Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹68.3 LAccepted-AOC | L1 | Accepted-AOC Acceptance of tender | |
| 2 | L2₹83.5 L+₹14.5 L (21.0%)Rejected-Finance | L2 | Rejected-Finance Being Higher bid | |
| 3 | L3₹88.1 L+₹19.1 L (27.7%)Rejected-Finance H 11 SECTOR S LDA COLONY KANPUR ROAD LUCKNOW UP 226012 | LUCKNOW | LUCKNOW | UTTAR PRADESH | 226012 | L3 | Rejected-Finance Being Higher bid | |
| 4 | L4₹94.3 L+₹25.3 L (36.6%)Rejected-Finance E 30 RAJIV NAGAR BEGUMPUR NEW DELHI 110086 | NEW DELHI | NEW DELHI | DELHI | 110086 | L4 | Rejected-Finance Being Higher bid | |
| 5 | L5₹97.2 L+₹28.2 L (40.9%)Rejected-Finance 307 SADAR BAZAR LUCKNOW UP 226002 | LUCKNOW | UTTAR PRADESH | 226002 | L5 | Rejected-Finance Being Higher bid |
Tender Value
₹1.0 Cr
EMD Value
₹1.8 L
Closing Date
13 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE LUCKNOW
HQ CWE Lucknow, 229 MG Road, Lucknow Cantt, Lucknow-226002
SPL REAPIR TO BLDG NO P 9/2 P 9/3 P 9/4 AND ANCILLARY BLDG OF HQ CC OFFR MESS UNDER GE (EAST) LUCKNOW
2023_MES_591659_2
CWE/LKO/E/T-19 OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
Lucknow
Please refer Tender documents.
8 documents required · 8 mandatory
₹1,000
GE East Lucknow
₹1.8 L
Yes
26 Jun 2023
26 May 2023
15 Jun 2023
26 May 2023
13 Jun 2023
1 Jun 2023
26 May 2023 - 1 Jun 2023
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as spd/directed by Engr-in-Charge.
Demolition of cement concrete (unreinforced) in ground floor and paving n. exc 15 cm thickness (below or above ground level) complete all as specified and as directed.
Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc all as directed.
S&F glazed ceramic coloured tiles 7 to 8 mm thick 600 x 300mm size in vertical surface set and jointed in neat cement slurry and pointed in colour cement paste pigmented to the shade. Etc including 10 mm thick rendering in CM 1:4 complete all as specified.
M&L mirror polished machine cut kota stone slab as in flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.
M&L wax polished machine cut kota stone slab as on skirting / dado 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing over and including 10mm thick plaster in cement mortar 1:4 complete all as specified and as directed.
M&L chequred cement concrete tiles 30 cm x 30 cm x 20-22mm thick glossy finish set and jointed and pointed in neat cement slurry with grey cement and pigment in floors including 20 mm screed bed in CM 1:6 complete all as specified.
M&L 75 mm thick cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth protection/ path laid in panel surface finished even and fair complete all as specified and as directed.
M&L forming contraction (Dummy) joints 65mm deepX10mm wide, filled with sealing compound of grade 'A' and complete all as specified and as directed.
M & L rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finishing even and smooth without using extra cement
Ditto all as per item 10 above but 15 mm thick on other than fare faces of brick work in CM 1:6
M&L for rendering 5 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement, complete, all as specified.
S&F glazed ceramic (non skid) joint free edge cut coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm (400mmx400mmx8mm thick ) set and jointed in neat cement slurry and pointed in colour cement as in floor over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and as dierected.
M & L for preparing new surfaces of walls and applying two coat of Oil bound distemper on new surface complete all as specified and as dierected.
M & L for preparation of new plastered surfaces and applying three coats of white wash on ceiling surfaces complete all as specified.
M & L for complete removal of existing treatment on wall / roof projections inlcuding facia, cornice etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sandindg pad of appropriate grit to make surface clean, free from dust, loose paint etc by skilled labour including applying minimum 1mm thick wall care putty over prepared surface to achive the even and smooth surface for paniting including applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over putty complete all as specified and directed. (Note: Primer and emulsion to be carried out through airless spray machine)
M & L for mirror finished polishing including griding / cutting of existing old kota stone floor complete all as specified and directed by Engr-in-Charge.
Demoilition and beaking up drain pipes (salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specifed.
S & F 110 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint laid in trenches as directed .
S & F 110 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes as directed
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as speicified and direceted.
S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0
M&L for preparation of new surfaces of steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of red oxide complete all as specified.
Dismantling of AC sheet (corrugated or semi corrugated etc) including AC ridges in large patches as in roof covering complete all as specified and as directed. Note:- opening of existing wind tie where required for taking down of AC sheet is included)
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws as specified.
Dismantling cast iron work of any description
S&F steel work in tubular trusses ,rafft ,purline ,etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and directed by Engr-in Charge .
S&F in repair vitreous china wash basin, white, flat back, size 550 mm x 400 mm fixed on and including cast iron cantilever bracket 32 mm dia brass waste coupling and including fixing of tap, waste fitting and union complete all as specified and as directed. Note : Pillar tap shall be measured as supply only under respective item.
S & F in repair vitreous China bowl type urinal flat back size of 465 X 355 X 265 mm white with grating and union for discharge pipe complete with and providing and fixing plugs , bedding against wall in Cm 1:2 , securing urinals to plugs with and including 60 mm long brass screws fixing with brackets, flush pipe etc. as directed
S&F in repair vitreous china squatting pan “ORISSA PATTERN” size 580mmx440mm ‘white’ with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe anti syphonage pipe including 100 mm P trap and Packing with PCC 1:2:4 etc complete all as specified and as directed.
Supply and fixed in repair 15 mm dia bore fancy type pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or “cold’ with long screwed shank and flynuts, screwed for iron pipe and fixed complete all as specified and as directed.
S&F in repair 15 mm dia chromium plated fancy type angle valve with capstan head long screwed shank including cp cover plate etc all as specified and directed.
S&F in repair PVC connection 15 mm dia and 450 mm long with both end brass fly nut complete all as specified and as directed.
S & F in repairs 10 ltrs capacity PVC low level flushing cistern white, ISI marked, make as specified with inlet, float valve and handle including bracket with 32 mm dia PVC pipe 600 mm long complete all as specified and as directed.
S & F in repairs fancy type chromium plated cast copper alloy fancy type bib taps long shank with capstan head & cup 15 mm dia bore complete all as specified and as directed.
S & F in replair 125 mm fancy type shower roses brass chromium plated with C P arms for15mm bore GI pipe.
S & F in repairs 15 mm dia bore stop valves cast copper alloy chromium plated fancy type with long shank & cup (concealed type) complete all as specified and as directed.
Taking up or down GI tubing 15 mm bore pipe and connections including cleaning for re-fixing or removal to store
Taking up or down GI tubing 20mm bore pipe and connections including cleaning for re-fixing or removal to store
S&F GI tubing 15 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified.
S&F GI tubing 20 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified.
S&F PVC floor trap size 75 mm dia outlet with grating including connection to waste pipe with cement joint including taking down existing trap complete all as specified and as directed .
S&F of SS grating 125mm dia with waste hole complete all as specified and as directed .
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n. exc 1.5 Sqm each complete all as specified and directed.
Taking down shutter exc 1 Sqm but n.exc 2 Sqm each complete all as specified and as directed.
S&F IInd class hard wood plain, soild chowkhats and frames wrought,framed rebated on the solid rounded or chamfered put together with glue pined at jints all as specified and direcetd at site
S & F 35mm thick flush shutter, solid core construction with block board core and ply wood panels of commercial type on both side complete all as directed.
S&F 35 mm thick second class hard wood locally fabricated glazd and skelton door shutter open rebated and prepared to receive glass or gauge etc divided into square with palin chamfered or rounded, mitred and rebated sash bars any number complete all as specified and as directed.
