Construction of office of the incharge fruit plant Nursery Training centre at sumoor

Amount

Earth work in excavation by mechanical means in trenches for foundation drains pipes cables etc. (Not exceeding 1.5mtrs in width) and for shafts walls cess pits and the like not exceeding 10sqm on plan depth up to 1.5mtrs including disposal of excavated earth upto 1mtr from cutting edge disposed earth to be leveled and neatly dressed.

Ordinary Rock

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)including carriage complete job.including cost of carriage compltete job.

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts andstruts upto floor five level including curing but excluding cost of centering shuttering,finishing and reinforcemenent.1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including cost of carriage compltete job.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more.including cost of carriage compltete job.

Dry stone pitching(any thickness)excluding cost of stone on horizontal. 4 inch thick

Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level andcuring complete with:1 Cement mortar 1:6 (1 Cement : 6 coarse sand)including cost of carriage compltete job.

Centering and shuttering including strutting, propping etc. and removal of form for: A, Foundations, footings, bases of columns etc. for mass concrete.

B, Lintel, beams, plinth beams, girders, bressumers and cantilevers.

C,Columns, pillars, piers, abutments, posts and struts.

D, Stairs (excluding landings) except spiral staircases.

E, Suspended floors, roofs, landings, balconies and access platforms.

F, Edges of slabs and breaks in floors and walls Under 20 cm wide

Providing and laying DPC 40mm thick with cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 12.5mm nominal size)Nallah Wall:

Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position in cement mortar 1:3 (1cement:3 coarse sand), cost ofrequired centring, shuttering and curing complete 1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20 mm nominal including cost of carriage compltete job.

Providing wood work in frames of doors, windows clearstory windows and other frames, wrought framed and fixed in position. ( 1st class Kail wood) Frame of doors and window.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clearstory window including ISI marked pressed butt hinges bright finished of required rings with necessary screws (2ndKail wood )

Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately)

Providing and fixing glazed shutter for doors, windows and clearstory windows using 10kg/sqm (4mm thick) float gass panes including ISI marked M.S pressed butt hinges bright finished of required rings with screws (1st classkail wood)

15mmthick cement plaster in cement mortar 1:6 mix 1 cement: 6 fine sands.

6mm thick cement plaster 1:3 (1 cement: 3 Fine sand) to ceiling of mix.

Cement concrete flooring 1:2:4 stone aggregate 20mm nominal size finishing with a floating coat of neat cement including cement slurry but excluding the cost of nosing of steps etc. 50mm thick 20mm nominal size stone aggregate crushed.

Providing and applying white cement-based putty of avg. thickness 2mm of approved brand and manufacture over the plastered wall surface to parapet surface.

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture of wood work(Hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work

Rough cast plaster up to 10m height above ground level with a mixture of sand and gravel or crushed stone from the fresh plaster in two layers ,under layer 12mm cement plaster 1:4 (1 cement : 4 coarse sand) and top layer cement plaster 1:3 (1 cement : 3 fine sand) mix with 10% finely grounded hydrated lime by volume of cement.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (one or more coats)

Providing and fixing lSI marked oxidised M.S. sliding door bolts

Providing and fixing lSI marked oxidised M.S. tower bolts.

Providing and fixing lSI marked oxidised M.S. Handle.

Filling available excavated earth (excluding rock) in trenches plinth, sides of foundation etc. Layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead up to 50m and lift upto 1.5m.

Finishing walls with water proofing cement paint ofrequired shade 13.55.1 New work (two or more coats) applied @3.84 kg/1.0sqm

Providing, laying and fixing Ladakhi Ornamental Shingtsak 2ft height.

Providing and fixing pre-laminated flooring of approved brand like action Tesa, green ply or equivalent. Complete job.

Providing and fixing wall panelling tongued and grooved in Wall Including fixing with iron screws with 12mm ply complete job.

French spirit polishing with Two or more coats on new works including a coat of wood filler

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colors such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete.

Providing and fixing white vitreous china pedestal type water closet ( indian type) with seat and lid , 10 litre low level white vitreous china flushing cistern and CP flush with fittings, C. I./M.S. brackets 40mm bend diameter flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors , wherever required: W.C. pan with lSI marked white solid plastic seat and lid. with white vitreous china flushing cistern & C. P. flush bend.

Providing and fixing G.I inlet connection for flush pipe connecting with W.C pan.

Extra for providing coloured other than black solid PVC plastic seat and cover in European type WC pan instead of white plastic seat and cover.

Providing and fixingjet for western type water closet

Providing and fixing wash basin with C. I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: White Vitreous ChinaWash basin size 550x400 mm with a pair of 15 mm C. P. brass pillar taps

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes U V stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply including all PP -R plain & brass threaded polypropylene random fittings including trenching, refilling & testing of joints complete as per direction of Engineer in Charge. PN-16 pipe, 32mm OD(SDR-7.4)

Providing and fixing 3-layer PP-R (Poly propylene Random copolymer) pipes U V stabilized & anti - microbial fusion welded, having thermal stability for hot & cold-water supply including all PP -R plain & brass threaded polypropylene random fittings including trenching, refilling & testing of joints complete as per direction of Engineer in Charge. PN-16 pipe, 32mm OD(SDR-7.4)

Providing and fixing PVC soil waste and vent pipe of required dia including bends, Tee door bend, L bend trap jointed with addisive material ISI marked like Prince vector or equvilent brand all complete a) 100mm

Providing and fixing PVC soil waste and vent pipe of required dia including bends, Tee door bend, L bend trap jointed with addisive material ISI marked like Prince vector or equvilent brand all complete

Providing and fixing toilet paper holder c.p brass

Providing and fixing soap dish

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) completes with 6mm thick hard board ground fixed to wooden cleats with C.P brass screw and washers complete.

Providing and fixing CP brass basin mixer pillar tap of approved quality and make

Providing and fixing CP brass bib cock of approved quality and make

Providing and fixing CP brass stop cock of approved quality and make

Providing and fixing floor jail

Stainless steel kitchen sink - with drain board 460X915 MM bowl. depth 178 mm

Supply and fixing of 4-way PVC junction box/conceal box with accessories and making good as required. Complete

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing 0.5 Hp water motor pump

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

M/S WANGCHUK SINGAY

M/S THUKJAY TONDAN GOVT CONTRACTOR