Restrenghening and preventive maintenance of the street lighting line and its control equipment in the 220 V OH Electric Line including erection of OH line, Insulated overhead cable, isolator and LT and HT control panel at Kargali Railway Siding PF 2

Providing and fixing following capacity TP&N disconnector fuseswitch unit inside the existing panel boardwith ISI marked HRCfusesincluding drilling holes in cubicle panel, making connections, etc. as required. (400 A, TP&N)

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders inexisting cubicle panel board including drillingholes in cubicle panel, making connections, etc.as required. (400 A, 35 kA, TPMCCB)

Earth work in surface excavation not exceeding 30 cm in depth but exceeding1.5 min width as well as10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto1.5 m,as directed by Engineer-in-Charge:

Supplying and making straight through cable jointing with heat shrinkable jointing kit complete with all accessories including ferrules suitable for size 70 sq. mm., 3 core, XLPE aluminium conductor cable of 11 KV grade as required.

Supply and making outdoor cable end termination with heat shrinkable jointing kit compplete with all accessories including lugs suitable for 70 sq. mm. size of 3 core XLPE aluminium conductor cable of 11 kV grade as required.

Supply and making outdoor end termination with cast resin compound including aluminium lugs and other jointing materials for following size of PVC insulated and PVC sheathed/ XLPE Aluminium conductor cable of 1.1 kV grade as reqd. (3 x 95 sq. mm.)

Supplying and drawing 2 x 2.5 sq. mm. size of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. (for Service Wire)

Supply and fixing of 32 mm dia 2 metre long G.I. pipe, (medium class) bracket for mounting of fluoroscent H.P.M.V./ H.P.S.V. L.E.D. Light fittings on pole including binding the pipe to the required shape, 2 nos. 40 mm x 3 mm flat iron clamps with nuts and bolts and washers painting the flat iron with primer and finish paint etc. as reqd (for hanging departmental L.E.D. lights)

Surface dressing of the ground including removing vegetation and in equalities not exceeding15 cm deep and disposal of rubbish, lead upto 50 m and lift up to 1.5 m.

Supplying and erection of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for two 11 KV over head line conductors complete with 50 mm X 50 mm X 6 mm (angle iron bracket welded to the channel iron and complete with 50 mm X 6mm M.S. flat iron clamps, bolts and nuts including drilling holes for insulator pins, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required