S&F 30 mm thick IInd class hard wood locally fabricated glazed and skelton window or ventilator shutter open rebated and prepared to receive glass etc divited into square with plain chamfered or rounded, mitred beads for securing glass/gauge complete all as specified in SSR Part-I 1991 section 8 clause 8.20 (b)
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing and as directed by Engineer-in-Charge
S&F for 30 mm thick factory made solid panel PVC door shutter confirming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 guage thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded PVC `C' channel of size 30x50mm forming styles and 5mm thick 75mm wide PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross PVC sheet as gap insert for top rail and bottom rail panelling of 5 mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of 'C' channel using PVC solvent adhesive complete as per manufacturers specifications & drawings and as directed by Engineer-inCharge.
S&F mild steel work as in framed work as in grill with ends of bars shouldered and riveted or fixed in spike framed guard bars confirming to Fe-410-0 or Fe 310-0 complete all as specified and as directed.
S&F IInd class hard wood small fittings such as brackets of any type latch and hinge blocks shaped door and windows stops and the like including all labours articles n.exc 200 cum each complete all as specified and as directed.
S&F 100mm long tower bolt of stainless steel fixed complete all as specified and directed.
-Ditto- as above item but 200 mm long
S&F 150mm long handle of stainless steel, ovel type fixed complete all as specified and directed.
-Ditto- as above item but 100 mm size .
S&F butt hinges, ISI market medium weilght cold rolled mild steel and fixed complete all as specified and as directed 100 mm size.
-Ditto- as above item but 75 mm size.
S&F stainless steel wire clothes 0.45 mm nominal dia of wire and average width of operturel 1.40 mm complete fixed with SS wire staples all as specifed and as directed.
S&F sheet glass 3 mm thick ordianary quality and galzing with wooden beads or oil putty in square n.exc 0.5 Sqm in each pane complete all as specified and as direcetd at site.
S&F mild steel work as in hold fast made out of flat iron 25mm x5 mm including necessary welding or fixing with nut and bolts complete all as specified and as directed
M&L PCC 1:3:6 type C-1 using 20 mm graded stone aggregate for filling in bed block of hold fast etc complete all as specified and as directed.
M&L preparing wood or wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L preparing steel surfaces over 10 cm width or girth and applying two coat synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
Taking down rain water pipe and eaves gutters (any size and pattern) including all fittings heads shoes bends swan necks etc
S & F 110 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls with MS clamps as directed.
S & F 110 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes in walls as directed
Demolition of brick work of any type built in cement mortor etc complete all as specified
M&L for brick work built in cement and sand mortar 1:6 with sub class 'B' old size bricks straight or curved on plan exceeding 6m means radius complete all as specified.
M&L making good broken egdes of chajjas slabs, facing, fins etc in patches area not exceeding 1 Sqm of each patch, height upto 10 metre, with 15mm thick cement plaster and sand mortar (1:3) or with PCC 1:2:4 type B-0, with necessary form work, finished the surface even and smooth without using extra cement complete all as specified.
S&F 500 ltrs three layer in white colour capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling water tanks and removing to store all as per specified and directed.
S& F white colour triple layer rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and jointed in position all as specified in SSR Part-I (1000 ltr capacity) including disconnecting existing tank and providing all necessary fittings for connecting with pipe line, metal lockable cover.
S&F 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high desity plastec ball screwed for iron pipe and fixed. (Minimum weight 20mm - 210 gms) etc complete.
S&F in repair gun metal gate valves with iron wheel head 20mm complete all as specified.
M & L TMT bars 10 mm dia and over cut to length bent to shape required, including cranking and binding spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or secured with clips.
Ditto as per item 77 above but 6 to 8 mm as in stirrups, spacers & binders.
M & L RCC nominal mix as 1:2:4 type B1 using 20 mm graded aggregate for slabs support on walls beams and columns, in floors roofs landings balconies etc.
