Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.8 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹22.9 L+₹43,437.83 (1.94%)Rejected-Finance | L2 | Rejected-Finance Other than Lowest Bidder | |
| 3 | L3₹27.5 L+₹5.1 L (22.6%)Rejected-Finance | L3 | Rejected-Finance Other than Lowest Bidder | |
| 4 | L4₹28.8 L+₹6.4 L (28.3%)Rejected-Finance | L4 | Rejected-Finance Other than Lowest Bidder | |
| 5 | L5₹34.5 L+₹12.0 L (53.6%)Rejected-Finance | L5 | Rejected-Finance Other than Lowest Bidder |
Tender Value
₹40.0 L
EMD Value
₹79,900
Closing Date
16 Jan 2023, 6:00 pmClosed
CWE Jalandhar Cantt
HQ CWE Nalwa Road Jalandhar Cantt PIN-144005
Please refer tender documents
2022_MES_569742_1
8322/63/E8
Open Tender
Civil Works
Item Rate
180 days
Jalandhar Cantt
Class D Category a(i) for contractors enlisted with MES
8 documents required · 8 mandatory
₹500
AGE (I) Suranussi
₹79,900
Yes
3 Feb 2023
17 Dec 2022
23 Jan 2023
17 Dec 2022
16 Jan 2023
3 Jan 2023
Amount
Demolition of brick work built in cement mortar including all quoins, arches, pillars etc but including ashlar facings dressed stone work and pre cast concrete articles complete all as specified and as directed by the Engineer-in-Charge.
Demolition of cement concrete in ground floor and pavings not exceeding 15 cm thick above or below ground level.
M&L for brick work sub class 'B' bricks laid flat bedded and jointed in CM (1:6) and pointed in CM (1:3) complete all as specified and as directed by the Engineer-in-Charge.
All as per Item No 03 above but laid on edges complete all as specified and as directed by the Engineer-in-Charge.
M&L continuous brick edging with width equal to the depth of the brick, laid dry, on edge With burnt clay old size bricks sub class 'B' bricks complete all as specified and as directed by the Engineer-in-Charge.
Material and labour for brick work built in cement mortar (1: 6) with sub class ‘B’ bricks, straight or curved on plan exc 6 m mean radius, using old size bricks complete all as specified and as directed by the Engineer-in-Charge.
All as per Item No 06 above but Bricks only complete all as specified and as directed by the Engineer-in-Charge.
Taking down cement plaster of any description on brick or stone wall as in boundary wall etc, including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified & directed by the Engineer in Charge.
Material and labour for rendering 15 mm thick cement plaster in cement mortar (1:4) of brick / concrete surfaces finished the surfaces even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparation of new surfaces of walls including cornices, pilasters etc (Plastered or un plastered surfaces) and applying two of coats of cement base paint over a coat of alkali primer complete all as specified & directed by the Engineer in Charge.
Material and labour for plain cement concrete (1:3:6), type C-2 using 40mm graded crushed stone aggregate, as in surface channel complete all as specified and directed by the Engineer-in-Charge.
M & L 100 mm thick Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) as in PCC Floor and paving complete all as specified and directed by Engr - in - Charge.
M&L 25 mm thick Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engineer-in–Charge.
M & L Machine pressed precast conc. interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 grade with grey cement and with pigment complete all as specified and directed by Engr - in - Charge.
M & L Machine pressed precast conc. interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade with grey cement and with pigment complete all as specified and directed by Engr - in - Charge.
M & L Cement concrete 1:2:4 type B–1 using 20mm graded stone aggregates in copings,, including weathering, slightly rounded or chamfered angles and throating, as directed all as specified and directed by Engineer - in - Charge .
Dismantling of galvanised mild steel barbed wire of any description from fencing post (RCC/ Steel) complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repairs galvanised 2 strand steel barbed wire 2.24 mm dia , barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staple or steel pins etc complete all as specified and directed by Engr-in-Charge. (Each line wire to be measured)
All as per Item No 18 above here-in-before but restraining re-securing including making good staples etc. complete all as specified and directed by Engr-in-Charge. (Each line wire to be measured)
M & L 75 mm thick Cement concrete type D-2, 1:4:8 ( (40mm graded aggregate) as in sub Bases complete all as specified and directed by Engr - in - Charge.
M&L for Screed bed or bedding layer of mortar 20 mm thick in CM 1:6 for laying floor finishes complete all as specified.
M & L for chequered cement concrete tiles 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry and pigments as in floors complete all as specified and directed by Engineer - in - Charge .
