CERTAIN DAY TO DAY B/R REPAIRS INCLUDING REPLACEMENT OF SANITARY FITTINGS,PLUMBING FITTINGS AND FIXTURES,JOINERY ETC OTM ACCN OF RRC FORT AREA ,MAUDE LINE AREA,MH AREA,ASC,RRC TRG AREA,TA BN AREA AT FATHEGARH CANTT.

Amount

Dismantiling of floor, hearth or wall tiling including cement mortar bedding (but not baking), removing rubbish off the premises etc complete all as specified and directed.

M & L for vitrified ceramic light shade tiles 8-10mm thick (square or rectangular) polished area of each tile not exc.0 .36 sqm in floor and shall be jointed in neat cement slurry and pointed in paste pigmented to tile shade complete laid with and including over screed bed or bedding layer of mortar cement mortor (1:6) , 15mm thick ,complete all as specified and directed

...ditto...as above but as in vertical surfaces fixed over 10 mm thick rendering in cement mortor (1:4)....ditto...

M&L non-skid ceramic tiles 8mm thick (square/rectangular) area of each tile (400 x 400)mm in floors coloured tiles etc set and jointed in neat cement slurry and pointed in white or coloured cement to match etc laid over screed bed or bedding layer of mortar cement mortor (1:6) & including 15mm thick ,complete all as specified and directed.

M&L glazed ceramic coloured tiles 300mmx200mmx 6to 7 mm thick as in vertical surfaces set and jointed in neat cement slurry and jointed or coloured cement to match etc complete laid over screed bed or bedding layer of mortar cement mortor (1:6) and including 15mm thick ,complete all as specified and directed.

M&L for 20mm thick granite stone of colour as approved table rubbed & polished laid, bedded, set and joointed in neat grey cement slurry in plate forms etc and pointed with white cement including cutting made to required shape and edges round shape as required and design etc complete all as specified and directed.

M&L 20-25 mm th machine cut kota stone slab as in flooring over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing, with and including over 20 mm thick screed or bedding layer in cement mortar (1:4) all as specified and directed.

M&L Coloured Chequered cement concrete tiles (25cm x 25cm x 25mm) thick with grey cement and pigment, set, jointed and pointed in neat cement slurry in paving/path etc with and including over 20 mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.

M&L grinding the old kota/marble stone work with machine grinder as in floors/walls and treating the surface with weas wax polish compete all as specified and directed.

M&L in repair for snap grid flase ceiling with Vinyl coated Gypsum Tile (600mmx600mmx9mm) with grid 24mm (GI sheet frame work with rolled section as per manufacturer's requirements including suspenders required for the fixing/hanging at required height as per EIC complete all as specified and directed . Make : Armstrong/EVEREST or Equivalent make approved by the GE.

Dismantling of GI sheet (Corrugated or semi Corrugated etc) sheet in roof covering including wind tie etc complete all as specified and directed.

M&L for Pre painted zink coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering , fixed with self taping screw complete all as specified and directed by Engr In Charge.

M&L for Pre painted zink coating GI based corrugated steel sheet 0.50 mm thick ( except GI sheet ) of any colour having tensile strength of 550 Mpa as in roof covering , fixed with self taping screw complete all as specified and directed by Engr In Charge.

Taking down cement plaster on brick work or concrete surfaces including racking out joints etc complete all as specified and directed.

Demolition of brick work built in cement mortar or cement lime mortar etc complete all as specified and directed.

M&L for brick work with sub class 'B' bricks using old size bricks straight or curved on plan exc 6m mean radious built in cement mortor (1:6) etc complete all as specified and directed.

M & L Brick work using old size bricks (Except brick) straight or curved on plan exc 6 m mean radius built in cement mortar (1:6) complete all as specified and directed. Note:- Old retrived brick obtain in serviceable condition from demolistion shall be used in work

M&L for 15mm thick rendering in cement mortor (1:6) on brick work or concrete surfaces finished even and smooth etc complete all as specified and directed.

M & L for 15mm thick rendering or brick work or concrete surface in cement mortor (1:4) finished even & smooth without using extra cement all as specified.

M&L hacking out old broken glass any thickness/ size from wooden/mental frame, glazed with putty or fixed with beading etc complete all as specified and directed.

S&F 3.00mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane etc complete all as specified and directed.

S&F in repair water tubes medium grade bore of tube in 15mm galavanised with all fitting laid in trenches, walls, ceiling or laid in floors etc complete all as specified and directed.

S&F in repair water tubes medium grade bore of tube in 20mm galavanised with all fitting laid in trenches, walls, ceiling or laid in floors etc complete all as specified and directed.

Taking down chowkhats incl shutters (without taking off shutters from the frame) n.exc 1.5 sqm each etc complete all as specified and directed.

Taking down chowkhats incl shutters (without taking off shutters from the frame) exc 1.5 sqm and n'exc 4.00 sqm each etc complete all as specified and directed.

Taking down shutterrs exc 1 sqm and n exc 2.00 sqm each etc complete all as specified and directed.

S&F factory made 35 mm thick 2nd class hardwood(SAL) Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), supplied and fitted to chowkhats complete all as spfd and directed.

S&F factory made 2nd class hard wood ( SAL) 30mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8 all as specified and directed.

S&F mild steel framed work of angle or any other section (grade 410 - 0 or Fe 310-0) as in door and door frame, gates of angle frame work etc including necessary welding etc complete all as specified and directed.

S&F 125 x 60 mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, all as specified and directed.

M&L cement concrete type C-0, (1:3:6 ) ( using 12.5mm stone aggreage ) as in filling inside pressed steel chowkhats , complete all as specified and directed.

S&F for Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars , dovetailed or welded all as specified and directed.

S&F for Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with out glazing bars , dovetailed or welded all as specified and directed.

S & F MS work as in widnw guard bars, plain, let in and fixed independently in wooden frames etc, and similar articles conforming to Fe 290 Gde E 165 complete all as specified and directed

S&F solid PVC door frame of size (50mmx47mm) made out of 5mm plain colour PVC sheet reinforced with MS square tube and fixing in opening all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width & stuck inside with solvent cement for stile and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, suppling & fixing in the frame at site as per specification & drawing etc complete all as specified & directed.

Demolition of PCC in Ground floors/PCC Path/Plinth Protection and paving n.exc 15cm thickness (below or above ground level) etc complete all as specified and directed.

S & F stainless steel butt hinges cold rolled of size 100mm medium weight all as specified and directed.

S & F stainess steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples, wodden beads to aluminium/steel windows & doors all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section of 125mm size etc complete all as specified and directed.

S&F aluminium handles, cast type anodised of size 125mm etc complete all as specified and directed.

S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed etc complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned tacks or galvanised wire staples etc complete all as specified and directed.

S&F butt hinges medium grade cold rolled 100mm mild steel and fixed etc complete all as specified and directed.

M&L for two coats of cement base painting over a coat of primer on newly plastered surfaces of wall incl preparation of surfaces complete all as specified and directed. Note: Subssequent coat shall be applied as directed by Eng-in-charge after the approval of coat.

M&L for preparation of new plastered surfaces of walls and applying two coat of oil bound distemper over a coat of chalk whiting on plastered surfaces preparatory to distempering complete all as specified and directed. Note: Subssequent coat shall be applied as directed by Eng-in-charge after the approval of coat.

M&L for prepration of newly wooden surface over 10cm width or girth and applying two coats of syntheic enamel paint etc complete all as specified and directed. Note: Subssequent coat shall be applied as directed by Eng-in-charge after the approval of coat.

M&L for prepration of newly steel surface over 10cm width or girth and applying two coats of syntheic enamel paint etc complete all as specified and directed. Note: Subssequent coat shall be applied as directed by Eng-in-charge after the approval of coat.

S&F in repair 32mm bore PVC flush pipe polyethylene for low level flusing cistern etc complete all as specified and directed.

S&F grating doom 125mm dia with waste hole of PTMT (Min wt 40gms) etc complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks, triple layer ,white (cylindrical vertical with closed up, capacity in 500 Ltrs, hoisted and fixed in position with all fittings and fixtures including float valve 20 mm bore in position complete all as specified in SSR Part-I. include is dismantling of existing water tank etc complete all as specified and directed. conforming to cart part No CCWS 0050-02-TLW of sintex or equivalent to specified make.

S&F rotational moulded polyethylene water storage tanks, triple layer ,white (cylindrical vertical with closed up, capacity in 1000 Ltrs, hoisted and fixed in position with all fittings and fixtures including float valve 20 mm bore in position complete all as specified in SSR Part-I include is dismantling of existing water tank etc complete all as specified and directed. conforming to cart part No CCWS 0100-01-TLW of sintex or equivalent to specified make.

S&F in repairs vitreous china wash basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or eracting stand & waste pipe, coupling etc complete all as specified and directed.

S&F in repair low level flushing systern PVC valveless syphonic action type, 10 ltrs capacity complete all as specified and directed.

Supply & fixing in repairs vitreous china squatting pan “Orissa Pattern” of size 580mm x 440mm, white with, integral foot rests front or back inlets including lime concrete bedding complete all as specified and as directed by Engr-in-Charge etc complete all as specified and directed.

S&F in repair mild steel 300mm , ordinary rat tail rod pattern springs including roller plate etc complete all as specified and directed.

S&F in repairs stop valve, bore of dia 15mm of PTMT any colour high pressure screwed for iron pipe and fixed etc complete all as specified and directed. MAKE : Prayag.

S&F in repair Chromium plated bib tap cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe and fixed to 15mm bore pipe complete all as specified and directed.

S&F in repair Cast iron bib tap crutch or butter fly handle screwed down screwed for iron pipe and fixed to 15mm bore pipe complete all as specified and directed.

S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mm etc complete all as specified and directed.

S&F in repairs Shower rose 15mm size, 195mm long with bend of 45 degree with flange of PTMT any colour (Min wt 40gms) etc complete all as specified and directed.

S&F in repair Float valve 20mm size, of PTMT any colour with all fittings and fixtures etc complete all as specified and directed.

S&F in repair Float valve 25mm size, of PTMT any colour with all fittings and fixtures etc complete all as specified and directed. MAKE : Prayag.

S&F in repair Vitrous China urinal flat back (465x355x265)mm inluding waste pipe, waste coupling etc complete all as specified and directed.

S & F in repair PVC ( SWR pipe ) 110 mm bore rain water pipe including PVC/MS clamp and making good the disturbed surfaces in cement mortor (1:4) or PCC (1:2:4) type B-1 complete all as specified and directed.

S & F in repair PVC ( SWR pipe ) 150 mm bore rain water pipe including PVC/MS clamp and making good the disturbed surfaces in cement mortor (1:4) or PCC (1:2:4) type B-1 complete all as specified and directed.

S&F in repair PVC (SWR) bends of radius110 mm complete all as specified and directed.

S&F in repair PVC (SWR) bends of radius150 mm complete all as specified and directed.

S&F in repairs pillar tap 15mm bore brass chromium plate with or without lettered Hot or cold with long screwed shanks and fly nuts, capston head screwed for iron pipe complete all as specified and directed

Removing existing water proofing treatment of any type all as directed by Engineer-in-charge and disposing off out side Defence Land, Cleaning the surface by roughening, sweeping clean and washing down and applying cement slurry @ 3 kgs/sqm & M&L for 40mm thick cement concrete 1:2:4 type B-0 (12.5mm graded stone aggregate) as in RCC roof surface with mixing of water proofing compound 3% by the weight cement to horizontal or vertical surfaces finished cement concrete surface even and smooth using extra cement including necessary form work all as specified and directed.

M&L applying water proofing treatment to roof slabwith APP modified polyeric membrane with centre core 100 micron HMHDPE out film 20 micron each having thickenss 3 mm , weight not less than 3.00 kg/Sqm with 100 mm side overlapand 150 mm end lapand laid with following course of descritiopn below:- (a) Applying evenly a coat of bituminous primer conforming to IS 3384-1965 @ 0.50 ltr/sqm prepared surface till the surface is properly impregnated and solvent oil in primer shall be allowded to evaporate completely. (b) Second caot of bonding material using hot blown grade bitumen 85/25@ 1.2 kg/Sqm conformoing to IS 702-1988 over bituminous primer . (c) third course i:e laying APP Modififed polymeric membrane describe hereinbefore with 100 mm overlap in longitudinal direction and 100 mm in traverse direction , (d) Fourth course of bonding material using hot blown grade bitumen 85/25 conforming to IS 702-1988 @ 1.2 Kg/Sqm over membrane. (e) Fifth course is sprinkling a layer of course sand dusting @ 1kg/Sqm as directed.

M&L for cement concrete (1:2:4) type B-1 using ( 20mm graded stone aggregate) as in coping bands and benching of manholes etc including slightly rounded or chamfered angles including necessary form work complete all as specified.

M&L PCC type C-2 (1:3:6) (20mm stone graded aggregate), 50mm thick as in Plinth Protection finished even and smooth etc without using extra cement complete all as specified and directed.

M&L cement concrete type D-2, (1:4:8) ( using 40mm stone aggregate ) as in foundations, filling and mass concrete complete all as specified and directed.

M&L for sand filling under floor including watering and consolidation complete all as specified and directed

Machine pressed precast concrete interlocking paver block vibrator finish any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with gery cement and pigment , over 20 mm thick sand filling complete all as specified and directed.

M/s Moti Babu Agarwal