M & L form work for soffits and sides of suspended slabs such roof slabs, floor slabs, landing and similar works not exceeding 200 mm thick (horizontal or soffits) rough finished surfaces of concrete flat.
Ditto- as above item but edges of concrete flats n.exc 10 cm wide.
Dismantling of timber boarding(wooden CB) any description fixed in any position fixed with nails etc complete all as directed.
S&F 18/19 mm thick block baord grade 1 quality exterior grade, decorative type with decorative face veneer on one face and other front face is laminated with 0.90 mm decorative lamination type I with approved by Engr-in-Charge.
S&F 150mm long fancy brass handle for cupboard & wardrobe shutter complete all as specified and as directed by Engr-in-charge
S&F auto hinges of 3"X2"X1" size SS body complete all as specified and directed.
S&F continous piano hinges of brass with width 30mm of flap .
Demolition of cement concrete (reinforced) in ground floor and paving n. exc 15 cm thickness (below or above ground level) complete all as specified and as directed.
M& L for Virified Ceramic tiles double charge/dark shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm,n.exc 1 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6, complete all as specified and as directed.
All as per above item No. 89 but on vertical surfaces including 10mm thick screed plaser in CM 1:4 ccomplete all as specified and as directed.
M & L for non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceedubg 0.18 Sqm but not exceeding 0.36 Sqm , in floors etc set in on 15 mm thick in net cement screed (1:4) slurry and pointed incl white or colour cement to match complete all as specified and directed.
M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps jambs, pillars, window-cills cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.
M & L for applying two coats of plastic emulsion paint over a coat of Birla putty over a coat of primer on new / old plastered surface including preparation all as directed
M & L for applying two coats of plastic emulsion paint on ceiling over a coat of Birla putty over a coat of primer on new / old plastered surface including preparation all as directed
M & L for minimum 1mm avg thick wall care putty on wall / ceilings to achive the even and smooth surface for paniting complete all as directed
S&F 20 mm thick flush shutter, solid core construction, with block board core and plywood face panels. Commercial type on both sides incl 4.00 mm thick Veneer on both sides of cup board shutter with adhesive and necessary fixtures including 0.9 mm thick decorative laminate type B-1 sunmica both of surface finish, colour and pettern approved, fixed with approvedadhesive, and all necessary fitting all as specified and directed by Engr-in-charge.
M&L exterior designer tile 10 mm thick (square/rectangular) area of each tiles exc 600x600 mm but in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including screed bed or bedding layers of mortor 15 mm thick for laying floor finishes with CM 1:6 etc complete all as specified and directed.
S&F 30 mm thick flush shutter, solid core construction, with block board core and plywood face panels. Commercial type on both sides incl 4.00 mm thick MDF board on both sides of flush shutter with adhesive and necessary fixtures including 0.9 mm thick decorative laminate type B-1 both of surface finish, colour and pettern approved, fixed with approvedadhesive, all as specified and directed by Engr-in-charge.
Supply and fixing factory made 30 mm thick glazed and skeleton shutters (window/ventilators) made of IInd class hard wood, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24 (b) of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat, complete all as specified & directed
S&F 125mm butt hinges extruded brass with mild steel hinge pin,bright polished and fixed, type B - 11 all as specified.
S&F brass handle ,extruded, fabricated type polished 150mm long.
S&F brass sliding door bolt 300mm long with sand or die-cast brass hasp & staple(bolt type) and fixing bolts and sliding bolt with rolled or drawn brass bolt .
S&F stainless steel sliding door bolt 250mm long with stainless steel hasp & staple(bolt type) and fixing bolts and sliding bolt complete all as specified & directed
S&F 200 mm long brass barrel tower bolts with barrel of extruded section.
S&F 150 mm long brass barrel tower bolts with barrel of extruded section.