Demolition Cement concrete (reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed by the Engineer-in-Charge.
Material and labour for precast cement concrete as in cover slabs (1:2:4) type B-1 (using 20mm graded crushed stone aggregates) set in cement mortar (1:6) complete after placing in position over septic tanks/manhole covers/drain covers complete all as specified and directed by the Engineer in Charge.
Material and labour for mild steel TMT bars 6 to 8 mm dia as in reinforcement cut to length, bent to shape including cranking bending, and binding with MS wire (annealed) not less than 0.9 mm dia complete all as specified and as directed by Engineer-in-charge.
All as per Item No 25 above but round bars 10mm dia Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde -E-165)
All as per Item No 25 above but 6 to 8 mm dia as in stirrups complete all as specified and as directed complete all as specified and as directed by the Engineer-in-Charge.
M&L providing precast cement concrete louvres and jallies, with RCC post 50 mm thick (measured solid), type B-0(1:2:4) using 12.5mm graded aggregate including all mould- ings but excluding frame set in cement mortar 1:4 complete all as specified and directed by Engr-In-Charge
Dismantling posts or struts embedded (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground
M&L Providing reinforced cement concrete type B-l, 1:2:4 (20 mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area n exc 100 sq. cm with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed complete all as specified and directed by Engineer-in Charge.
All as per Item No 30 above but exc 100 and n exc 250 sq. cm complete all as specified and directed by Engineer-in Charge.
All as per Item No 30 above but exc 250 and n exc 400 sq. cm complete all as specified and directed by Engineer-in Charge.
M&L Plain Cement concrete 1:3:6 type C-2 (using 40mm graded aggregate) as in foundations, filling and mass concrete complete all as specified and directed by Engineer-in Charge.
Dismantling wooden boarding, any description, fixed in any position with nails as directed.
Supply and fixing informatory Sign board of size 1200 mm x 900 mm made of aluminium sheet 2 mm thick with stainless steel rectangular frame using 25 x 15 mm rectangular pipe with 35 mm dia stainless pipe in outer border all around retro reflective high intensity 400 micron thick yellow colour sheet pasted with heating process on both bsides of the board including 75 mm to 100 mm high black colour letters cut to shape with special plotter and in proper manner incidating Shed No as directed by Engr in charge .02 Nos 75 mm dia stainless steel pipes of 304 grade glossy finish with MS plate 3 mm thick welded at bottom of pipes shall be provided the board shgall be fixed at height of 3.0 mm (top level of board) above GL and shall be embedded in ground using PCC 1:2:4 type B-1 of min size 300mmx300mmx600mm including necessary from work.excavartion and earthbwrk complete all as specified and directed.
Dismantling fencing wire mesh, any type complete all as specified and as directed by the Engineer-in-Charge.
Supply only Chain link fencing made out of plain mild steel galvinised wire , width of aperature 100 mm x 100 mm x 4mm dia to new steel posts by means of nuts and bolts, complete all as specified and directed by Engineer - in – Charge
M&L for PCC 1:3:6 type C-2 using 40mm graded stone agg as in foundation complete all as specified .
S&F for Mild steel angle iron fencing post and sturts in fencing incl necessary cutting drilling welding etc and bending to swan neck shape as required and drilling holes notching for wives etc conforming to Fe-290 Gde E-165 complete all as specified.
Fixing of chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed by Engr-in-charge
S&F MS Flat iron for securing bolts post and strut in fencing including cutting drilling holes notching for wire etc. flat iron filet and similar work conforming to FE 410-0 or Fe 310-0 complete all as specified
S&F mild steel screw bolts 12mm dia(machine made) with hexagonal or square heads at one end and screwed the other , or screwed both ends , each screwed end to be fitted with washers and one hexagonal or square nut, exc 10 cm but n. exc. 15 cm long and dia of shank 5 to 10 mm complete all as specified and directed.
M&L applying two coats of synthetic enamel paint over a coat of red oxide or zinc chromate primer including preparation of new steel or iron surfaces exc 10 cm width or girth, complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises
M & L 40 mm thick sand stone slabs, dressed close picked on exposed faces, set and jointed in cement and stone dust mortar 1:3 and pointed in cement mixed with approved pigment to match complete all as specified and as directed.
M&L for preparation of new steel surfaces n exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specifed and directed.
DUGGAL CONSTRUCTION CO
AAY KAY Constructions
Motorway Constructions
Barmotra Infrastructures
H K CONSTRUCTIONS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .