CERTAIN REPAIRS TO JOINERY, IN BLDGS OF MD AND OTM ACCN AT HAPPY VALLEY AND CERTAIN REPAIRS TO JOINERY, FLOORING, PLASTERING, SANITARY FITTINGS IN BLDGS OF ARC, MES, MDC AND 11 WEU AT HAPPY VALLEY UNDER GE SHILLONG.

Amount

Taking down of cement plaster on brick or concrete surfaces including racking out joints, hacking for keys, scrubbing down with water etc complete including removal rubbish off premises all as specified and directed.

M&L for Rendering, 15 mm thick plaster in cement sand mortar (1:4), in two layers, top 5 mm thick with approved Water proofing compound @ 3% by the weight of cement or as per manufacturers instructions over a layer of 10 mm thick base layer etc complete all as specified and as directed by Engineer-in-Charge. Note WPC shall be measured and paid separately.

M&L for Rendering 10mm thick plaster on fair faces of brick work or concrete surfaces in cement sand mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed.

M&L for Rendering 5mm thick plaster on ceilling in cement sand mortar (1:3) finished even and smooth without using extra cement complete all as specified and directed.

Supply only integral water proofing compound, ISI marked.

Taking down Chowkhats or frames exc 1.5 Sqm but n.exc 4 Sqm each but with shutters (without taking off shutters from the frame) including builders hardware each complete all as directed by Engr-in-Charge.

Taking down Chowkhats or frames n.exc 1.5 Sqm each but with shutters (without taking off shutters from the frame) including builders hardware each complete all as directed by Engr-in-Charge.

Taking down shutter of any description including all builders hardware of size exc 1 Sqm but n.exc 2 Sqm each etc complete all as specified and as directed.

Taking down shutter of any description including all builders hardware of size n.exc 1 Sqm each etc complete all as specified and as directed.

Labour only for Resecuring or easing & adjusting shutter without taking down, of any description including all builders hardware of size exc 1 Sqm but n.exc 2 Sqm each etc complete all as specified and as directed.

M&L for metal to be welded n exc 6mm in thick for welding in repair nexc 2.5cm in length including cleaning, brushing the welded length applying one coat of red oxide primer, complete all as specified and as directed.

M&L for metal to be welded n exc 6mm in thick for welding in repair exc 2.5cm and nexc 5.0cm in length including cleaning, brushing the welded length applying one coat of red oxide primer complete all as specified and as directed.

M&L for 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints,complete all as specified and directed by Engineer-in-Charge.

S&F 35 mm thick, 2nd class hard wood, plain framed, panelled shutter (any number of panels) with panels of timber flat on both sides (feathered edge ) or of veneered particle board medium density, wood particle board with commercial face veneers, fitted to chowkat complete all as specified and directed.

S&F 35 mm thick, 2nd class hard wood, glazed and skeleton shutter, open rebated and prepared to receive glass or gauge with sash bars of any numbers , divided in to squares and edges of framing plain chamfered or rounded, fitted with cut or mitred beads for securing glass or gauge etc as specified in SSR Part-I section 8 clause 8.24 (a) and fitted to chowkat etc complete all as specified and directed.

M&L 30mm thick 2nd class hard wood factory made glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, for windows and ventilators etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(b) complete all as specified and directed.

S&F 35mm thick flush shutter solid core construction with block board core and plywood face panels, commercial type on both sides conforming to IS-2202 (Part-I), 1983 complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width, stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails, lock rail & bottom rails on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, fixing in the frame at site complete all as specified and directed.

S&F PVC door frame, solid, of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and directed.

S & F Steel window with side hung shutter including projecting type hinges with steel handle and steel peg stay, complete with glazing bars, dove tailed or welded, etc completed all as specified and directed.

S & F Steel ventilator with top hung shutter including hinges, steel peg stay, prepared to receive glass, gauge etc. devided into squares complete all as specified and directed.

S&F Anodised aluminium frame for doors,windows, ventilators, with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F Anodised aluminium window and ventilator shutters, fixed type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and upto the entire satisfaction of Engineer in charge.

S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and upto the entire satisfaction of Engineer in charge.

S&F in repairs door closer hydraulically regulated aluminium (die cast) body, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. Make :- Hardwyn / Godrej / Doorset

S&F 5mm thick mild steel Flat as hold fast and similar small articles conforming to Fe-290 Gde-E-165 etc complete all as specified and as directed.

M&L PCC 1:3:6 type C1 (using 20 mm graded crushed stone aggregate) as in bed plates, filling in pressed steel door frames, hold fast blocks etc, complete all as specified and directed.

M&L for cutting holes in brick walls exc. half brick thick but not exc. one brick thick, built in cement mortar for inserting holdfasts (depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall) and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed.

M&L for cement mortar 1:6 for forming jambs, etc. to openings including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete, all as specified and directed by Engr-in-charge.

S&F Mild Steel Butt hinges, medium weight, cold rolled, 100mm size ISI Marked complete all as specified and directed.

S&F in repairs Mild Steel Butt hinges, medium weight, cold rolled, 100mm size ISI Marked complete all as specified and directed.

S&F Mild Steel Butt hinges, medium weight, cold rolled, 75mm size ISI Marked complete all as specified and directed.

S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width offlaps (when open) 40mm, complete all as specified and directed.

S&F 150mm size MS pressed handle oval type stove enamelled black, ISI marked, complete all as specified and directed.

S&F 100mm size MS pressed handle oval type stove enamelled black, ISI marked, complete all as specified and directed.

S&F in repair tower bolts, mild steel, 200mm size, barrel type of stone enameled black with bright bolt, ISI marked, complete all as specified and as directed.

S&F tower bolts, mild steel, 150mm size, barrel type of stone enameled black with bright bolt, ISI marked, complete all as specified and as directed.

S&F tower bolts, mild steel, 100mm size, barrel type of stone enameled black with bright bolt, ISI marked, complete all as specified and as directed.

S&F 250mm long Mild steel sliding door bolt, plate type stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate ISI marked, complete all as specified and directed.

S&F 300 mm, ordinary mild steel rat tail rod pattern with helical door springs and including roller and roller plate complete all as specified and directed.

S&F in repair mortice lock, vertical type, size 100 mm four lever of brass fixed in position with smooth operation complete all as specified and directed.

S&F 150mm long aluminium, anodised, barrel tower bolt of extruded section and fixed complete all as specified and directed.

S&F 150 mm long extruded Aluminium anodised handles fabricated type and fixed complete all as specified and directed.

S&F in repair Mild Steel Butt hinges, medium weight, cold rolled, 75mm size ISI Marked complete all as specified and directed.

S&F 75mm hasp and staple, safety type, aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F Magnetic Catcher and connected plate to shutters and frame fixed in position complete all as specified and directed by Engr-in-charge.

S&F in repairs GI mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed

S&F GI mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed

Hacking out old broken glass (any thickness size quality or description) from wooden pane glazed with putty or fixed with wooden bends complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality & glazing with oil putty or fitted with beads in squares n.exc. 0.50 sqm in each pane complete all as specified and directed.

S&F 3mm thick glass one side frosted, glazing with oil putty or fitted with beads in squares n.exc. 0.50 sqm in each pane including fixed with wooden beads / glazing pins or spring clips in wooden or metal frames complete all as specified and directed.

S&F 4.80mm thick glass one side frosted, glazing with oil putty or fitted with beads in squares n.exc. 0.50 sqm in each pane including fixed with wooden beads / glazing pins or spring clips in wooden or metal frames complete all as specified and directed.

M&L for 3 mm thick and 38 mm wide glass dividing strips inserted in position, conform to design complete all as specified and directed.

S&F 140 mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&Fin repair 140 mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

M&L for 2nd class hard wood in scantling, clean sawn, timber fixed with nails including dismantling of timber scantling over 40 Sqcm in section in any position (unframed work) complete all as specified and as directed.

Dismantling timber scantlings in fillets, rails, posts, rafters, purlins etc. under 40sqcm in section of unframed work complete all as specified and as directed.

M&L for 2nd class hard wood Plain fillets bullnosed,splayed, chamfered or rounded on one edge or face in section clean sawn, fixed with screws, sectional area nexc 3Sqcm complete all as specified and as directed.

M&L for 2nd class hard wood Plain fillets bullnosed,splayed, chamfered or rounded on one edge or face in section clean sawn, fixed with screws, sectional area exc 3Sqcm but n.exc 6Sqcm complete all as specified and as directed.

M&L for 2nd class hard wood Plain fillets bullnosed,splayed, chamfered or rounded on one edge or face in section clean sawn, fixed with screws, sectional area exc 6Sqcm but n.exc 13Sqcm complete all as specified and as directed.

M&L for 2nd class hard wood Plain fillets square, rectangular or triangular in section , clean sawn, secured with nails or beads, sectional area exc 13Sqcm but n.exc 25Sqcm complete all as specified and as directed.

M&L for 2nd class hard wood, 30 mm thick boarding, planed one side with butt joints fixed with nails as in boarding in floors and skirting etc. including dismantling of boarding of any description complete all as specified and directed.

M&L for 2nd class hard wood, 20 mm thick boarding, planed one side with butt joints fixed with nails as in eaves board including dismantling of boarding of any description complete all as specified and directed.

Supply & fixed in repairs for timber frame-work 18/19 mm thick block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work completed all as specified and directed.

Dismantling Wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 (Gde-E-165) complete all as specified and directed.

S&F in repair 12mm thick (7 Nos ply) ply wood, Type BB(with BWR), fixed in position complete, all as specified and as directed by Engr-in-charge.

S&F in repair 4mm thick (3 Nos ply) veneered decorative plywood, grade 1(with BWR resin) with decorative face veneers on one faces; fixed with screws to timber frame work in position complete, all as specified and as directed by Engr-in-charge.

S&F false ceiling of Non asbestos fibre decorative cement building boards, manufactured from homogeneous mixture of cement, quartz and cellulose and cured with high pressure steam using auto claving process confirming to IS-14862, of size 605 mm x 605 mm x 4 mm thick fixed over and including anodised aluminium powder coated (minimum thickness of powder coating 50 micron) snap grid frame work of T section (main & cross member) of size 25 mm x 25 mm x 1.5 mm thick in square pattern of grid size 605mm X 605mm. The aluminium frame work will supported on side wall with the used of aluminium 'L' section of size 25 mm x 25 mm x 1.5 angles etc. Snap grid shall be supported with hangers of 4 mm dia. Galvanised iron wire adjusting level fixed to roof slabs / truss etc by means of ceiling cleats made out of Galvanised iron flat of size 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long including dismantling wall & ceiling boards of any description including cover fillets complete all as specified directed by the Engineer-in-Charge.

S&F 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/ GI/ Aluminium framework with nails as in ceiling, including dismantling wall and ceilling boards of any description insulation boards/ slab/blankets, any thickness including cover fillets complete all as specified and directed.

M&L for preparation of new steel surfaces of any description and girth over 10cm otherwise described and applying two coats synthetic enamel paints over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of wood or wood based materials new surfaces of any description and girth over 10cm otherwise described and applying two coats synthetic enamel paints over a coat of pink primer complete all as specified and directed.

M&L for Synthetic enamel paint two coats over a coat of pink primer on new wooden surfaces n.exc.10cm width or girth including necessary preparation of wooden surfaces complete all as specified and as directed.

Demolition of Cement Concrete (unreinforced) of any description in any position not otherwise specifically provided for etc complete all as specified and as directed.

M&L for 40mm thick PCC, type B1, (1:2:4, using 20 mm graded stone aggregates) , as in flooring and paving etc finished cement concrete even and smooth with using extra cement complete all as specified and as directed.

M&L for 75mm thick PCC, type C-2, (1:3:6, using 40 mm graded stone aggregates) as in plinth protection and finishing the cement concrete surfaces even and smooth with using extra cement complete all as specified and as directed.

M&L for 75mm thick PCC, type B2, (1:2:4, using 40 mm graded stone aggregates) as in floor , hardstanding, and pathway and finishing the cement concrete surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for Plain Cement Concrete, type C-2, (1:3:6, using 40 mm graded stone aggregates) as in surface channel and drain including Formwork complete all as specified and as directed.

M&L for extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc all as specified and directed.

M&L for Non-skid ceramic colour tiles 7 to 8 mm thick, (square/ rectangular), area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15 mm thick screed bed in cement sand mortar 1:4 including dismantling floor/ hearth or wall tilling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off premises complete all as specified and as directed.

M&L for Non-skid ceramic colour tiles 7 to 8 mm thick, (square/ rectangular), area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15 mm thick screed bed in cement sand mortar 1:4 including dismantling floor/ hearth or wall tilling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off premises complete all as specified and as directed.

M&L for Glazed ceramic colour tiles of size 300 x 200 x 7mm thick in vertical surfaces of wall such as skirting , dado, riser etc set and jointed with neat cement slurry and pointed in white or colour cement to match with the colour of tile over and including 10 mm thick backing course in cement sand mortar 1:4 including dismantling floor/ hearth or wall tilling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off premises complete as specified and directed.

M&L for Glazed ceramic colour tiles of size 450 x 350 x 7mm thick in vertical surfaces of wall such as skirting , dado, riser etc set and jointed with neat cement slurry and pointed in white or colour cement to match with the colour of tile over and including 10 mm thick backing course in cement sand mortar 1:4 including dismantling floor/ hearth or wall tilling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off premises complete as specified and directed.

Demolition of stone slabs and granite laid, bedded and pointed in any mortar of any description or thickness in floors, appron, cill or platform etc. complete, all as specified and as directed.

M&L for Machine cut kota stone slab flooring 20 - 25mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and 20mm thick screed bed in CM 1:3 including roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and as directed.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with 10mm thick backing course in CM 1:4 including roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed.

M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including and over 15 mm thick screed bed or bedding in layer in cement sand mortar 1:4, laying floor finishes finished fair and even complete as specified and directed.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situation, complete as specified and directed.

