8372 SPECIAL REPAIRS TO BUILDING NO P-117 TO P-122 AT KATTABOMMAN UNDER GE TIRUNELVELI

Amount

Demolition of brick tiles or terracing tiles, single layer on roofs including cement screed in roof complete all as specified and directed.

Removal of existing APP membrane and bitumen coats on roof surfaces and removing from the site complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for padding concrete upto existing RCC roof top complete all as specified and directed.

Material and labour for providing cement concrete of type B-1, 1:2:4 (20mm graded aggregate) with water proofing compound @2% by weight of cement even and fair surface complete all as specified and directed. Note:- water proofing compound shall be measured and paid separately.

Material and labour rendering 10mm thick on fair faces of concrete surface in CM 1 : 4 with water proofing compound @ 2% by weight of cement even and fair surface complete all as specified and directed. Note:- water proofing compound shall be measured and paid separately.

Material and labour APP based polymeric water proofing membrane minimum weighing 3Kg/ Sqm minimum 3 m thick reinforced with polyester non-woven fabric (weight not less than 150 gms/Sqm) laid over priming/tack coat of bituminous primer at the rate of 0.50 ltr / Sqm on roof surfaces by forced application and vertical surfaces up to grooves and width of overlap 75mm at the sides and 100mm in ends and applying coat of hot blown bitumen 85/25 at the rate of 1.20 Kg per Sqm over APP membrane complete all as specified and as directed.

Supply only integral Water Proofing compound.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Material and labour for 40mm thick plain cement concrete type B-1, 1:2:4 (using 20mm graded aggregate) as in floor complete all as specified and as directed.

Material and labour for joint free Non skid /Matt/Glazed ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc.,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including screed bed or bedding layer of mortar 15 mm thick in CM 1:6 complete all as specified and as directed.

Material and labour for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick in CM 1:6 complete all as specified and as directed.

Material and labour for joint free Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) a in Skirtings set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including over backing coat of mortar 10 mm thick in CM 1:6 complete all as specified and as directed.

Material and labour for glazed ceramic coloured tiles of size 300x450mmx7mm /350x250x7mm thick on vertical surfaces such as skirtings, dados and riser to steps ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including backing coat of 10mm thick in CM 1:4 complete all as specified and as directed.

Material and labour Machine cut prepolished mirror finished kota stone slab flooring 18-20 mm thick over cement screed base or bedding layer of mortar 20 mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing including bee wax polish over kota stone surfaces complete all as specified and as directed

All as per above item No.14 above but in riser of steps, skirting, dado and pillar over backing coat of 10mm thick in CM 1:4 complete all as specified and as directed.

Material and labour for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and as directed.

Material and labour for Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

Demolition of cement concrete in ground floor and pavings n.exc 15cm thickness (below or above ground level) including removal of debris/demolished materials to a distance exc 50m and n.exc 250 m complete all as specified and as directed.

Material and labour for 100mm thick plain cement concrete type D-2, 1:4:8 (using 40mm graded aggregate) as in floor complete all as specified and as directed.

Supply and fixing solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube and fixing in opening as per specification complete all as specified and directed.

Material and labour factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement as per specifications complete all as specified and directed.

Taking down Chowkhats or frames (without taking of shutter) not exc. 1.5 sq. m each all as specified and directed.

Taking down Chowkhats or frame exceeding 1.50 Sq.m but not exc 4 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

Material and labour Powder coated Aluminium anodised frame for doors, windows, ventilators and partitions with one or more rebates including joining cleat for fixing etc complete all as specified and directed

Material and labour Powder coated Anodised aluminium door shutters, aluminium section weighing not less than 1 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges anodised aluminum snap beading screws etc complete all as specified and directed

Material and labour Powder coated Anodised aluminium window and ventilator shutters, SLIDING type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed

Material and labour sheet glass ordinary quality and glazing 5.5mm thick in square exceeding 0.5 Sqm in each pane complete all as specified and directed.

Material and labour sheet glass ordinary quality and glazing 4mm thick in square not exceeding 0.5 Sqm in each pane complete all as specified and directed.

Material and labour for figured glass pin headed type 4.00mm thick complete all as specified and as directed

Material and labour for stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed

Material and labour Flush door shutters, 30mm thick, solid core construction, with both faces is covered with deco rative face veneer with lipping/frame to match complete all as specified and as directed.

Material and labour for Plain, solid, straight Chowkhats and frames in 2nd class hardwood , wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed with additional rebates for fixing second shutter complete all as specified and as directed

Supply and fixing Butt hinges, stainess steel ISI marked 125mm long complete all as specified and directed

Supply and fixing aluminium anodised barrel tower bolts of extruded section 200mm complete all as specified and directed

Supply and fixing Extruded aluminium handles fabricated type anodised 150mm long complete all as specified and directed

Material and labour for aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections (300 mm length) complete all as specified and directed

Supply and fixing 140mm/150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed

Taking down cement plaster on brick or stone wall and concrete surfaces etc including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed

Material and labour for rendering 15mm thick in two coats (10+5) in CM 1:4 on fair faces of brick work or concrete surfaces of wall finished even and smooth (without using extra cement) mixed with liquid water proofing compound 0.2% by weight of cement used upto 8 m height including necessary scaffolding complete all as specified and as directed. Note : Water proofing compound shall be measured and paid separately.

Supply only liquid water proofing compound

Material and labour for rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces on wall surfaces finished even and smooth (without using extra cement) complete all as specified and as directed.

Material and labour for new surfaces of wall surfaces and applying Two coat of oil bound distemper over a coat of primer complete all as specified and directed

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed

Material and labour for preparation of old surfaces of wall including complete removal of existing treatment and applying Two coat of oil bound distemper over a coat of primer complete all as specified and directed

Material and labour for complete removal and existing treatment on surfaces of ceiling etc by washing rubbing down and scraping down surfaces and applying three coat of white wash complete all as specified and directed

Material & Labour for preparation of old surfaces including complete removal of entire treatment on wall applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces complete all as specified and directed

Material and labour PCC 1:3:6 type C1 20 mm graded aggregate 75 mm thick in plinth protection finished even and fair without using extra cement complete all as specified and directed

Supply and fixing of Stainless steel letter made of 1mm thick and height of letter 300mm in ARIAL font mentioning "LOGISTICS BLOCK" complete all as specified and as directed.

Material and labour for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over a screed bed of 15mm thick in CM 1:4 complete all as specified and as directed Note: The quoted rate is deemed to be inclusive of necessary rounding/nosing of sharp edges and corners of granite.

Taking up or down 20 mm bore GI water tubing with fittings for taking into credit complete all as specified and as directed.

Taking up or down 25 mm bore GI water tubing with fittings for taking into credit complete all as specified and as directed.

Supplying and fixing or laying 20 mm dia CPVC pipe SDR 13.50 & Plain CPVC SDR 11 fittings on walls/ceiling or in floors complete all as specified and directed by Engineer in charge.

Supplying and fixing or laying 25 mm dia CPVC pipe SDR 13.50 & Plain CPVC SDR 11 fittings on walls/ceiling or in floors complete all as specified and directed by Engineer in charge.

Supply and fixing in repair vitreous china wash basin size 550 x 400 mm white flat back excluding taps waste chain and plug and porcelain stopper but including brackets complete all as specified and as directed. Make: Jaquar/Kohler/Hindware

Supply and fixing in repairs 32mm PVC waste pipe for wash hand basin., 900mm long complete all as specified and as directed.

Supply and fixing in repair 15mm bore fancy type Angular/stop cock flange chromium plated with long shank and cup (Concealed/open type) for 15mm iron pipe complete all as specified and as directed. Make: Jaquar/Kohler/Hindware

Supply and fixing, in repair 15mm bore fancy type chromium plated bib taps, with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. Make: Jaquar/Kohler/Hindware

Supply & Fixed in repairs pillar taps, fancy type, chromium plated, screwed down high pressure screwed for iron pipe, fancy type 15 mm dia complete all as specified and directed. Make: Jaquar/Kohler/Hindware

Supply and fix in repair 100mm dia Stainless steel anti cockroach trap including chrome finished jali with provision to receive the waste water pipe and fixed with white cement all around complete all as specified.

Supply and Fix SS Tubular towel rail of 600mm long complete all as specified and directed. Make: Jaquar/Kohler/Hindware

Supply and Fix in repairs shower rose of size 105mm continental series round shape Single Flow with Air Effect (ABS Body & Face Plate Chrome Plated) with Rubit Cleaning System along with shower arm Casted 190mm Long Light Body Round Shape for Wall Mounted Showers with Flange, joints fixing to steel pipe complete all as specified and directed. Make: Jaquar/Kohler/Hindware

Supply and Fix in repairs stainless steel soap dish with tumbler complete all as specified and directed. Make: Jaquar/Kohler/Hindware

Supply and fixing in repairs Vitreous china wash down water closet pan (EWC) including plastic water closet seat, closet pattern with flat bottom, and cover and aluminised hinge device complete all as specified and directed by EIC. Make: Jaquar/Kohler/Hindware

Supply and fixing in repair PVC valve less syphonic action type flushing cistern low level white with inlet ball valve, float and handle including brackets 10 Ltrs capacity including flush pipe and PVC connections etc., complete all as specified and directed. Make: Jaquar/Kohler/Hindware

Supply and fixing in repairs Hand Shower (Health Faucet) with 1 Meter Long Easy Flexible Tube in Chrome Finish and Wall Hook with NRV (Back flow preventer) complete all as specified and directed. Make: Jaquar/Kohler/Hindware

Supply and fixing in repairs Vitreous China urinals, Half stall type, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe complete all as specified and directed. Make: Jaquar/Kohler/Hindware

Supply and fixing PVC connections 15mm size with PTMT nuts of length 900mm complete all as specified and directed

Supply and fixing 75 mm PVC (SWR) floor trap plain with grating including jointing with solvent cement complete, all as specified and as directed.

Supply and fixing in repairs 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed

Supply and fixing 75 mm bore PVC (SWR) bends any radius complete all as specified and directed

Supply and fixing of 75mm cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete(1:2:4) type B1 all as specified and directed.

Supply and fixing in repair 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top),2 layered, ISI marked, complete all as specified and directed

Supply and fixing in repair of ball brass valve, high pressure with polythene float and fly nut, screwed for iron pipe or brass ferrule of size 25 mm complete all as specified and directed

Material and labour for 25mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends complete all as specified and directed

E/M WORKS

Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fittings such as switches, ceiling roses, pendants, regulators, sockets etc., removing materials out side MD land in case of Credit and making good disturbed surfaces of walls, floors, etc., complete all as specified and directed

Taking down the existing unserviceable main DBs of any type/ capacity/ description as existing at site including making good the disturbed surfaces to match with the existing finishes complete all as specified and directed

Taking down the existing unserviceable sub main wiring of any type / description as existing at site including making good the disturbed surfaces to match with the existing finishes complete all as specified and directed

Material and labour for Point wiring complete with FRLSH PVC insulated unsheathed cable 1100V grade conforming to IS-694, 1.5 Sqmm (nominal area) multistranded with copper conductor drawn through and including non metallic rigid PVC conduit of suitable size and accessories, concealed in wall / surface with factory made terminal boxes with base and front plate for mounting of switches, socket outlets, regulators etc as per required including provision of FRLSH PVC insulated unsheathed 1.5 Sqmm FRLSH multistranded with copper conductor as earth continuity conductor and connecting to common earth dolly complete all as specified and as directed for the following:

(a) One light/fan point controlled by one, one-way switch

(b) One 3/6 pin 5 Amps switch socket combination on independent board

All as per item No. 79 described here - in - before but for 3/6 pin 15 Amps switch socket combination on independent board with 2.5 Sqmm copper cable and provision of 2.5 Sqmm FRLSH PVC insulated stranded copper conductor cable for earth continuity conductor connected to common earth dolly connecting up to fittings complete all as specified and directed

Supply and Fixing modular switch 1 way 6 amps one module complete all as specified and as directed.

Supply and Fixing modular socket 6A 2/3 pin combined 2 module complete all as specified and as directed. complete all as specified and as directed.

Supply and Fixing modular socket 6A / 16A - 2/3 pin combined 2 module complete all as specified and as complete all as specified and as directed.

Supply and Fixing modular switch 1 way 16 amps one module complete all as specified and as directed.

Supply and Fixing modular fan step regulator 120W - 2 module complete all as specified and as directed.

Material and labour for Point wiring complete with FRLS PVC insulated unsheathed cable 1100V grade conforming to IS-694, 1.5 Sqmm (nominal area) multistranded with copper conductor drawn through and including non metallic rigid PVC conduit 20mm dia (ISI marked) and accessories, concealed in wall / surface on ceiling with sunken type pressed steel / welded terminal boxes made of mild steel sheet, 3.0 mm thick laminated sheet cover for mounting of switches, socket outlets, regulators etc., including provision of FRLS PVC insulated unsheathed 1.5 Sqmm FRLS multistranded with copper conductor as earth continuity conductor and connecting to common earth dolly complete all as specified and as directed for the following:

(a) One light/fan point controlled by one, one-way switch

All as per item No. 86 described here - in - before but for 3/6 pin 5 Amps switch socket combination on independent board

All as per item No. 86 described here - in - before but for 3/6 pin 15 Amps switch socket combination on independent board with 2.5 Sqmm copper cable and provision of 2.5 Sqmm FRLSH PVC insulated stranded copper conductor cable for earth continuity conductor connected to common earth dolly connecting up to fittings complete all as specified and directed

Supply and fix Switch Piano, flush type, single pole, one way, 6 Amps, 240 volts, ISI marked complete all as specified and as directed.

Supply and fix Switch socket combination, multipurpose, 2 Pin 6 Amps/3 Pin 6 Amps controlled by one switch 5 Amps, flush type, universal, ISI marked complete all as specified and as directed.

Supply and fix Switch socket combination, multipurpose 2 in 1, 3 Pin, 6/16Amps, flush type, universal, controlled by one switch 16Amps, ISI marked complete all as specified and as directed.

Supply and fix stepped type electronic fan regulator flush type on existing phenolic laminated sheet etc., complete all as specified and as directed.

