WBPWD/AE-NESD/NIQ-01/2024-25

Amount

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment [D-10/14]

4 Way Enclosure [Make: Legrand Enclosure (607715) or equivalent model of L&T/Siemens/Crabtree as approved by E.I.C]

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.

2+10 way Enclosure [Make: Crabtree Enclosure (DCDKSHODCW12) or equivalent model of Legrand/Siemens/L&T as approved by E.I.C] [D-9, D-10/13]

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection. (Make: Legrand/Siemens/ Crabtree/L&T as approved by E.I.C) [D-5/6]

(a) 63Amp FP Isolator

(b) 40 Amp DP Isolator

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection (Make: Legrand/Siemens/ Crabtree/L&T as approved by E.I.C) [D-6/7]

(a) 6-32 Amps SP MCB

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate and 2 no. suitable size “Ph & N” copper bar & earthing attachment fixed on wall incl. mending good. [E-24/1]

a) Avg. Run-9mtr [E-24/1(d)]

b) Avg. Run-12mtr [E-24/(g)]

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 6A 3 pin Modular type plug socket & switch (Brand approved by EIC) on 4 Module GI switch board with 3/4 Module top cover plate on wall incl. necy. connection making earthing attachment, painting and mending good damages to building works. [E-24/3]

a) On board [E-24/3/(a)]

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required. [E-14/1(a)]

a) 2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC [E-14/1a(i)]

b) 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC [E-14/1a(ii)]

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. [F-9]

i) 2.5sqmm [F-5/9(i)]

Supplying & Fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works. [E-17/1]

(a) 4 Module [E-17/1(a)]

(b)6 Module [E-17/1(b)]

Supply & Fixing 240 V 6 A Modular type switch (Legrand: Myrius/Arterior or equivalent model of Crabtree/ROMA with choice of colour as approved by E.I.C) on existing GI Modular type switch board having top cover plate and making necessaryconnections as required. [E-17/3(a)]

Supply & Fixing 240 V 16 A Modular type switch (Legrand: Myrius/Arterior or equivalent model of Crabtree/ROMA with choice of colour approved by EIC) on GI Modular type switch board having top cover plate and making necessary connections as required [E-17/3(b)]

Supply & Fixing 240 V, 6A, 3 pin Modular type plug socket (Legrand: Myrius/Arterior or equivalent model of Crabtree/ROMA with choice of colour approved by EIC), without switch & plug top, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [E-17/4(a)]

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Legrand: Myrius/Arterior or equivalent model of Crabtree/ROMA with choice of colour approved by EIC), without plug top and switch, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [E-17/4(b)]

Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting

Supplying and fixing compression type gland and finishing the ends of following XLPE / PVC armoured AL. cable (2/4 / 3.5)Core as per GS. [F-4 & F-5]

ii) 4 Core 25 Sq.mm [[7(c)/F4 & 8(b-xiii) /F5]]

Fixing only single/twin florescent light fitting complete with all accessories Directly on wall/ceiling with HW block and suitable size MS fastener, Ceiling plate, nipples etc. as required [C-2/14](d)]

Fixing only outdoor / street light type fluorescent light fitting or MV light fitting complete with all accessories to be fixed /projected from the wall of the building incl. making holes/providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc. [C-3/18]

Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint [H-5/H(5)]

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: [C-4/28]

i) 30 cm (12") [C-4/28(a)]

Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long)

30 cm Exhaust fan (12") [D-14/32(a)]

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire. [C-3/21(a)]

Supply & fixing of 230V 18"(450 mm) best quality full meta body wall bracket fan, complete with all accessories, down-rod etc [Make: Orient/Crompton/EPC as per approval of EIC/Authority]

Supply of 240V 12''(30 cm) 1400 RPM Sweep heavy duty best quality Full metal body Industrial Exahust Fan (Make : EPC/Crompton/Usha as approved by E.I.C)

Supply of 45 W Street Light, Lumen output: Min. 120 lm/W, die cast aluminium housing, Driver rating should be higher than the bfittings rating.[Make :-Philips/Crompton/ Wipro or manufacturer with own NABL accredited Lab with valid Test certificate as approved by E.I.C]

Supply of 1200 mm High speed 35 W , 370 RPM, 220 Cmm ceiling fan.[Make: Orient/ Crompton/Polar BEE star rated as per choice of EIC]

Supply of 4'ft LED single batten/Metal frame fittings incl. 1no 20W Polycarbonate/Aluminium LED tube having luminoius efficacy of 100lm/W [Make :-Philips/Crompton/ Wipro or manufacturer with own NABL accredited Lab with valid Test certificate as approved by E.I.C]

Supply and Fixing of Recess Mounted 2’ X 2' square LED luminaire Wattage: Max. 36W Lumen output: Min. 100 lm/W, luminous flux: Min. 3600 lm,[Make :-Philips/Crompton/ Wipro or manufacturer with own NABL accredited Lab with valid Test certificate as approved by E.I.C]

Supply of 4/3.5/2 Core XLPE Insulated & Sheathed Armoured Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes [ Make Havells/ Gloster /KEI /Polycab/RR cable as approved by E.I.C] [Rate as approved by SE-PEC vide memo no.-276 dt 07/06/23]

(ii) 4 Core 25 Sqmm

Add. G.S.T.@ 18% on total value.

Add. LWC.@ 1% on total value

R.N.ROY ELECTRICAL CONTRACTOR

D. PAUL ENTERPRISE

THE POWER OF INSULATION