Improvement of distribution of LIS Batali in Tehsil Nadaun Distt. Hamirpur

Amount

Excavation in foundation and trenches etc. (in pipes and pits) in all kinds of soils such as pick work, jumper work, blasting in soft/hard rock, chiselling/wedging out of rock/where blasting prohibited)saturated soil stacking the excavated earth within all leads and lifts clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinth sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposting of all surplus excavated earth as directed within all leads and lifts including uprooting of trees dressing of beds, and sides and preparation of sub-grade, restoration of unmetalled/metalled/paved surfaces to its original condition including soring, strutting, timbering and dewatering where ever houses, fixing caution boards, crossing over trenches and to the entire satisfaction of the Engineer-in-charge.

Dismentalling of existing RCC pipe of various dia complete in all respect.

150mm dia

250mm dia

300mm dia

350mm dia

Laying and jointing of HDPE pipes of various dia meter in trenches confirming to IS: 4984-1972 complete with all type fittings and accessories i.e. coupling, Tees, Bends, reducers, Screwed adapters, flanged tail pieces etc (earth work to be measured and paid for separatey) within all leads and lifts. (Labour Rate)

90mm dia (PN 4.0 PE-80 grade)

110mm dia (PN 4.0 PE-80 grade)

125mm dia (PN 4.0 PE-80 grade)

140mm dia (PN 4.0 PE-80 grade)

160mm dia (PN 4.0 PE-80 grade)

180mm dia (PN 4.0 PE-80 grade)

250mm dia (PN 4.0 PE-80 grade)

90mm dia (PN 6.0 PE-80 grade)

90mm dia (PN 8.0 PE-80 grade)

Providing and fixing of Alfa valve of varioous dia Leader/Kirloskar make complete in all respect.

80mm dia

100mm dia

150mm dia

200mm dia

250mm dia

Providing and laying cement concrete 1:4:8(1cement:4sand:8 graded stone aggregate 40mm nominal size and curing complete excluding the cost of form work in foundation and plinth in all leads and lifts.

Providing and laying cement concrete 1:1.5:3(1cement:1.5 sand:3 graded stone aggregate 40mm nominal size)and curing complete excluding the cost of form work in:-

In foundation , footing basis of columns and the like and mass concete in all leads and lifts.

Walls (any thickness) but not less than 0.10cm thickness including attached pilasters, buttresses, plinth and string courses from top of foundation upto all floor level as per direction and to the entire satisfaction of the Engineer-in-charge.

Providing and fixing of 80mm dia G.I. inlet pipe as per direction and to the entire satisfaction of the Engineer-in-charge.

Providing,laying and jointing 350mm dia RCC pipe NP2 in all leads and lifts.

Providing,laying and jointing 900mm dia RCC pipe NP2 in all leads and lifts.

Providing and fixing controller/ Sluice valves Leader/Kirloskar make of following diameter with hand wheel as per IS:14846-2000 (Class PN-1.0) (including brass spindle as per 2906-1984 complete with bolts nuts, rubber insertion etc. and as per direction and to the entire satisfaction of the Engineer-in-charge

80mm dia

Providing and laying of Precast slab in designed cement concrete Mix of M-25 and curing complete excluding cost of form work as per direction and to the entire satisfaction of the Engineer-in-charge

Steel work welded in built up sections, trusses, and framed work including cutting ,hoisting, fixing in position and applying a priming coat of red lead paint in grating, framed guards bars, Ladders, railings, brackets and similar works as per direction and to the entire satisfaction of the Engineer-in-charge.

Miscellanous for locking arrangements and other accessories as per direction and to the entire satisfaction of the Engineer-in-charge.

Providing, Laying, mild or tor steel reinforcement for RCC. Work including bending binding and placing in position complete upto floor two level Tor steel in all leads and lifts.

Providing and laying cement concrete 1:3:6(1cement:3sand:6 graded stone aggregate 40mm nominal size and curing complete excluding the cost of form work in foundation and plinth in all leads and lifts.

Providing form work with steel plated 3.15mm thick welded with angle iron in frame 30x30x5mm, so as to give a fair finish including centring,shuttering,strutting and propping etc. with wooden battens and ballies height of propping and centering below supporting floor to ceiling not exceeding 4 meters and removal of the same for insitu-reinforced concrete and plain.

Vertical surfaces such as walls(any thickness) partitions and the like including attached pilasters, buttresses, plinth and string courses and the like complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge.

Providing in RCC. Work smooth finishing of the exposed surface with cement mortar 1:3(1cement:3sand) complete in all respect.

Laying and jointing of GMS pipes of various dia meter in trenches confirming to IS: 1239-2004 complete with all type fittings and accessories (earth work to be measured and paid for separatey) within all leads and lifts. (Labour Rate)

150mm dia

Providing and fixing C.I. Sluice valves Bir/Kartar make of following diameter with hand wheel as per IS:14846-2000 (Class PN-1.0) (including brass spindle as per 2906-1984 complete with bolts nuts, rubber insertion etc. and as per direction and to the entire satisfaction of the Engineer-in-charge

150mm dia

Providing under layers for plinth protection of 75mm thick (un consolidated) bad dry brick/stone agg. 40mm nominal size will rammed & consolidated & grouted with fine sand including preparation of ground.

Providing plinth protection 50mm thick in cement concrete 1:3:6(1cement:3sand:6graded stone aggregate 20mm nominal size) including finishing of the top surface of concrete smooth in all leads and lifts.

MS Kamal Dev Sharma

SURINDER KUMAR