Periodical repair, maintenance, overhauling with providing and fixing of necessary consumable spares as per requirement for both Kirloskar make BHR-42 and BHR-54 model Vertical Turbine Pumps installed at Intake of IWSS, Lingaraj Area

Dismantlling, Lifting and Stacking of Kirloskar make BHR-42 & BHR-54 Vertical Turbine Pump & Motor Set complete with all its assesories and column pipes.

Fitting/Assembling, Lowering, Aligning, Installation and Commissioning of repaired Kirloskar make BHR-42 & BHR-54 Vertical Turbine Pump & Motor Set complete with all its assesories and column pipes.

Fabrication of new Suction Strainer as per sample available for both BHR-54 & BHR-42 Vertical Turbine Pump.

Fabrication and Installation of Rubber Expansion Bellow flange as per Size OD-620mm,ID-450mm,PCD-571.5mm,No.of Hole on one Side-20Nos. Of 23mm Dia,Length-370mm,Flange Thicknes-25mm including dismantlling of damagd one for BHR-54 VT Pump.

Dismantlling, Repairing of damaged and worn out inner surface of Pump Bowl housing using CI welding and machining work then fitting and installation work of both BHR-54 & BHR-42 Vertical Turbine Pump.

Dismantlling, Repairing of damaged and worn out inner surface of Pump Bell Mouth housing using CI welding and machining work then fitting and installation work of both BHR-54 & BHR-42 Vertical Turbine Pump.

Providing Hexagonal Head Nuts (As per ISO 4032/DIN 934, GR-8,Thread Fit IS:4218/2001), Bolts (As per IS 1364/2002, GR-8.8,Thread Fit IS:4218/2001) & Washers (22 X 100 mm).

Providing Hexagonal Head Nuts (As per ISO 4032/DIN 934, GR-8,Thread Fit IS:4218/2001), Bolts (As per IS 1364/2002, GR-8.8,Thread Fit IS:4218/2001) & Washers (22 X 110 mm).

Providing Hexagonal Head Nuts (As per ISO 4032/DIN 934, GR-8,Thread Fit IS:4218/2001), Bolts (As per IS 1364/2002, GR-8.8,Thread Fit IS:4218/2001) & Washers (22 X 130 mm).

Providing of Driver & Pump Coupling Pin, Rubber Bush ,Nut and Washer as per the sample for both BHR-54 & BHR-42 Vertical Turbine Pump.

Providing of Neoprene Rubber "O" Ring of size 574D × 4T-2 Nos. 352D×5.5T-1 Nos. 472D×5.5T-15 Nos. 209D×4T-1 Nos. for Pump Unit, Column Unit and Head Unit of both BHR-54 & BHR-42 VT Pump as per sample available.

Repairing of damaged and worn out surface of Ratchet Cover using M.S welding and grinding work of both BHR-54 & BHR-42 Vertical Turbine Pump.

Fabrication of Stainless Steel ASTM-A276 Type-410 Split Ring for Muff Coupling as per Sample available for both BHR-54 & BHR-42 Vertical Turbine Pump.

Checking of trueness of Impeller shaft,Intermediate shaft and Head Shaft on lathe in order to identify the runout and its rectification work of both BHR-54 & BHR-42 Vertical Turbine Pump.

Dismantlling and Repairing of worn out inner/outer surface and keyway of muf coupling using MS welding electrode and machining work of both BHR-54 & BHR-42 Vertical Turbine Pump.

Dismantling of damaged and fitting of new 2 Nos. Rubber Bearing for impeller shaft, pump side shaft sleeve and impeller shaft in pump bowl using lathe and hydraullic press for BHR-42 VT Pump.

Dismantling of damaged and fitting of new Rubber Bearing for intermediate shaft in spider, using lathe and hydraullic press for BHR-42 VT Pump.

Dismantling of damaged and fitting of new 2 Nos. Bowl Bearing for impeller shaft, pump side shaft sleeve and impeller shaft in pump bowl using lathe and hydraullic press for BHR-54 VT Pump.

Dismantling of damaged and fitting of new Transmission Bearing for transmission shaft in spider, using lathe and hydraullic press for BHR-54 VT Pump.

Repairing and rebuilding of worn out inner surface of spider using MS welding electrode and machining work for proper fitting of rubber bearing in BHR-42 and transmission bearing in BHR-54.

Providing and fixing of Spherical roller thrust bearing with stamped steel cage 29332E bearing for BHR-42 and BHR-54 Vertical Turbine Pump.

Repairing and rebuilding of worn out inner surface of Bearing Housing using MS welding electrode and machining work for proper fitting of Thrust Bearing in BHR-42 and BHR-54 Vertical Turbine Pump.

Making of key as per size and sample for Muff Coupling, Shaft sleeve and Distance sleeve for both BHR-42 and BHR-54 Vertical Turbine Pump.

Providing of Natural Fibre Gland Packing as per sample available for both BHR-42 and BHR-54 Vertical Turbine Pump.

Providing of Intermediate shaft sleeve of BHR-42 and Transmission shaft sleeve of BHR-54 Vertical Turbine pump using Stainless Steel ASTM A276 Type 410 BHN 250-280 as per the sample.

Providing of Transmission bearing or Thordon bearing for Transmission shaft of BHR-54 Vertical Turbine pump as per the sample.

Providing of Rubber bearing for Intermediate shaft of BHR-42 Vertical Turbine pump as per the sample.

Total impact of GST plus Labour Cess [@ 1 % (BOCW Cess to be deducted from the RA bill as per the value of the work progress)] for the purpose of CTC