GE/PNH-32/2024-25

Amount

Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings,removing material from site for taking credit etc and making good disturbed surfaces of wall, floors, complete all as specifiecd and directed.

S&F in repair LED batten 20W PVC body and diffuser with tricolour LED complete all as specifiecd and directed.

Dsmantling and taking down unserviceable main switches, DB etc of any type/size and making good disturbed surfaces to match with the existing finishes, complete all as specifiecd and directed.

Taking down existing wooden casing/capping from site carefully and refixing the same at existing place incl all accessories and making good disturbed surfaces to match with the existing finishes, complete all as specifiecd and directed.

M&L for point wiring with two single core 1.5 Sqmm (nominal cross section area) FRLS PVC insulated unsheathed multistranded copper conductor cable and one single core 1.5 Sqmm (nominal cross section area) FRLS PVC insulated unsheathed multistranded copper conductor cable as earth continuity to common earth and connecting to earth dolly running in and including PVC casing & caping (ISI marked) of suitable size in existing wooden, casing capping including all required accessories complete all as specified and as directed for the following :-

One light/fan point/bell point controlled by one way switch 6 Amp complete all as specified and directed.

One 3/5 pin socket outlet 6 amp on same board complete all as specified and directed.

One 3/5 pin socket outlet 6 amp independent board complete all as specified and directed.

All as per srl item No 5.00 here in before but for one 3 pin socket outlet 16/20 Amp independent with two single core 4.0 Sqmm size cable as phase & neutral and on single core 4.0 Sqmm as in continuous earth wire complete all as specified and directed.

S&F in repair ceiling rose, 3 terminal, surface bakelite 65 mm x 50mm, PVC poly carbonate, insulated body, complete all as specified and directed.

S&F in switch, one way, 6 Amps of colour brushed brass or 24 Kt Gold plated of the heritage series of SSK or equivaleat in Havells/Legrand/Anchor and as approved by GE and complete all as specified and directed by Engr-in-charge. Note: Rate is inclusive of suitable cover plate and accessories of SSK heritage series (model No 701 & 702) or equivalent in Havells/Legrand/Anchor

S&F in repair switch, one way, 16 Amps of colour brushed brass or 24 Kt Gold plated of the heritage series of SSK or equivalent in Havells/Legrand/Anchor and as approved by GE and complete all as specified and directed by Engr-in-charge. Note: Rate is inclusive of suitable cover plate and accessories of SSK heritage series (model No 703) or equivalent in Havells/Legrand/Anchor

S&F in repair bell push, one way, 6 Amps of colour brushed brass or 24 Kt Gold plated of the heritage series of SSK or equivalent in Havells/Legrand/Anchor and as approved by GE and complete all as specified and directed by Engr-in-charge. Note: Rate is inclusive of suitable cover plate and accessories of SSK heritage series (model No 703) or equivalent in Havells/Legrand/Anchor

S&F in repair switch piano flush type 6 Amp single pole one way, (ISI marked), complete all as specified and directed.

S&F in repair switch socket combination, 6 Amps of colour brushed brass or 24 Kt Gold plated of the heritage series of SSK or equivalent in Havells/Legrand/Anchor and as approved by GE and complete all as specified and directed. Note: Rate is inclusive of SSK heritage series switch, socket and suitable cover plate and accessories of SSK Heritage series (model No 701, 702, 707 & 752) or equivalent in Havells/Legrand/Anchor

S&F in repair switch socket combination, 3 pin, 6 & 16 Amp of colour brushed brass or 24 Kt Gold plated of the heritage series of SSK or equivalent in Havells/Legrand/Anchor and as approved by GE and complete all as specified and directed. Note: Rate is inclusive of SSK heritage series switch, socket and suitable cover plate and accessories of SSK Heritage series (model No 725 & 756) or equivalent in Havells/Legrand/Anchor

S&F in repair socket outlet 2 in 1, 3 pin, 6 Amp of colour brushed brass or 24 Kt Gold plated of the heritage series of or equivalent in Havells/Legrand/Anchor SSK and as approved by GE and complete all as specified and directed. Note: Rate is inclusive of SSK heritage series socket and suitable cover plate and accessories of SSK Heritage series (model No 707) or equivalent in Havells/Legrand/Anchor

S&F in repair bell push, flush type, 6 Amps, (ISI marked), complete all as specified and directed by Engr-in-Charge.

S&F in repair door bell, ding dong type (ISI marked) AC 230V complete all as specified and directed by Engr-in-Charge.

S&F in repair fan regulator flush type for 1200/1400 mm sweep ceiling fan of colour brushed brass or 24 Kt Gold plated of the heritage series of SSK or equivalent in Havells/Legrand/Anchor and as approved by GE and complete all as specified and directed. Note: Rate is inclusive of SSK heritage series fan regulator and suitable cover plate and accessories of SSK Heritage series (model No 710) or equivalent in Havells/Legrand/Anchor

Supply and fixing in repair Inverter LED batten 20W with square profile and polycarbonate channel, lithium Ion battery with charging time 8 Hours-10 Hours and backup time upto 4 Hours with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. Make- Havells Cat part No-LHEXACP7FN1W020 or equivalent Make as specified in PS

Supply and fixing in repair LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. all as specified and directed.

