PROVN OF PATHWAY WITH INTERLOCKING TILE FOR STORE AREA AND OR BATHROOM AREA, HARDSTANDING AND SHED FOR GENERATOR SET NEAR OFFICER MESS, SHED FOR COOK HOUSE OF COSA HQ, WASHING PLATFORM FOR B VEHICLE AND WATER POINT AT NAYA RAIPUR MIL STN

Amount

Excavation over areas, n exc 1.5m deep and getting out in soft or loose soil complete all as specified and as directed.

M & L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

M&L for hardcore of broken stone or boulders of gauge n exc 63mm, depostied, spread and leveleed in layers n. exc 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L for 100 mm thick cement concrete type D2 1:4:8 using 40mm graded aggregate as in sub base finished even and rough complete all as specified and as directed.

M&L for Providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges of cement concrete type B0 1:2:4 using 12.5 mm stone aggregate complete all as specified and directed.

M&L for sand filling under floors complete all as specified & as directed.

Supply and fix machine pressed precast concrete interlocking paver block any shape and size with gray cement & pigment confirming to IS 15658-2006 of 60 mm thickness M-35 Grade complete all as specified and as directed.

Removing excavated soil n exc 50 m distance depositing where directed at a level n exc 1.5m above the stating point complete all as specified and as directed .

M&L for 100 mm thick Plain cement concrete 1:2:4 type B1 ( using 40 mm graded Stone aggregate) as in floors finishing cement concrete surface even and smooth with using extra cement including laying in alternate bays using thermocol strips 12mm th and 40mm wide all as specified and directed complete all as specified.

Forming 12mm thick expansion joint filled with preformed bituminous filler and top 30mm primed and sealed with sealing compound grade "A" in 100 mm thickness of concrete slab complete all as specified and directed.

Excavating in post holes in soft/loose soil (or similar holes) each n exc 0.5 cu.m. getting out, returing, filling in and ramming earth or broken ruble mixed with earth around, in layers not exceeding 25 cm , watering, and removing surplus soil to a distance n exc 50 M and making good surface complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 using 40mm graded stone aggregate in foundation, filling & mass concrete complete all as specified and directed.

S&F steel work in tubular trusses, purlins, rafters, posts etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I,S 1161-1998 grade St-240 complete all as specified and directed.

S&F plates (plain or chequred) channels, square cut or notched (ordinary and counter sunk) forming holes with riveted, bolted or welded attachment of Fe 410-W (Gde E-250) quality A complete all as specified and directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hesagonal or square nut ,n.exc. 5cm and n.exc 10 cm long of diameter of neck in 16 to 20mm complete all as specified and direted.

S & F pre-painted galvalume aluminium zinc coating G I based corrugated/semi corrugated sheets 0.5mm thick ofany colour having tensile strength of 550 mpa as in roof covering/cladding to wall,fixed with self tapping screws complete all as specified and directed

M&L for preparation of new steel surfaces and applying two coat of synthetic enamel paint over a coat of red oxide primer over 10cm width or girth etc all as specified.

M&L for brickworkwith sub class 'B' moduler size brick built in CM 1:6 straight on curved on plan exc.6m mean radius complete all as specified and directed..

M&L for rendering 10mm thick on fair face of brick or concrete surfaces in cm 1:4 finished even and smooth with out extra cement all as specified and directed.

M&L for glazed ceramic coloured tiles 350 x 250x 7mm/450x350x7 mm thick on vertical surfaces such as skirting dados set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in CM (1:4). Complete all as specified & directed

M&L for PCC type B-0 (using 12.5 m graded stone aggregate )as in coping etc all as specified.

Excvation in trenches,n.exc 1.5 m wide,and n.exc 1.5 m depth for foudation in soft /loose soil complete all as specified and directed.

M&L PCC in foundation type E2 (1:4:8) with 40mm graded aggregates complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

M&L for sand filling under floor spreading lavelingering and well ramming in layers n, exc 25 cm thick complete all as specified and directed. .

M & L for rendering 15 mm thick on fair faces of bricks/concrete surface in cement mortar (1:6) on wall finishing the surfaces even and smooth without using extra cement complete all as specified and directed. .

M&L for 100mm thick PCC 1:2:4 Type B-2 (40mm graded aggregate as in washing platform finished cement concrete surface even and smooth with using extra cement all as specified

M&L for RCC 1:1.5:3 using 20 mm graded aggregate as in slab etc all as specified and directed.

Use & Waste for form work to soffits of suspended concrete slabs for rough finished flate surface complete all as specified and directed. .

M & L for mild steel TMT bars 8 to10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. .

Supply and lay pipe galvanized, " Medium class" including fittings but 40mm (1.5") dia.

Supply and fix Gate Valves ( cr plated) of 40MM size

M&L PCC 1:3:6 type C1 using 20mm stone aggregate for coping of pipe and stay assembly completer all as directed

Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part of 2000 Ltr

Mterial and labour for cross arms, bracings, supports, clamps and back plates fabricated from from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one coat of red oxide primer and two coats of aluminium paint all as specified and directed.

ashish shrivastava

sanjay enterprises

RELIABLE PRODUCTS AND SERVICES

M/S INDIA ENTERPRISES

m/s ramanuj singh and sons