Supply and fix Ceiling rose, surface type Bakelite, three terminal 65x32mm, ISI marked complete all as specified and as directed.

Supply and fix in repair Sheet metal enclosures with 2 pin earth plug and socket with one single pole 20 Amps MCB complete all as specified and as directed.

Supply and fix in repair Sheet metal enclosures for DBs single pole 8 way 240 V with neutral bus bar 200 Amps double door type with locking arrangement complete all as specified and as directed.

Supply and fix in repair Sheet metal enclosures, double door, MCB DB, 8 way, TPN, AC 415 Volts complete all as specified and as directed.

Supply and fix in repair MCB 63 Amps, 4 pole, 415 Volts, 50Hz 10 KA rupturing capacity 'C' curve complete all as specified and as directed.

Supply and fix in repair MCB SPN, AC 240 V, 6A to 32 Amps 10 KA rupturing capacity 'C' curve complete all as specified and as directed.

Supply and fix in repair MCB SP 240 V, 6A to 32 Amps 10 KA rupturing capacity 'C' curve complete all as specified and as directed.

Sub main wiring with two runs of single core 6.0 sqmm PVC insulated, unsheathed multistranded copper conductor 1100 volts FRLSH cable, with one run of 6.0 sqmm single core PVC insulated unsheathed multistranded copper conductor 1100 volts FRLSH cable as earth continuity conductor and one run of suitable size non metallic rigid PVC conduit and conduit accessories fixed on concealed on wall/roof including cutting chases etc complete all as specified and as directed. Note : (i) Two runs of main cable , one run of earth continuity conductor cable and one run of PVC conduit will be measured as one unit for payment purpose.

Sub main wiring with two runs of single core 4.0 sqmm PVC insulated, unsheathed multistranded copper conductor 1100 volts FRLSH cable, with one run of 4.0 sqmm single core PVC insulated unsheathed multistranded copper conductor 1100 volts FRLSH cable as earth continuity conductor and one run of suitable size non metallic rigid PVC conduit and conduit accessories fixed on concealed on wall/roof including cutting chases etc complete all as specified and as directed. Note : (i) Two runs of main cable , one run of earth continuity conductor cable and one run of PVC conduit will be measured as one unit for payment purpose.

Supply and fix in repairs LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver including Stellar bright 20 watt box type complete with all accessories internally pre wired and including connecting up with twin / three core flexible copper conductor cable with suitable size from ceiling rose to fitting with PVC round block 02 nos for mounting etc complete all as specified and as directed.

Supply and fix in repairs LED light fitting surface mounted type 2 feet x 10W LED complete with all accessories internally pre wired and including connecting up with twin / three core flexible copper conductor cable with suitable size from ceiling rose to fitting with PVC round block 02 nos for mounting etc, complete all as specified and as directed.

Supply and fix in repairs LED Security light fitting 25 W LED complete with all accessories internally pre wired and including connecting up with twin / three core flexible copper conductor cable with suitable size from ceiling rose to fitting etc, including necessary suitable clamps & bracket complete all as specified and as directed.

Supply and fix in repair RCCB 40 Amps, 4 pole, 415 Volts, 50Hz, 100 mA complete all as specified and as directed.

Supply and fix in repairs LED square light luminaries fitting surface mounted type 15 W LED (with a dimension of 312mm x 312mm) complete with all accessories internally pre wired and including connecting up with twin / three core flexible copper conductor cable with suitable size from ceiling rose to fitting etc, complete all as specified and as directed.

Material and labour for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below GL) with top edge of earth plate not less than 1.5 Mtr below normal ground level, earth plate surrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using galvanized earth wire 4mm dia connected by means of bolts, nuts, check nuts and washer of galvanized iron or steel, provision of 15 mm dia GI pipe medium grade for protection of GI earth wire and 20mm dia GI pipe medium grade for watering arrangement and PCC (1:3:6) , type C1 chamber, MS funnel, wire gauge, 50 mm thick RCC 1:2:4, type B1 earth pit cover with 6 Nos, 8 mm dia high strength deformed steel TMT bars on both ways including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to distance not exceeding 50 metre, provision of charcoal and salt complete all as shown in electrical plate No 3 of schedule Part-I

Supply and fix in repair Sheet metal enclosures for DBs single pole 4 way 240 V with neutral bus bar 200 Amps double door type with locking arrangement complete all as specified and as directed.

Supply and fix in repair Sheet metal enclosures, double door, MCB DB, 4 way, TPN, AC 415 Volts complete all as specified and as directed.

S.RAMACHANDRAN (BID ID -3068617)

J L CONSTRUCTIONS (BID ID -3068334)

SIVAN BUILDERS (BID ID -3068227)

M/S VIGNESH POWER SYSTEM (BID ID -3068012)