Supply and fixing repair LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type in existing wooden ceiling with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

Supply and fixing in replacement LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing in replacement round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing in replacement square slim panel, LED light fitting recessed type with high efficiency PMMA diiffuser of 3 watt capacity, soft glare free light complete with driver, holder and LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing in replacement pearl cob swivel downlight, LED light fitting recessed type with high efficiency PMMA diiffuser of 3 watt capacity, colour warm white or as directed, suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make : Polycab cat part No. LDO0105010 or equivalent make as specified in PS.

Supply and fixing in replacement spot (focus) track LED light fitting wall mounted surface or as suitable, with high efficiency PMMA diiffuser of 15 watt capacity, colour warm white or as directed, suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make : Polycab cat part No. PLMD0701001 or equivalent make as specified in PS.

Supply and fixing in replacement elegant suspended round moon light with spun aluminium body with high transmittance, PMMA diiffuser of 40 watt capacity, colour warm white or as directed, suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make : Polycab cat part No. PLT0101423 or equivalent make as specified in PS.

S&F in repair sheet metal enclosure for DBs, VTPN, 8 way vertical suitable for TP/FP G frame MCCB of capacity 100 amps, double door (IP43) built in bus bar suitable for 415 volts, AC, 50 Hz, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning complete all as specified and directed. complete all as specified and directed. “Note:- Rate is inclusive of MCCB 200A, 4 pole with all accessories.”

S&F in repair sheet metal enclosure for DBs, TPN, 6 way, double door (IP43) built in bus bar suitable for 415 volts, AC, 50 Hz, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning complete all as specified and directed. complete all as specified and directed. “Make: Havells, DCORA DB box, Model- Klass leather, Cat Part No DSSDBX0205” or equivalent Make as specified in PS.

S&F in repair sheet metal enclosure for DBs, SPN double door (IP43), 8 ways with 200 amps rated bus bar suitable for 240 volts, AC, 50 Hz, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning complete all as specified and directed. complete all as specified and directed. “Make: Havells, DCORA DB box, Model- Klass leather, Cat Part No DSSDBX0161” or equivalent Make as specified in PS.

S&F in repair sheet metal enclosure for DBs, SPN double door (IP43), 12 ways with 200 amps rated bus bar suitable for 240 volts, AC, 50 Hz, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning complete all as specified and directed. complete all as specified and directed.“Make: Havells, DCORA DB box, Model- Klass leather, Cat Part No DSSDBX0162” or equivalent Make as specified in PS.

S&F in repair MCB isolator SPN 40 to 63 amps, capacity 10 KA, 'C' series complete all as specified and directed.

S&F in repair MCB isolator, single pole 40 amps, capacity 10 KA, 'C' series complete all as specified and directed.

S&F in repair MCB isolator, four pole, 80 amps, capacity 10 KA, 'C' series complete all as specified and directed.

Supply, laying & testing of cable in trenches/pole XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 50 sq. mm, 3.5 core including taking down old cable, complete all as specified and directed.

Supply, laying & testing of cable in trenches/pole XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sq. mm, 2 core including taking down old cable, complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation of pole, stays, laying of cables etc and getting out in hard/dense soil complete all as specified and directed by Engineer-in-charge.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm, in any type of soil, complete all as specified and as directed.

Removal of excavated material to a distance not exc.50 m and depositing where directed at a level not exceeding 1.5 mtr above starting point, complete all as specified.

M&L for dry sand cushioning to UG cable 8 cm thick before laying and 15cm thick after laying complete all as specified and directed. Note:- 1.Dry fine sand of best available quality shall be used. 2.Punned thickness shall be made and paid.

M&L for sub class ‘B’ bricks old size, laid flat transversely along the length of cable with width equal to the length of bricks over sand cushioning as cable protection, laid in trenches, complete all as specified and directed.

S&F GI pipe light grade 40 mm bore for cable protection fixed on poles or laid in trenches, under floor, ducts etc with fixing clamps, nuts bolts etc incl taking out existing pipe complete all as specified and directed.

Earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron wire 4.0mm dia by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 3 of 2009 SSR Pt-I and testing complete including earth work in any type of soil, PCC 1:2:4 type B-1 as in earthing pit and cover 50mm thick reinforced with 6mm dia MS round bar @ 10cm C/C both way and MS frame, common salt, charcoal and testing on completion including dismantling unsv earthing, complete all as specified and directed.

M&L for wiring for circuit/submain wiring alongwith earth wire with 2 x 2.5 Sqmm +1x2.5Sqmm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed as required including taking down old sub main wiring, complete all as specified and directed.

M&L for wiring for circuit/submain wiring alongwith earth wire with 2 x 4.0 Sqmm +1x4.0 Sqmm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed as required including taking down old sub main wiring, complete all as specified and directed.

S&F in repair LED 9W inverter lamp (B22 CDL), suitable for angle holder, complete all as specified and directed.

S&F in repair Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 amps, 240 volts complete all as specified and directed.

M&L for wiring for circuit/submain wiring alongwith earth wire with 2 x 6 Sqmm +1x6 Sqmm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed as required including taking down old sub main wiring, complete all as specified and directed.

M&L for wiring for circuit/submain wiring alongwith earth wire with 2 x 10 Sqmm +1x10 Sqmm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed as required including taking down old sub main wiring, complete all as specified and directed.

S & F in repair LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. complete all as specified and directed.

M/S BHATT TRADERS (BID ID -3127115)

JAMWAL CONSTRUCTION CO (BID ID -3126362)