E.I. work

Amount

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FRLS' PVC insulated & unsheathed copper wire (Make: Finolex / Havells / Mescab / Polycab / Gloster) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FRLS' PVC insulated & unsheathed copper wire (Make: Finolex / Havells / Mescab / Polycab / Gloster) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate and 2 no. suitable size “Ph & N” copper bar & earthing attachment fixed on wall incl. mending good damages to original finish.

Distribution wiring in 1.1 KV single core stranded 'FRLS' PVC insulated & unsheathed copper wire (Make: Finolex / Havells / Mescab / Polycab / Gloster) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required

2x(1.5 sqmm)+1x(1.5 sqmm)

2x(2.5 sqmm)+1x(1.5 sqmm)

2x (4 sqmm) + 1x (2.5 sqmm)

2x(6 sqmm)+1x(4 sqmm)

Distribution wiring in 1.1 KV single core stranded 'FRLS' PVC insulated & unsheathed copper wire (Make: Finolex / Havells / Mescab / Polycab / Gloster) in 25mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required

3x (4 sqmm) + 2x (2.5 sqmm)

4x (4 sqmm) + 2x (2.5 sqmm)

Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works

20mm size

25mm size

Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.

Supplying & Fixing CRC sheet metal (16 SWG) JB-cum- Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. bakelite/Perspex/coloured Perspex (wall matching colour) top cover 3 mm thick flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works

150 mm x 100 mm x 65 mm

200 mm x 150 mm x 65 mm

240 mm x 200 mm x 65 mm

Supply & Fixing 240 V 6 A Piano key type switch (Make: Anchor) on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

Supply & Fixing 240 V, 6A plug socket (Make: Anchor), without switch & plug top, on existing sheet metal switch board with bakelite/perspex top cover by screws after making housing for plug by cutting bakelite/perspex top cover and making necy. connections with PVC wire and earth continuity wire etc.

Supply & Fixing 240 V 16/20 A Piano key type switch (Make: Anchor) on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supply & Fixing 240 V, 20 A plug socket (Make: Anchor), without plug top and switch, on existing sheet metal switch board with bakelite/perspex top cover by screws after making housing for combined plug switch by cutting bakelite/perspex top cover and making necy. connections with PVC wire and earth continuity wire etc.

Supply & Fixing Socket type fan regulator (Step type) (Make: Anchor) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc.

Supplying & Fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works (Make : Legrand Myrius/ Schneider Livia/ L&T Englaze)

4 Module

6 Module

2 Row 12 Module

Supply & Fixing 240 V 6 A Modular type switch (Make : Legrand Myrius/ Schneider Livia/ L&T Englaze) on existing GI Modular type switch board having top cover plate and making necessary connections as required

Supply & Fixing 240 V 16 A Modular type switch (Make : Legrand Myrius/ Schneider Livia/ L&T Englaze) on GI Modular type switch board having top cover plate and making necessary connections as required

Supply & Fixing 240 V, 6A, 5 pin Modular type plug socket (Make : Legrand Myrius/ Schneider Livia/ L&T Englaze), without switch & plug top, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Make : Legrand Myrius/ Schneider Livia/ L&T Englaze), without plug top and switch, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Make : Legrand Myrius/ Schneider Livia/ L&T Englaze) on existing Modular GI switch board as per GS

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall as per GS.

2+8Way [ Legrand ]

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection as perGS [Make-Legrand ]

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connectionas per GS [ Make -Legrand ]

Fixing only cabin fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length

S/D of 240 V 450 mm dia full metal body A.C Wall bracket Fan incl. blades & other accessories (Make: EPC Electrical Pvt. Ltd)

Fixing only exhaust fan after making holes in wall as per GS

Supply & Fixing GI sheet (20SWG) metal Cowl with MS flat iron frame & GI wire mesh on wall with necy. bolts & nuts (6 mm dia x62 mm long)

Supplying and fixing compression type gland and finishing those for following XLPE / PVC armoured cable (2 / 4 / 3.5) Core as per GS.

4 Core 25 Sq. mm

4 Core 95 Sq. mm

Straigh through Jointing of cable of different size by compound jointing kit including S&F ferrul, tapes and jointing materials (Brand approved by EIC)

3½ / 4 core 25-35 sqmm cable

3½ / 4 core 70 sqmm cable

3½ / 4 core 120-150 sqmm cable

Laying of cable from 3/3½ core 35 sqmm to 50 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting (existing cable)

Supply of 14 SWG MS downrod having drilled holes for housing nuts, bolts, washers & safety nuts as per direction of EIC for fixing ceiling fan at suitable position as mentioned below -

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

Fixing only fan clamp for RC ceiling as per specification after cutting the ceiling & binding with reinforcement and mending good the damages. (Ceiling fan are depatmentally supplied)

Supplying and fixing 415V, 100A TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. (Make: L&T / Siemens / ABB)

Supply of Single Insdustrial box (thickness of box should not be less than 22 SWG) type luminaire with CRCA body (Make: Philips TMC 502 1xT-LED 22W P3241 / Osram / Wipro having similar specifications) incl. S&D of 1 x 18/20 watt 4 ft LED tube lamp (Make: Philips Cat: MAS LED tube 1200 mm 18 W 865 T/I / Osram / Wipro having similar specifications)

Supply of Twin Insdustrial box (thickness of box should not be less than 22 SWG) type luminaire with CRCA body (Make: Philips TMC 502 2xT-LED 22W P3241 / Osram / Wipro having similar specifications) incl. S&D of 2 x 18/20 watt 4 ft LED tube lamp (Make: Philips Cat: MAS LED tube 1200 mm 18 W 865 T/I / Osram / Wipro having similar specifications)

Supply & Fixing 240 V, 25A Modular type socket, 25 A, Modular type starter (Make : Legrand Myrius/ Schneider Livia/ L&T Englaze) with 25A Modular switch type DP MCB (C-Curve) and 6 Module GI Modular type switch board with 6 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

S & F Of 240 Volt, 90W LED street light (Make : Philips Model No: BRP033 LED 90 CW SLR CR PSU SPD/Osram / Wipro equivalent) in place of damaged one as per direction of EIC.

S & Delivery of 1.1 KV grade PVC Al/Armoured Cable (Make- Finolex/Havells/Gloster)

4 core 35 sqmm

4 core 10 sqmm

3 core 6 sqmm

Laying of cable upto 3/4 core 35 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :

4 core 35 sqmm

4 core 10 sqmm

3 core 6 sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :

4 core 35 sqmm

4 core 10 sqmm

3 core 6 sqmm

Supplying and Fixing GI water proof looping cable box having hinged GI Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. of the following sizes as indicated below, Comprising of one 250 V, 15 A Kit-Kat fuse unit, one NL on porcelain insulator etc. and housing the same in pole muffing incl. addition and alteration to the existing CC muffing (6:3:1) after dismantling the damaged looping cable box etc. where necy. incl. painting.

(a) 200 x 150 x 100mm

Repairing of the existing street / Flood light fittings with replacing of Driver & Spike protector as per original sample & make (Philips / Crompton / approved by EIC)

Scaffolding arrangement for working at different level height of the road-side gate by making suitable heavy type scaffolding (size 65' wide x 25' height) by bamboo, ropes and wooden planks etc. to be provided for as per direction of the EIC.

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By ISI-Medium GI pipe

Connecting the equipments body to earth busbar including S&F 20 mm x 3 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc.

Defect Liabibility Period 1 (One) year

Make & model of each and every material to be approved by EIC

Netaji Engineers CO-Operative Society Ltd. (BID ID -5870787)

S. A. ENTERPRISE (BID ID -5858686)