S & F Brass mortice lock, 4 levers vertical type, size 100mm all as specified
S&F in repairs aluminium(extruded section body) door closer hydraulically regulated designation No. 3, universal type suitable for door shutter of 851 to 1000mm in width and of weight between 61to 80 Kg all as specified.
M&L Applying two coat of melamine wood polish on new wooden surface surfaces incl prep and applying sealer/filler etc to have smooth and glossy finish surface to the entire satisfaction of GE.
Supply and Fixing sheet glass 5.5mm thick ordinary quality and glazing with oil putty or rubber and aluminium beading in squares n. exc 0.5 sqm in each pane complete all as specified and directed.
Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed by Engr-in-Charge.
S&F solid PVC Wall Linning consisting of 5mm thick wood grain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing complete all as specified and as directed.
S&F angle iron/boxes as framed work for shed ,chajja,projection etc and similar work conforming to Fe-290 Gde E-165
S&F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with coach screw and washer in roof, wall etc complete all as specified and as directed.
S&F in repair 15 mm bore CP wall mixer with provison for bath overhead shower complete with 115 mm long bend pipe, connecting legs & wall flange (without overhead shower) fixed in iron pipes etc all as specified and directed.
S&F single lever Basin mixer without popup waste system with 450 mm long braided holes etc all as specified and directed.
S&F in repair 15 mm bore 2-way bib cock with flange etc all as specified and directed.
S&F, in repair, 15mm dia long body bib taps, cast copper alloy chromium plated fancy type with capston head sc-rewed down, screwed for iron pipe or for brass ferrule all as specified and directed.
S&F in repair vitreous china floor/wall hung WC with flushing cistern, UF seat cover, hinges, accessories set of size 375 x 650 x 800/370 x 645 x 810 mm fixed to wall/floor with P/S trap complete as per manufacture's instructions all as specified and directed.
S&F in repair vitreous china table top Wash Hand Basin of size 635 x 430 x 190 mm with bottle trap complete all as per manufacturer's instruction.
S&F in repair health faucet (ABS Body) with 1.00 Mtr long flexible tube incl wall hook complete all as specified and directed.
S&F in repair CP Shower rose with arms 15mm dia complete all as specified and as directed.
S&F in repair brass CP tubular towel rail of superior quality 20mm dia 60cm long between flanges fancy type all as specified.
S&F in repair Towel ring 200mm dia superior quality fixed as in repair all as approved.
S&F PVC bath cabinet with 4 mm thick looking mirror of overall size 560 x 410 mm fixed on wall etc complete all as specified and directed.
S&F in repair chromoium plated box type toilet paper holder fancy all as specified.
S&F in repair 15mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed long body for kitchen sink complete all as specified and directed.
S&F in repair 32 mm bore of pipe low density (LDPE) of pressure rating 6 kg/ sqcm fixed to wall or floor etc including fittings complete all as specified and as directed.
S&F in repair CP angle valve for 15 mm bore pipe with capstan head long screwed shank including cp cover plate fancy type complete all as specified and as directed.
S&F in repair CP shop dish fancy type etc fixed on wall surfaces etc all as specified and directed.
S&F in repair glass corner self assembly, fancy type, made of 6 to 7mm thick sheet toughened glass of size 250x250mm, fixed with CP brackets, complete all as specified and directed.
Supply & fix in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
Dismantling of cast iron drain pipe 100/75 mm dia including all fittings jointed in lead joints or cement joints and taking out of under floors if required.
S & F 100 mm dia cast iron soil waste and vent pipes sand cast in any length with or without laid in wall/trenches or in floor with cement joints
S & F 75 mm dia cast iron soil waste and vent pipes sand cast in any length with or without laid in wall/trenches or in floor with cement joints
S & F 100 mm bore cast iron bends of any radius diminshing pieces or tappers (larger bore measured)
S & F 75 mm bore cast iron bends with acces door of any radius diminshing pieces or tappers (larger bore measured)
S & F 75 mm bore cast iron bends of any radius diminshing pieces or tappers (larger bore measured)
M&L PVC(SWR) gully trap 125/110mm, setting and jointing with solvent cement
.M & L for cutting chases n. exc 10 cm girth in brick wall and making good in cement mortar 1:3 for embedding of AC sheet in wall complete as all specified and as directed.
M&L reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as beams all as specified
M&L form work to sides and soffits of beams , lintels etc. complete all as specified and directed by Engr-in-charge.
Dismantling textile covering incl frames (if any) and cover fillets in ceiling (measured flat and not girthed)
S&F GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre / intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with wire 4 mm dia and necessary cleats and steel expansion fasteners with and including ceiling section (not exc 1.2 m length ) of 5.5 mm thickness having kurled web of 50 and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm cenetre to centre and hangers 6 mm dia GI (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x3 mm size 60 min long complte all as specified including 10 mm thick POP (Gypsum anhydrous) board of size 1800mm x 1200 mm to flate surface over metal frame work and reinforced with cellulose fibre at different height or level to provide seamless finish complete all as specified and dirrected
Supply & Fixing factory made 100% Solid WPC ( Wood Polymer Composite ) - Door Frame 90mm x 45 mm ( Moulded ) Single Rebated made from Wood Polymer Composite ( Single Extruded Process ) material comparising of virgin PVC polymer of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and Natural Fibers ( Wood Powder/ Rice Husk/ Wheat Husk ) and Non toxic additives fabricated with meter Joints after applying PVC solvent Cement & screwed with full body treaded star headed srews having minimum frame density of 780 kg/ cbm & an ISO 9001 - 2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of ( Min. 990 N ), Minimum Compressive Strength of 58 N/mm2, Modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite / borer proof , water / Moisture elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite / borer proof , water / Moisture Proof & Fire retardant & Fixed in position with SS Dash Fasteners / Hold Fast of required dia and length, , all as per specifications drawings as directed by the Engineer-In-Charge. Material test certificate and authentication should be compulsory provided by the manufacturing company ( Hold Fast or Dash Fasteners shall be paid separately )
Supply & Fixing Factory Made 100% Solid PVC Flush Door Shutter 28 mm thick, made from Co-Extruded three-layer rigid PVC foam sheet ( Single Extruded ) with density not less than 600 kg/cbm outer layer (0.8-1mm) thick should be of rigid PVC with density of not less than 1400 kg/cbm manufactured by an ISO 9001-2015 certified company. Both of Surface to be laminated with 0.12MM thick PVC film with suitable adhesive. Door should be water Proof, Termite Proof, Fire Retardant & having good screw holding capacity
S&F 150 mm double action spring hinges, mild steel with steel wire spring stove enamelled black complete all as specified and directed by Engr-in-Charge.
S&F 19 mm thick medium density flat pressed three layer particle board exterior grade quality with 5 mm thick teak wood edging on one side bottom and top and other side 10 mm teak wood edging with rebate suitable for cup board shelf and partition complete all as specified
S&F SS grating stainless stell (SS 304) grating for drain cover size 1000x226x30 mm rectugular shape electro polishing, cross bar ptich 30 mm bearing bar pitch 30 mm, mesh 30x30mm in 2 mm thick, outer frame made of SS flat 30x3 mm complete all as specified and directed by Engr-in Charge.
S&F carbon steel PNG/LPG gas pipe line of thickness 6 mm, pressure 40 PSI, to be installed by expect of company accordance with GGL competent authority.
Taking down carefully old copper/aluminium point wiring (light, fan, socket, bell or power) complete including all electrical fittings & fixtures (DBs, submain,cables etc) and making good disturbed surfaces of wall, floor etc and matching wth original colour of wall all as specified
Taking down carefully electric meter by disconnecting all electric connection and kept at site and refixing the same after completion of wiring including suitable concealed pressed steel box 175mm x100 mmx60mm with BL sheet connecting of electric connection all as specified and directed by Engr-in-charge
Taking down & re-fixing the same after completion of wiring including connecting of electric connection of ceiling fan/exhaust fan with three core copper flexible wire 23/0.0076 complete all as directed .
M&L for one light/fan/exhaust fan point wiring controlled by one switch with PVC insulated unsheathed multi stranded copper conductor (FRLS) of size 1.5 Sqmm (for Phase colour code Red and for Neutral colour code Black) and one run of size 1.5 Sqmm PVC insulated unsheathed multi stranded copper conductor (FRLS) (as earth wire, colour code green) and connected to common earth dolly all as specified, drawn through in and including concealed PVC Conduit medium grade, ISI marked not less than 19.5 mm / 20 mm dia along with conduit fixing accessories and with pressed steel terminal box for mounting of modular inner plates of thickness 1.6mm thick terminal boxes concealed on wall/fllor/ceiling, including making good of disturbed surfaces of wall/ceiling/floor in same specification as per existing one and white wash/colour wash all as specified and as directed by Engineer- in- Charge.
All as per Item No 154 hereinbefore but for One 5 A socket outlet on independent Board all as specified and directed.
All as per Item No 154 hereinbefore but for One 5 A same Board all as specified and directed.
All as per item No 154 above but 2.5 sq mm wire for one 15 Amps socket outlet independent with continuous PVC insulated single core green colour copper earth wire of size 2.5 sq mm connected to common earth dolly.
Supply and fix Modular switch one way 6A 230V AC 50 HZ SP one module all as specified.
Supply and fix Modular switch one way 16A 230V AC 50 HZ SP one module all as specified.
Supply and fix Modular socket 2/3 pin combined 6A 230V AC 50 HZ SP two module all as specified.
Supply and fix Modular socket 6A/16A 2/3 pin combined 230V AC 50 HZ SP two module all as specified.
S&F ceiling rose, 3 phase/PVC/polycarbonate, isolated body three terminals all as specified
S&Fixing in Replacement lamp holder bakelite with back plate suitable for batten fittings all as specified
S&F ceiling fan modular regulator electronic Stepped type for 1200/1400 mm sweep two module.
Supply and fixing in repairs LED tube light along with fixture including one number of 20 watt 4' LED tube complete all as directed by Engr-in-Charge.
Supply and fixing in repairs LED bulk head light fitting 10 Watt complete all as directed by Engr-in-Charge.
Supply and fix in Repair of 12 W LED (2 ft) integrated tube light fitting with in-built driver suitable fitting including modification to fitting internal wiring all as specified and directed.
Supply and fixing in repairs inner plate & white cover plate with frame, 1 modules complete all as specified and directed.
Supply and fixing in repairs inner plate & white cover plate with frame, 2 modules complete all as specified and directed.
Supply and fixing in repairs inner plate & white cover plate with frame, 3 modules complete all as specified and directed.
Supply and fixing in repairs inner plate & white cover plate with frame, 6 modules complete all as specified and directed.
Supply and fixing in repairs inner plate & white cover plate with frame, 8 modules complete all as specified and directed.
Supply and fixing in repairs inner plate & white cover plate with frame, 12 modules complete all as specified and directed.
Supply and fixing in repairs LED street light fitting 1 x 35/36 watt, water proof confirm to IP-65 including one number MS clamps made of 25x3 mm flat iron with bracket of Gl pipe light grade 25 mm dia and length not less than 1.2 mtr end of Gl pipe suitable for street light fitting, connecting with three core copper flexible wire 23/0,0076.all as specified and directed.
Supply and fix MCB DB SPN 4 way 230 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate and necessary civil works all as specified and directed.
Supply and fix MCB DB SPN 8 way 230 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate and necessary civil works all as specified and directed.
Supply and fix MCB DB TPN 4 way 230 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate and necessary civil works all as specified and directed.
Supply and fix MCCB DB VTPN 12 way double door type suitable for TP/FP including necessary dummy plate and necessary civil works all as specified and directed.
Supply and fix MCB SP 230V, 6-32 Amps capacity all as specified and directed.
Supply and fix MCB SPN 230V, 6-32 Amps capacity all as specified and directed.
Supply and fix MCB TPN 415V, 32 to 63 Amp capacity all as specified and directed.
Supply and fix MCB TP 415V, 32 to 63 Amp capacity all as specified and directed.
Supply and fix MCCB FP 415V, 160 Amp 25K capacity all as specified and directed.
Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 4 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 4 Sqmm drawn through and including PVC concealed Conduit pipe 20 mm dia with all fittings all as specified and directed.
Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 6 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 6 Sqmm drawn through and including PVC concealed Conduit pipe 20 mm dia with all fittings all as specified and directed.
Material and Labour for Submain wiring with 4 runs of FRLS grade PVC copper conductor cable 16 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 10 Sqmm drawn through and including concealed PVC Conduit pipe 25 mm dia with all fittings all as specified and directed.
Supply and fix single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one 20amps SPN MCB all as specified and directed.
M&L for earthing complete with galvanised steel earth plate electrod 60cmx60cmx6mm thick burried directly in ground (earth) pit not less than 2.25mtr below normal ground (level) connected to and including using galvanised iron strip 25x4mm as earthing lead by means of bolts nuts check nuts and washers of galvanaised iron or steel including PCC pit in 1:2:4 type B-1 RCC cover with suitable handle and angle iron 40x40x5mm frame, excavation and earth work in any type of soil, medium grade Gl watering pipe 20mm bore with funnel and wire mesh and light grade protetion pipe 15mm bore upto main board complete as shown on electrical plate No 5 of MES Sch 1991 (part-1) and testing and completion.
S&F Exhaust fan 450 mm sweep steel body incl cutting wall for hole of exhaust fan and making good the surface finishing and maching with the existing wall all as specified and directed.
Replacement repairs of of stationery storage type electric water neater storage capacity 50 Its BEE 5 star rated operated on 230 volts AC Vertical type working pressure 0.8 Mpa with multi funtion saftry valve and PUF installation including 4 Nos full threaded fastener of size 100x10 mm with two washer water connection with two no flexible steel hose pipe of size 15 mm 450 mm lengh and suitable plug top of 15 Amp capacity including required pipe connection with the pipe line of internal water supply.
Replacement repairs of of stationery storage type electric water heater storage capacity 25 ltrs BEE 5 star rated operated on 230 volts AC Vertical type working pressure 08 Mpa with multi funtion saftry valve and PUF installation including 4 Nos full threaded fastener of size 100x10 mm with two washer water connection with two no flexible steel hose pipe of size 15 mm 450 mm lengh and suitable plug top of 16 Amp capacity including required pipe connection with the pipe line of internal water supply.
Replacement / repairs of ceiling fan 26V,1200 mm sweep BLDC, BEE 5 star rated with remote and all accessories including electrical connection with required wire complete all as specified and directed. Note: Retrived old items shall be hand over MES.
Replacement/ repair of wall mounting fan of size 400 mm sweep, AC single phase 230V, 50Hz including wall brackts complete Note: Retrived old items shall be hand over MES.
Cutting chases in concrete wall/stone for laying PVC conduit and making good to facings where required and pointing in cement mortar 1:3, and making good, cutting not exc 20 cm girth and including PVC Conduit 25 mm dia all as specified and directed by Eng-in-Charge.
S&F Call Bell all as specified and directed by Eng-in-Charge.
S&F Recess Mounting Ceiling light fitting 1x1 of 18 W in white colour all as specified and directed by Eng-in-Charge
Supply and fixing in repair decorative LED fancy wall mounted lighting fixture 9W-10W single bracket including bulb with required electrical connection all as per Engg in charge.
Supply and fixing in repair decorative LED fancy wall mounted lighting fixture 9-10 W Double bracket including bulb with required electrical connection all as per Engg in charge
jayanti associates
rajan construction
GIAN ENGINEERS
M/s Vatsh Raj and co
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .