Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.2 LAccepted-AOC D 662 WZ 1598 R 1 NANGAL RAYA NEW DELHI 110046 | NEW DELHI | NEW DELHI | DELHI | 110046 | L1 | Accepted-AOC AOC | |
| 2 | L2₹22.6 L+₹84,348 (3.87%)Rejected-Finance | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹22.7 L+₹91,464 (4.20%)Rejected-Finance | L3 | Rejected-Finance Other than lowest bidder | |
| 4 | L4₹25.0 L+₹3.2 L (14.6%)Rejected-Finance 110059 NEW DELHI NATIONAL CAPITAL TERRITORY OF DELHI 110059 | WEST DELHI | DELHI | 110059 | L4 | Rejected-Finance Other than lowest bidder | |
| 5 | L5₹32.2 L+₹10.4 L (47.8%)Rejected-Finance N A | FARIDABAD | HARYANA | 121004 | L5 | Rejected-Finance Other than lowest bidder |
| Sl No | Description | Qty | Unit | V r traders L4 | M/S SURINDERAS CONSTRUCTION CO. L2 | friends associeates L5 | shiva enterprises L1 | M/S DABAS CONSTRUCTIONS L7 | innovision limited L6 | Paradise Interior L3 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Demolition of brickwork or stone/ boulders masonry built in cement or cement lime mortar including all quions, arches, pillars, etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and directed. | 276 | Cum | 49 ₹13,524 | 25 ₹6,900 Lowest | 200 ₹55,200 | 51 ₹14,076 | 300 ₹82,800 | 35 ₹9,660 | 30 ₹8,280 |
| 2.00 | Excavation in trenches, n exc 1.5m wide and n exc 1.5 in depth for foundation etc or for shafts, wells cesspits manholes, pier holes, etc n exc 10 sqm on plan and n exc 1.5m on plan and n exc 1.5m depth and getting out in soil/ mud from existing drain including removal of RCC cover from position complete all as specified and directed. | 198 | Cum | 109 ₹21,582 | 150 ₹29,700 | 200 ₹39,600 | 111 ₹21,978 | 160 ₹31,680 | 60 ₹11,880 Lowest | 80 ₹15,840 |
| 3.00 | Demolition of cement concrete unreinforced of any descriptioin and in any position not other wise specifically provided complete all as specified and directed. | 52 | Cum | 49 ₹2,548 | 25 ₹1,300 Lowest | 200 ₹10,400 | 51 ₹2,652 | 430 ₹22,360 | 100 ₹5,200 | 30 ₹1,560 |
| 4.00 | Demolition of reinforced cement concrete in any descriptioin and in any position not other wise specifically provided complete all as specified and directed. | 1 | Cum | 49 ₹49 Lowest | 200 ₹200 | 200 ₹200 | 111 ₹111 | 530 ₹530 | 500 ₹500 | 200 ₹200 |
| 5.00 | M&L for plain cement concrete type C-2 1:3:6 using 40mm graded crushed stone aggregate as in foundation filling and mass concrete complete all as specified and directed. | 100 | Cum | 1,149 ₹1,14,900 | 650 ₹65,000 Lowest | 2,000 ₹2,00,000 | 1,200 ₹1,20,000 | 3,100 ₹3,10,000 | 4,100 ₹4,10,000 | 900 ₹90,000 |
| 6.00 | M&L brickwork with subclass 'B' brick straight or curved on plan exc 6m mean radius, built in, built in cement mortar 1:4 complete all as specified. | 256 | Cum | 2,199 ₹5,62,944 | 1,500 ₹3,84,000 Lowest | 3,000 ₹7,68,000 | 2,222 ₹5,68,832 | 4,300 ₹11,00,800 | 4,925 ₹12,60,800 | 2,000 ₹5,12,000 |
| 7.00 | All as per the description of srl No 6 above except brick (brick used obtained from demolition) | 20 | Cum | 699 ₹13,980 | 500 ₹10,000 Lowest | 1,200 ₹24,000 | 1,555 ₹31,100 | 2,100 ₹42,000 | 500 ₹10,000 Lowest | 800 ₹16,000 |
| 8.00 | M&L for providing plain cement concrete type 1:2:4, B1, using 20mm graded crushed stone aggregate in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm height, copings, kneelers, apex stones, bed plates, kerbs not provided for in water roughs and the like including weathering, slightly rounded or chamfered angles and throating as directed. | 25 | Cum | 2,799 ₹69,975 | 3,000 ₹75,000 | 3,500 ₹87,500 | 2,222 ₹55,550 | 3,600 ₹90,000 | 4,550 ₹1,13,750 | 1,750 ₹43,750 Lowest |
| 9.00 | M&L for cement concrete type 1:2:4 B-2, using 20mm graded crushed stone aggregate as in surface channels and drains complete all as specified and directed. | 33.75 | Cum | 2,799 ₹94,466.25 | 1,000 ₹33,750 Lowest | 1,500 ₹50,625 | 1,200 ₹40,500 | 3,800 ₹1,28,250 | 4,550 ₹1,53,562.5 | 2,200 ₹74,250 |
| 10.00 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed. | 1,000 | RM (Inner girth only measured) | 29 ₹29,000 | 35 ₹35,000 | 50 ₹50,000 | 21 ₹21,000 Lowest | 25.75 ₹25,750 | 50 ₹50,000 | 50 ₹50,000 |
Tender Value
₹43.5 L
EMD Value
₹89,920
