AS AND AS WEATHER PROOF PAINTING OF SAILORS INLIVING A AND B BLOCK AND AS AND AS TO ADMIN BUILDING AT INS RAJALI ARAKKONAM

Amount

Taking down cement plaster on brick walls including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed

M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces in two layers 10mm thick in CM 1:4 followed by 5mm thick CM 1:4 with approved WPC, finished even and fair complete all as specified and as directed

M&L Integral waterproofing compound

M&L for complete removal of existing treatment from old decorated plastered surfaces by Vacuum based sanding machine, removal of nails etc & filling cracks/hole with putty and applying wall care putty upto 1mm thick as required (Multipurpose mixer shall be used for uniform and propper mixing of putty) and applying two coats of emulsion weather coat white/coloured over a coat of exterior primer by auto roller for G+2 storey bldg as per site requirement complete all as specified and directed as per manufacturer instruction. Note:i) All work shall be carried out by approved applicator of paint manufacture only. The same shall be approved before carrying out the work from GE. ii) Contractor should submit Auth applicator certificate before execution of work. iii) Contractor should submit warrenty certificate for 5 years from manufacturer. iv) Columns, Beams and Chajja to be painted different colour as per direction of Engr-in-Charge v) Workers should wear appropriate personal protective equipment.

S & F for second class hard wood plain fillets , square , rectangular or triangular in section, sectional area exc 13 sqcm and not exc 25 sqcm complete all as specified and as directed

M& L for preparing surfaces of wood and wood based materials , new or old of any description and girth, not otherwise described and treated with two coats of creosote complete all as specified and as directed by Engr- In- Charge.

S & F for second class hard wood in scantling timber framed and fixed clean sawn wood complete all as specified and as directed

M& L for french polishing on surfaces of any description, width or girth including cleaning and preparing the surfaces including a coat of wood filter on new works with two or more coats complete all as specified and as directed

S &F Anodised aluminium snap grid(size of grid 605 x 605mm) frame work for false ceiling all as specified

S &F Hangers 6 mm dia. G.I. (upto 1200mm length) (size of grid 605 x 605mm)adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

M &L Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and as directed

Demolition of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets/ frames complete all as specified and as directed

Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sq. m but n exc 4 sq. m each complete all as specified and as directed

Supply and fix powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates (minimum thickness of powder coating 50 micron) including joining cleat for fixing etc. complete all as specified and as directed. Refer TD CEVZ/2022/TD-16

Supply and fix powder coated anodised sliding/hung type aluminium door, window and ventilator shutters (minimum thickness of powder coating 50 micron), without sash, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 No), hinges type B-21 100 mm long (2Nos) suitable handle (1 No), aluminium tower bolt 100 mm (1No) etc. complete all as specified and as directed as per TD CEVZ/2022/TD-06 and CEVZ/2022/TD-13

S&F 5.5 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed.

Supply and fix for powder coated anodised aluminium grill of 8x 8mm bars size of opening 10cms size mesh with aluminium channel 'F' angle 20 x 15mm aluminium frame work complete all as specified and as directed as per TD CEVZ/2022/TD-16

Material and labour for preparation of old decorated wall surfaces by washing rubbing down and stopping of distempered surfaces and filling the nail holes by white cement and applying two coat of oil bound distemper white or tinted with roller over 1 mm thick putty application complete all as specified and as directed.

S &F 10-12 mm thick polished second class hardwood laminated boarding in floors and skirting planed one side & edges tongued and grooved or rebated including foam sheet/ polyethelene sheet below boarding to avoid dampness, necessary nailing/ screwing finished complete all as specified and as directed

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and as directed

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the permises etc., complete all as specified and as directed

M &L Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately) complete all as specified and as directed

S & F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed

S & F Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and as directed

Material and labour for two coat of synthetic enamel painting on new or previously untreated steel surfaces of any description, not otherwise described over 10cm width or girth including preparation complete all as specified and as directed

Material and labour for two coat of synthetic enamel painting on old painted wood surfaces of any description, not otherwise described over 10cm width or girth including preparation complete all as specified and as directed

M& L for french polishing on surfaces of any description, width or girth including cleaning and preparing the surfaces including a coat of wood filter, one or more coats on old work complete all as specified and as directed

S & F first class hard wood 30mm thick plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), fitted to chowkats complete all as specified and as directed

S & F first class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed

Fancy type Butt hinges(100mm size), cast brass, with brass/bronze hinge pin, bright polished and fixed, typeB-11 complete all as specified and as directed

Extruded brass handles, 125mm size fabricated type polished complete all as specified and as directed

Brass Mortice lock, 4 levers vertical type, size100 mm complete all as specified and as directed

Floor door stopper of brass body and tongue with hard drawn steel spring, 150mm complete all as specified and as directed

Aluminium (extruded section body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed

Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed

Brass, sliding door bolt , 250mm with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and as directed

S & F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed

Dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed

M &L 1.5mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instruction complete all as specified and as directed

Supply and Fix second class hardwood handrails 75 x 60mm size rounded or shaped with splayed faces in straight lengths, but moulded complete all as specified and as directed by Engr- In- Charge complete all as specified and as directed

Supply and Fix second class hardwood Newel posts, wrought, with square, rounded, chamfered or stop, chamfered edges, mortices for strings and handrails,t sectional area n exc 100 mm x 100 mm complete all as specified and as directed

Supply and Fix second class hardwood Caps 100 x 75 mm (turned to match section of handrail and mitred in) including handrail screws and dowels (dia of cap twice the width of handrail), complete all as specified and as directed

Supply and Fix second class hardwood Balusters, 50 x 50mm size square wrought and fixed, with ends housed (square or splay) to handrails and treads or strings complete all as specified and as directed

Supply and Fix 10mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and as directed

M & L for 2 coat of plastic emulsion over a coat of primer after preparation on new or previously untreated surfaces of any description over 10cm girth or width, not otherwise described complete all as specified and as directed

Dismantling posts or struts as in handrail emboded in concrete, brickwork, masonry etc any material any section, including taking out embedded portion and making good disturbed ground complete all as specified and as directed

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in with CM 1:6 complete all as specified and as directed

Material and labour for preparation of newly plastered surfaces of wall by Vacuumbased sandng machlne, applying wall care putty 1mm (Multipurpose mlxer shall be used for uniform and proper mlxing of putty) and applying One coat of primer and two coat of emulsion distemper white or coloured by auto roller / Airless Sprayer complete all as specifled and directed

M & L heavy duty single glass door lock suitable for 10mm thick main door, one side knob one side key complete all as specifled and directed

M & L a pair of stainless steel alloy corrosion resistant handle for glass door(size of handle 18 inch) complete all as specifled and directed

M & L stainless steel two way opening floor spring closure suitable for glass door weighing upto 75 Kg complete all as specifled and directed

M & L custom frosted sticker for toughned glass complete all as specifled and directed

S & F PVC venetian blinds for windows, including aluminium frame and weights complete all as specified and as directed

Taking down copper/aluminium point wiring (light,fan, socket or power) complete, including fixtures, PVC conduits and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc. removing materials from wall/ceiling etc to store for keeping in safe custody or for taking credit and making good disturbed surfaces of wall, floors, etc. all as specified and as directed.

Material and labour for Point wiring with 1.5 sqmm (Nominal area) unsheathed FRLS multi-stranded copper conductor PVC insulated cable 1100 volts grade single core drawn into and including non metallic rigid PVC conduit of size not less than 20 mm dia concealed wiring through Wall/Ceiling/Flore along with FRLS 1.5 sqmm unsheathed multi stranded copper conductor cable PVC insulated 1100 volts grade as earth continuity conductor connected to common earth dolly and including 2 mm thick terminal boxes MS sheet flush mounted with 3 mm thick laminated hylem sheet fixed with camium plated iron screws for mountling switches, socket, fan regulators etc complete for for the following point wiring and making good disturbed surfaces matching with existing paint complete all as specified and as directed.

One Light/Fan point controlled by one switch.

One 3 pin socket outlet 5 Amps, same board with cables 1.5 Sqmm size.

One 3 pin socket outlet 5 Amps, independent board with cables 2.5 Sqmm size.

All as per item No.55 above here in before but one 5 pin socket outlet 5/15 Amps, indipendent board with cables 4 Sqmm size.

Supply and fixing Modular switch one way 5/6 A white Active one module all as specified and as directed by the Engineer-in-Charge.

Supply and fixing in repair of Modular step type fan regulator,120 W white Active two module all as specified and as directed by the Engineer-in-Charge.

Supply and fixing Modular socket 5 Amp, 2/3 pin Active white two module complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing Modular socket 16 A, 5 pin multi purpose Active white two module complete all as specified and as directed by the Engineer-in-Charge .

S&F Ceiling rose three terminals/ PVC/ polycarbonate, isolated body complete all as specified and as directed by Engr-in-Charge

Supply and fixing in repair of GI metal flush box suitable for mounting moduler plate of following modules:-

3 Module

6 Module

12 Module

18 Module

Supply and fixing in repair of combined both frame and cover plates fixing on mounting boxes for following modules:-

3 Module

6 Module

12 Module

18 Module

Supply and Fix Recess mounted low depth LED 2 feet x 2 feet LED 36W (or nearest higher Wattage) luminaire with white powder coated CRCA housing & luminous efficacy more than 100 lm/W, surge protection 2.5kV, more than 25000 burning hours and full window acrylic diffuser including taking down old one and taken as credit complete all as specified and as directed.

Supply and replacement of Metal clad socket single pole and neutral enclosure with a two pin and earth plug top and socket complete with one doble pole 20 Amps MCB C Type 230 Volts 2 all as directed.

Material and labour for Sub main wiring with two run single core 4 sqmm and one run single core 4 sqmm ass earth wire with multi stranded copper conductor PVC insulated unsheathed FRLS cable 1100 volts grade confirming to IS-694 continuity conductor drawn into and including non-metallic rigid PVC conduit 20 mm dia concealed wiring through wall/ceiling/floor/roof etc including conduit accessories including taking down old sub main wiring with PVC conduit and taken as credit complete all as specified and as directed.

Taking down the AC Indoor unit after pumping down refrigerant gas and refixing the same and connecting up including provision of cable, copper pipes, insulations etc after wall panel works all as directed by Engr-in-Charge

Taking down the Ceiling Fan/Wall Fan/Exhaust Fan, cleaning and greasing and refixing the same and connecting up including provision of cable from ceiling rose with using 1.5/2.0 feet down rod as required in site after false ceiling all as directed by Engr-in-Charge

SREE BALAJI ENTERPRISES

RK CONSTRUCTION

S MARI CONTRACTOR

SUSII CONSTRUCTIONS

C SRINIVASAN

m/s SRI VALLI ENTERPRISES

CRJ ENTERPRISES