REPAIR TO BOUNDARY WALL FENCING AND GATE AND CONNECTED WORKS IN AOR OF AGE BR II UNDER GE I KANPUR

Amount

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground as in natural ground complete all as specified and directed.

All as per item No 1 above but embedded in concrete, brick work, masonary complete all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position as in unframed work complete all as specified and directed.

Excavating in post holes (or similar holes) in soft/lose soil each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed by Engineer -in- Charge

S&F Mild steel angle iron for posts and struts as in fencing post including cutting tops to shape as directed, drilling holes, notching for wire, etc ; flat iron fillets (for securing wire mesh etc.) including all necessary drillings, bolting or riveting, etc. and similar confirming to Fe 290 Gde E-165complete all as specified and directed.

M&L for mild steel plain bars 10 mm dia cut to length bent to shape required including making hooks at end woven in chain link (05 nos) and fixed with nut and bolts Fe 410 (W)Gde Fe 410-W(Gde E-250) quality -A or Fe-290 (Gde E-165) complete all as specified and directed.

S&F in repair Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 63mm to 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins etc complete all as specified and directed (Each line wire to be measured).

S&F in repair for mild steel bolt machine made with hexagonal or square heads at one end and screw the other to be fitted with washer etc and one hexagonal or square not exc 5cm long end dia neck 12mm including taking out old unserviceable bolts with nuts and washers complete all as specified and directed

Dismantling fencing wire mesh any type complete all as specified and directed.

S&F mild steel galvanised chain link fencing made of galvanised steel wire dia of wire not less than 2.50 mm of size/shape of mesh 50mmx50mm fixed to flat iron rails with RCC/angle iron post all as specified and directed. Note: Dia of wire of chain link fencing incorporated at site shall be measured and recorded in MB.

M&L two coats synthetic enamel paint on steel surface over a cotat of primer of red oxide of any description over 10 cm width or girth including preparation of new surfacescomplete all as specified and directed.

All as per item no 11 herein before but area n. exc. 10 cm in width or girth.

Demolition of plain cement concrete (unreinforced) in ground floors and pavings including tiles and paver blocks etc. not exceeding 15 cm thickness (above or below ground level) complete all as specified and directed.

M & L PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation or mass concrete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concretebut excluding ashlar facings, dressed stonework and precast concrete articles.

M&L for brick work with flyash bricks straight or curved on plan exc 6.0 m mean radius built in CM (1:4) complete all as specified and directed by Engineer-in-Charge..

All as per item No 16 above but except bricks and using bricks obtained from demolition of brick work against item no 15 above complete all as specified and directed by the Engineer-in-charge. Note: Serviceable bricks retrievd from serial item no 15 herein before shall be reused after proper cleaning.

M&L for brick work with sub class B bricks straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and directed by Engineer-in-Charge..

M & L for broken glass coping on top of wall set in cement mortar (1:3) complete all as specified and directed by Engineer -in- Charge/Garrison Engineer (I).

M & L for rendering 15mm thick cement plaster in 1:4 on fair faces of brick work or concrete surfaces and finishing the surface even and fair including mixing of WPC @3% by weight of cement as per manufacturer instruction complete all as specified and directed. Note: WPC shall be measured and paid separately under supply only item.

M & L for rendering 15mm thick cement plaster in 1:4 on other than fair faces of brick work or concrete surfaces and finishing the surface even and fair including mixing of WPC @3% by weight of cement as per manufacturer instruction complete all as specified and directed. Note: WPC shall be measured and paid separately under supply only item.

M & L for two coats of cement base paint over a coat of cement primer on newly plastered wall surface including preparation of new surfaces etc complete all as specified and directed .

Complete removal of existing treatment of wall complete and applying two coat of cement based paint complete all as specified and directed.all as specified and directed.

Providing precast cement concrete Type B0 (1:2:4) using 12.5mm graded stone aggregate in louvres and jallies , 35 mm thick (Measured solid) including all mouldings but excluding frame set in CM(1:4) complete all as specified and directed.

M & L for providing Plain cement concrete type B-1 1:2:4 (20mm graded stone aggregate) in copings/grouting or fixing of hold fast, post similar work including form work etc complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors omplete all as specified and directed.

Dismantling wrought iron or mild steel work/ structural steel work etc complete all as specified and directed.

S&F mild steel framed work as in doors or gates of angle or other section with gusset plates,rail,braces etc complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing including all necessary drillings, bolting or riveting, etc. and similar confirming to Fe 290 Gde E-165complete all as specified and directed.

M&L for plain cement concrete 1:2:4, type B-0 using 12.5 mm graded stone aggregate as in copings, including necessary formwork all as specified and directed.

Taking down cement plaster of any description on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc. and removing from site complete all as specified and directed .

Supply only integral water proofing compound complete all as specified and directed .

Allied Builders And Engineers

DEO Traders

M/s DKS Engineering Works

M/S MAA TARA TREATMENT PROJECT