Closing Date
2 Sept 2025, 6:00 pmClosed
GE NORTH DELHI CANTT10
GE NORTH DELHI CANTT10
SPL REPAIR FOR APPROX 1000 MTR OPEN DRAINAGE IN OTM BLDG NO T 1 AND T 5 AND JCOS OR GOVT MD ACCN BLDG NO P 1 P2 P3 P4 P5 P6 P15 P169 P170 AND P171 OF 505 ABW AND ADDN ALTRN TO KITCHEN ROOF TREATMENT SHED AND OTHER CONNECTED ITEMS IN BLDG NO P28 AT KI
2025_MES_724684_1
GE/North-53/2025-26
Open Tender
Civil Works
Item Rate
180 days
GE NORTH DELHI CANTT10
As per NIT
8 documents required · 8 mandatory
₹500
Yes
GE NORTH DELHI CANTT10
₹89,920
Yes
16 Mar 2026
5 Aug 2025
4 Sept 2025
5 Aug 2025
2 Sept 2025
19 Aug 2025
Amount
Demolition of brickwork or stone/ boulders masonry built in cement or cement lime mortar including all quions, arches, pillars, etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and directed.
Excavation in trenches, n exc 1.5m wide and n exc 1.5 in depth for foundation etc or for shafts, wells cesspits manholes, pier holes, etc n exc 10 sqm on plan and n exc 1.5m on plan and n exc 1.5m depth and getting out in soil/ mud from existing drain including removal of RCC cover from position complete all as specified and directed.
Demolition of cement concrete unreinforced of any descriptioin and in any position not other wise specifically provided complete all as specified and directed.
Demolition of reinforced cement concrete in any descriptioin and in any position not other wise specifically provided complete all as specified and directed.
M&L for plain cement concrete type C-2 1:3:6 using 40mm graded crushed stone aggregate as in foundation filling and mass concrete complete all as specified and directed.
M&L brickwork with subclass 'B' brick straight or curved on plan exc 6m mean radius, built in, built in cement mortar 1:4 complete all as specified.
All as per the description of srl No 6 above except brick (brick used obtained from demolition)
M&L for providing plain cement concrete type 1:2:4, B1, using 20mm graded crushed stone aggregate in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm height, copings, kneelers, apex stones, bed plates, kerbs not provided for in water roughs and the like including weathering, slightly rounded or chamfered angles and throating as directed.
M&L for cement concrete type 1:2:4 B-2, using 20mm graded crushed stone aggregate as in surface channels and drains complete all as specified and directed.
Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.
M&L for reinforced cement concrete 1:2:4 type B-1 using 20mm graded curshed stone aggregate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including formwork to sides and soffits of slabs n. exc. 200mm thick and similar works rough finished surfaces of concrete complete all as specified and directed. Note:- Reinforcement to be measured and paid separately.
M&L for provinding precast cement concrete, 1:2:4, type B-1, using 20mm graded curshed stone aggregate set in CM 1:4 as in landings, cover slabs for man holes etc, chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including necessary formwork. Note:- TMT bars to be measured and paid separately.
M&L for mild steel TMT bars 10mm dia as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia complete all as specified and directed.
M&L for reinforced concrete pipes, 200mm dia class NP2, laid and jointed complete with collars complete all as specified and directed
M&L for plain cement concrete bed 1:3:6, type C-2 to drain pipes of dia 200mm including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed Note:- The thickness of concrete bed shall be 15cm below the barrel of pipe and width of concrete bedding shall extend lateraly 15cm beyond either side of pipe.
M&L for reinforced concrete pipes, 300mm dia class NP2, laid and jointed complete with collars complete all as specified and directed
M&L for plain cement concrete bed 1:3:6, type C-2 to drain pipes of dia 300mm including packing under, and completely surrounding pipes with concrete after they are laid and tested complete all as specified and directed Note:- The thickness of concrete bed shall be 15cm below the barrel of pipe and width of concrete bedding shall extend lateraly 15cm beyond either side of pipe.
S&F in repairs 80mm thick manhole/drain covers of any size with and including frame medium duty factory made and test load 10 tonnes (MD-10), strength as per IS-12592 (2002), ISI marked including fixing complete to match the road/floor surface all as specified by Engr-in-Charge
Taking down existing cement plaster including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
M&L 15mm thick rendering on brick work or concrete surface in cement mortar 1:4 surface finished even and smooth without using extra cement complete all as specified and as directed.
M&L PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, 75mm bore as a weep holes complete all as specified and directed.
Cleaning of mud /silt / RCC debris /cement concrete debris and old brick/sotne bats etc from open/coverd drain, RCC/brick/hume pipe culvert etc of any capacity and depth/width by dewatering, taking out mud/sludge/liquid, getting out and removing & depositing the sludge outside the defence area complete all as specified and directed.
Mild steel conforming to Fe 410-0 or Fe 310-0 in framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; ladders; railings and similar work complete all as specified and directed.
M&L applying two coats of synthetic enamel paint on new steel surfaces of any description over 10cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete all as specified and directed.
M&L for laying of APP modified roof treatment over existing non-accessible RCC roof slab / chajjah / canopy / parapet of the membrane manufacturer with following specification etc complete all as specified and directed:- (a) removing and Cleaning existing damaged APP membrane from roof surface and clean all cement mortar and vegitation, plants with roots properly. (b) Applying oil bound bitumen primer @ 0.30 liter/Sqm manufacture by the same agency as that of APP with a density 0.87 to 0.89 Kg per litere at 25 degree centigrade on prepared surface. (c) Laying not less than 3mm thick APP modified water proofing membrane weighing not less than 3.00 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gms/Sqm using butane torch application with 10cm side laps and 15cm end lap over hot bitumen 85/25 grade @ 1.2 Kg/Sqm overbituminous primer before Laying of membrane. (d) APP membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap. (e) Top of membrane shall be provide with solar reflective bituminous aluminum paint as prescribed by manufacture of membrane.
M&L for 15mm thick rendering in cement mortar on fair faces of brick work or concrete surfaces, applied in two layers i.e. first layer of 10mm thick rendering in cement mortar 1:6 and 2nd top layer of 5mm thick rendering in cement mortar 1:4 mixed with liquid WPC finished even and fair etc complete all as specified and directed. Note:- The cost of liquid WPC is deemed to be included in quoted rate against this item.
M&L 10mm thick rendering in cement mortar 1:6 on faces of brick work or concrete internal surfaces of wall finished even and fair without using extra cement all as specified and directed.
M&L 5mm thick rendering in cement mortar 1:3 on concrete surfaces in ceiling, finished fair & even and smooth complete all as specified and directed.
M&L for preparation of new surfaces plastered or un-plastered of ceiling and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.
M&L for preparation of the newly plastered surfaces of walls and applying one coat primer & two coats oil bound distempering with, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.
M&L for preparation of new plastered surfaces of wall and applying two coat of cement based paint over a coat of cement primer
M&L for preparation of new or old plastered surfaces of wall and applying two or more coat of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489;2004, alkali & fungal resistance, dirt resistance exterior paint of required shadec company depot tinted with silicon additives @ 1.43 litre/10 sm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over new surface complete all as specified and directed.
Disconnecting existing tanks of capacity exc 500 Ltrs and n exc. 1000 ltrs, setting aside or lowering if required for rapairs, cleaning, etc and hoisting if required reconnecting and refixing in position. Cleaning repairing, etc measured separately.
M&L for cleaning and removing all scale and dirt, etc from tanks of capacity exc 500 & n exc 1000 ltrs and from mouths of circulating pipes etc.
S&F in repairs kitchen sink mixer 15mm dia CP brass fancy type including joints to steel pipe or unions all as specified. Make:- Jaquar Cat Part No ARI39309 or equivalent as approved by GE.
M&L glazed ceramic coloured tiles in vertical surface area of each tile 0.06 to 0.16 sqm each set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including rendering 10mm thick in CM 1:4 and finished rough, complete including dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises all as specified & directed.
M&L for non skid ceramic coloured tiles 7mm to 8mm thick joint free area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors or skirting over and including 15mm thick screed bed in cement mortar 1:6 set and jointed in neat cement slurry and pointed in coloured cement. all as specified and directed
M&L granite 20mm thick colour as approved of any type work table rubbed and polished in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shed of granite over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.
M&L granite 20mm thick colour as approved of any type work table rubbed and polished in for wall lining veneering to wall and including 10mm thick in cement mortar 1:3 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shed of granite complete all as specified and directed.
Taking down/dismantling old particle board or any board kitchen cabinet with wardrobe including fillets and making good disturbed surfaces all assessary complete all as specified and directed.
S&F factory made 18mm thick 100% solid WPC (wood polymer composite) plain board of required size comprising of virgin PVC resin of K value 57-60 (suspension grade), calcium carbonate and natural fibers (wood powders/ rice husk/ wheat husk) and Non toxic additives, made from extrusion process WPC foam sheet single extruded (inner) with density not less than 650 kg/cum certified company, having good screw holding capacity (screw withdrawal strength of 2000 N (face ) & 1100 N (edge ), minimum compressive strength of 50N/mm2, modulus of elasticity 850N/mm2 and resistance of spread of flame of class A category with property of being termite/ borer free. water/ moisture proof, fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws. All as per direction of Engineer-in-Charge, material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen & Cabinets.
S&F factory made 18mm thick 100% solid WPC (wood polymer composite) laminated board of required size comprising of virgin PVC resin of K value 57-60 (suspension grade ), calcium carbonate and natural fibers (wood powders/ rice husk/ wheat husk) and non toxic additives, made from extrusion process WPC foam sheet single extruded (inner ) with having minimum density not less than 650 kg/cbm having good screw holding capacity (screw withdrawal strength of 2000 N (face ) & 1100 N (edge ), minimum compissive of 50 N/mm2 , modulus of elasticity 850N/mm2 and resistance of spread of flame of class A category with property of being termite/ borer free. water/ moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws. All as per direction of Engineer -In-Charge, material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen and Cabinets.
S&F magnetic catches with steel body ‘H’ type, fixed to shutter complete all as specified and directed.
S&F 150mm dia oval shape brass handle cromium plated fancy type polished bright finish complete all as specified and directed.
S&F continuous piano hinges, brass, 30mm width of flaps (when open) complete all as specified and directed.
S&F 4 levers brass cupboard locks grade-I, size 65mm complete all as specified and directed.
S&F 150mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F stainless steel basket plain of size 50cm x 37cm x 10cm made of 4mm thick stainless steel wire approved quality with suitable arrangement for fixing telescope basket channel 11/25 inch length two way extruded MS galvanised over rollers of approved Make complete all as specified and directed.
S&F stainless steel thali basket 11-13 division of size 50cm x 37cm x 20cm made of 4mm thick stainless steel wire approved quality with suitable arrangement for fixing telescope basket channel 18/25 inch length two way extruded MS galvanised over rollers of approved make complete all as specified and directed.
S&F stainless steel plate basket 11-13 division of size 50cm x 37cm x 16cm made of 4mm thick stainless steel wire aproved quality with suitable arrangement for fixing telescope basket channel 18//25 inch length two way extruded MS galvanised over rollers of approved make complete all as specified and directed.
S&F stainless steel partition basket of size 50cm x 37cm x 16cm made of 4mm thick stainless steel wire approved quality with suitable arrangement for fixing Telescope basket channel 18/25 inch length two way extrude MS galvanised over rollers of approved make complete all as specified and directed.
S&F stainless steel cutlary basket of size 50cm x 37cm x 10cm made of 4mm thick stainless steel wire and bottom of stainless steel perforated sheet approved quality with suitable arrangement for fixing Telescope basket channel 18/25 inch length two way extruded MS galvanised over rollers of approved make complete all as specified and directed.
S&F stainless steel basket plain of size 50cm x 37cm x 16cm made of 4mm thick stainlees steel wire approved quality with suitable arrangement for fixing telescope basket channel 18/25 inch length two way extruded MS galvanised over rollers of approved make complete all as specified and directed.
S&F stainless steel bottol full out of size 50cm x 40cm x 16 cm in two tier made of 4mm thick stainlees steel wire approved quality with suitable arrangement for fixing Telescope basket channel 18/25 inch length two way extruded MS galvanised over rollers of approved make.
S&F telescope basket/drawar channel 18/25 inch length extruded MS galvanised over rollers of approved make complete all as specified and directed.
S&F stainless steel 1mm thick sinks with drainage board made of kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar including fixing cantilever brackets connecting union to pipe and 32mm dia GI pipe duly painted upto Nihani trap or floor trap complete as directed at site, overall size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as specified and directed.
Excavating in post holes or similar holes each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, complete all as specified and directed.
M&L cement concrete 1:4:8 type D-2, 40mm graded curshed stone aggregate in foundations, filling and mass concrete as in sub base complete all as specified and directed.
S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
S&F rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates
M/S SURINDERAS CONSTRUCTION CO. (BID ID -3406089)
Paradise Interior (BID ID -3404438)
V r traders (BID ID -3406087)
friends associeates (BID ID -3406346)
innovision limited (BID ID -3401145)
M/S DABAS CONSTRUCTIONS (BID ID -3406688)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .