC internal fittings (kit) complete for low level flushing cistern tank, complete all as specified and directed.

S & F in repair Tubular towel rail, 20 mm dia, D type, 60 cm long between flanges, brass chromium plated, fixed complete all as specified and directed.

S & F in repair Brass chromium plated towel rack 24 " long, fixed in position with steel screws complete all as specified and directed.

S & F in repair Plastic water closet seat cover White, closed pattern with flat bottom, and mild steel chromium plated or aluminium anodized hinging device, complete all as specified and directed.

S & F in repairs of spindles, phases of brass of any size required for bib taps, pillar cocks, stop cocks, angle valves, concealed valves complete all as specified and directed.

S & F in repairs MS grating CP 100mm dia, with hole/without for waste pipe of approved make including fixing with CM to floor/nahani traps etc complete all as specified and directed.

S & F in repairs Pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipes of 15mm bore complete all as specified and directed.

S & F Pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipes of 15mm bore complete all as specified and directed.

S & F in repairs Pillar tap, of PTMT any colour, high pressure, screwed for iron pipes of 15mm bore (Min wt 110 gms) complete all as specified and directed.

S & F in repairs fancy type center hole basin mixer without popup waste system but including plain waste 32 mm size with aerator complete cast copper alloy, chromium plated, scrwed downhigh pressure, with long scrwed shanks & fly nuts scrwed for iron pipes of 15 mm bore complete all as specified and directed.

S & F in repairs brass chromium plated WHB mixer for mixing hot & cold water screwed down for iron pipe of 15mm bore complete all as specified and directed.

S & F in repairs brass chromium plated telephonic hand shower with 1.50m long stainless steel braided flexible tube with nut & nipple & hook suitable for wall mixer & screwed down for iron pipe of 15mm bore complete all as specified and directed.

S & F in repairs brass chromium plated shower rose 125mmx125mm size with swivel joint type including fixing to steel pipe of 15mm bore or union complete all as specified and directed.

S & F in repair shower rose, PVC suitable for 15mm bore pipe with swiveling joints complete all as specified and directed.

S & F in repair bib tap cast copper alloy with crutch or butter fly handle 15mm bore chromium plated fixed complete all as specified and directed.

S & F bib tap standard of PTMT any colour 15mm bore high pressurescrewed for iron pipe fixed in repair(Min. wt 90 gms) complete all as specified and directed.

S & F in repair Stop valves, 15mm bore cast copper alloy,screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S & F in repair Angle Stop valves, cast copper alloy chromium plated screwed down, high pressure, with crutch or butter fly handle screwed both ends for iron pipe or for unions suitable for 15 mm bore tubes complete all as specified and directed.

S & F in repair 20mm bore Stop valves, cast copper alloy screwed down high presure, screwed both ends for iron pipe or for unions fixed complete all as specified and directed.

S & F in repair vitreous bowl urinal flat back,size of 465 x 355 x 265mm white(minimum),including waste coupling and waste pipe with grating ,Spreader with connection and union for discharge pipe complete all as specified and directed.

S & F in repair Stop valve of 15 mm dia PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed.

S & F in repair chromium plated Brass health faucet for EWC with including PVC Connection 1m long suitable for 15mm bore with all connected fittings as approved complete all as specified and directed.

S & F in repairs 32/40mm dia PVC flexible waste pipe 80cm long with socket for union, for WHB/urinal/sink ccomplete all as specified and directed.

S & F in repairs wall mixer chromium plated (3 in -1) with arrangement for both telephonic shower and overhead shower with 220 mm max long bend pipe with hand shower of size 100 x 55 mm with 130 mm long arm & 1.2 m house pipe complete all as specified and directed.

S & F in repairs wall mixer chromium plated (2 in -1) with arrangement for overhead shower with 220 mm max long bend pipe including over head shower etc complete all as specified and directed.

S & F in repairs glass corner shelf complete all as specified and directed.

S & F in repairs glass shelf rectangular type complete all as specified and directed.

S & F in repair 2-in-1 CP bib cock complete all as specified and directed.

S & F in repair 2 way CP angle cock complete all as specified and directed.

S & F in repairs cover for rotational moulded polyethylene water storage tanks of any capacity complete all as specified and directed.

S & F in repairs Sink Coupling including PVC flexible waste pipe 80cm long with socket for union complete all as specified and directed.

S & F in repairs vitreous china counter top/down basin size 450 x 525 x 195 mm shape oval including 32 mm CP waste coupling & PVC flexible waste pipe of 90 cm long complete all as specified and directed.

S & F in repairs vitreous china wash down water closet pan (Pedestal pattern EWC), coloured, floor mounted coupled closet, including connection to drain (or outgoing pipe), anti-sypohonage pipe etc, with & including WC seat cover coloured closed pattern with flat bottom and cover, CP jet nozzle, vitreous china symphonic action type twin flush flushing cistern of 10 litre capacity with lid, necessary fittings complete all as specified and directed.

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M & L for rendering 10mm thick in cement mortar (1:6) on fair faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra complete all as specified and directed.

M & L for rendering 15mm thick in cement mortar (1:4) on stone wall surfaces or other than fair faces of brick work & surfaces finished even and smooth without using extra cement with water proof compound ( water proof compound paid seperatly) complete all as specified and directed.

M & L for rendering 5mm thick in cement mortar (1:4) on concrete surfaces in ceiling, finished even & smooth without using extra cement complete all as specified and directed.

M & L for preparation of new plastered surfaces of walls and applying one coats of Oil bound distemper over a coat of 1mm thick wall care putty of approved tint complete all as specified and directed.

M & L for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M & L for preparation of newly plastered surface of walls & applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M & L for preparation of newly plastered/unplastered surfaces of ceilings & applying three coats of white wash complete all as specified and directed.

M & L for preparation of newly plastered/unplastered surfaces of ceilings & applying two coats of oil bound distemper (OBD) complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) of any thickness complete all as specified and directed.

M & L for false ceiling made out of E-board classic of size 595 x 595 x 4 mm thick, (as approved by GE) fixed with existing frame work fixing the board to frame complete all as per manufacurers instructions complete all as specified and directed.

S & F in repairs powder coated stainless steel drapery rod of 25 mm inner dia (in lengths as directed) of approved colour with & including decorative bowel at both ends and pair of powder coated mild steel brackets fixed at both ends with PVC rawl plug & steel screws on walls/beam, including PVC curtain rings of matching colour @ 10cm C/C complete all as specified and directed.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but ot backing) , removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L for vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick screed bed in cement & sand mortar (1:4) complete all as specified and directed.

M & L Glazed ceramic coloured tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles and over 10 mm thick rendring in cement mortar (1:4) complete all as specified and directed.

M & L Glazed ceramic coloured tiles in vertical surface 300x200X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles and over 10 mm thick rendring in cement mortar (1:4) complete all as specified and directed.

M & L for 18/19mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, windowcills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick screed bed cement mortar (1:6) complete all as specified and directed.

M & L kota stone slab 10-15 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over rendering back of tile 10 mm cement mortar (1:4) complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exc 15 cm thickness (below or above ground level.) & removing unserviceable materials in low laying area complete all as specified and directed.

M & L for 25 thick cement concrete (1:2:4), type B-1 (using 20mm graded crushed stone aggregate) as in levelling coarse for tiles complete all as specified and directed.

M & L for vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar (1:6) complete all as specified and directed.

M & L for coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar (1:6) complete all as specified and directed.

M & L machine cut kota stone slab flooring 20-25mm thick and area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over screed bed 15mm thick (1:6) cement mortar complete all as specified and directed.

M & L for 50 mm thick PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) as in plinth protection surface finished fair and even complete all as specified and directed. Note :- Plinth protection shall be laid to slope (1 in 30) in bays not exceeding 3 metre in length and joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with sealing compound grade B.

Dismantling of cement concrete (un-reinforced) kerb stone and the like of any description of and in any position not otherwise specially provided for complete all as specified and directed.

M & L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar (1:3) including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

Demolition/Removal of existing RCC water tank including cover (Capacity not exc. 1000 Ltr) placed on roof of the Bldgs/Quarters including removal of their staging/platform complete all as specified and directed. Note : (i) Tank/staging shall be taken down after demolition in small pieces. (ii) Demolition shall be carried out carefully without damaging roof treatment. (iii) Roof treatment came out/damaged during demolition shall be made good with same specification without any extra cost. (iv) Small trees/Plantation near the tank shall be uprooted and roof treatment shall be made good.

M & L for brick work placed on roof of the Bldgs/Quarters for water tank plarform with sub class brick (OLD SIZE BRICKS) straight or curved on plan exc 6 mtr mean radius built in cement mortar (1:6) complete all as specified and directed.

M & L for rendering 15mm thick in cement mortar (1:4) on stone wall surfaces fair faces of brick work & surfaces finished even and smooth without using extra cement mixed with water proof compound (water proof compound paid seperatly) complete all as specified and directed.

Supply only integral liquid water proofing compound (ISI marked) complete all as specified and directed.

S & F rotational moulded polyethylene water storage tanks of capacity 500 Litre double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc as specified in SSR Part-I complete all as specified and directed.

S & F rotational moulded polyethylene water storage tanks of capacity 1000 Litre double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc as specified in SSR Part-I complete all as specified and directed.

S & F Ball valves, high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball, screwed for iron pipe 15/20mm dia (minimum weight 142/210 gms) complete all as specified and directed.

S & F in repairs door closer hydraulically regulated, designation No. 3, aluminium (Die cast) body, universal type (ISI marked), fixed complete all as specified and directed.

S & F in repair for double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, fixed in repairs, with & including replacement of floor tiles if any broken during repair work and making good disturbed surfaces matching to the existing surfaces complete all as specified and directed.

S & F in repairs brass mortice lock, vertical type, size 65mm, 4 Levers with escutcheon plates & two keys fixed in aluminium frame complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

M & L for 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces complete all as specified and directed.

M & L for 3mm thick froasted glass and glazing with oil putty in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces complete all as specified and directed.

S & F in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18mm and fixed tinned tacks or GI wire stampe or nails and screws fixed complete all as specified and directed.

G.H. INFRASTRUCTURE PRIVATE LIMITED (BID ID -3361565)

RAJAN TRADERS (BID ID -3354066)

SUBHASH CHAND CONTRACTOR (BID ID -3361979)

NAQLI LAL SHARMA AND ARUN SHARMA (BID ID -3361824)

PANWAR CONSTRUCTIONS (BID ID -3360825)