Demolition of brick or stone boulder masonry, precast concrete block walling in any position built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L Block masonry with solid precast cement concrete blocks made out of cement concrete 1:3:6 type C1, using 20 mm graded stone aggregate, exc 10 Cm width and setting in cement sand mortar 1:6 complete all as specified and directed.

Demolition of reinforced cement concrete in ground floors and pavings nexc 15cm thickness (below or above ground level) complete all as specified and directed

M&L for precast cover slab RCC 1:2:4 type B1 using 20mm graded stone aggregate in CM (1:6) including necessary formwork complete all as specified and as directed.

M&L for Mild steel TMT deformed bars, 10 mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality confirming to Fe 500D complete all as specified and directed by Engineer in Charge.

S&F 0.63 mm thick galvanised corrugated iron (CGI) sheeting with two corrugation side lap, sheets having ZInc coating @120 gram/Sqm inclusive both sides, fixed with GI coach screws/ 'J' type hook or 'L' type hook and washers as in roof covering etcincluding dismantling any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed complete all as specified and directed.

Refixinf only 0.63 mm thick galvanised corrugated iron (CGI) sheeting with two corrugation side lap, sheets having ZInc coating @120 gram/Sqm inclusive both sides, fixed with GI coach screws/ 'J' type hook or 'L' type hook and washers as in roof covering etcincluding dismantling any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed complete all as specified and directed.

S&F 0.63 mm thick plain galvanised iron (PGI) sheets having ZInc coating @120 gram/Sqm inclusive both sides as in ridges, hips, valley gutter, drip, straight flashing etc, fixed in any pattern with coach screws or self tapping screws including dismantling any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed complete all as specified and directed.

S&F in repair Vitreous china wash hand basin, white, flat back of size 550 mm x 400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia, PVC flexible waste pipe of adequate length and dia and PVC connection 15mm size 450mm length with PTMT nuts, complete all as specified and as directed .Make:- Prayag / Hindware/ Jaquar & Company Pvt Ltd/ Cera (Ist Quality)/ Parryware

S&F in repair 15 mm bore Pillar tap , fancy type cast copper alloy, with capstan heads chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S & F in repair 15 mm bore CP fancy type bib tap chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair 15mm bore stop cock fancy type, chromium plated , screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and directed.

S&F in repair Bib tap of 15mm dia in PTMT of any colour high pressure screwed for iron pipe and fixed. (Minimum weight 90 gms) complete all as specified and as directed.Make:- Prayag / Hindware/ ESSCO/PARCO

S&F in repair Stop Valve of 15mm dia in PTMT of any colour high pressure screwed for iron pipe and fixed. (Minimum weight 90 gms) complete all as specified and as directed.Make:- Prayag / Hindware/ ESSCO/PARCO

S&F in repair for grating doom 100 mm dia of PTMT (minimum weight 25gms) complete all as specified and directed.Make:- Prayag / Hindware.

S&F in repair vitreous China wash down (EWC) water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) but including plastic water closet seat cover closed pattern with flat bottom and cover with PVC hinge device, fixing bolt for pedestal pattern complete all as specfied and directed. Make:- Prayag / Cera / Hindware.

S&F in repair Vitreous china squatting pan of Orissa Pattern of size 580x 440 mm white with ‘P’ or ‘S’ trap , front or back inlet but excluding flushing cistern and flush pipe including placing in position in floor and embedded in cushion of PCC type E2 ( using 40 mm graded crushed stone aggregates), 1:5:10 and finishing the top surfaces to match with the existing flooring complete all as specified and as directed .Make:- Prayag / Cera / Hindware.

S&F in repair PVC (Plastic polymer Cistern) valve less, Symphonic action type, flushing cistern of capacity 10 litres, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete all as directed by Engineer-in-Charge .Make:- Prayag / Hindware.

S & F in repairs 450 mm long PVC connection with two Nos. PTMT nuts internally threaded and PVC washer suitable for 15 mm bore pipe line complete all as specified and directed.

S & F in repair 110mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint fixed to walls/ Floors including pvc clamps for securing pipe etc complete all as specified and directed.

S & F in repair 75mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint fixed to walls/ Floor including pvc clamps for securing pipe etc complete all as specified and directed.

S & F in repair 110mm bore PVC (SWR) bend with access door of any radius jointed with solvent cement and rubber ring joint fixed, complete all as specified and directed.

S & F in repair 110mm bore PVC (SWR) reducer complete all as specified and directed.

S & F in repair 75 mm bore PVC (SWR) vent cowl complete all as specified and directed.

S & F in repair 110 mm bore PVC (SWR) Junction, single (Single 'T') equal or unequal complete all as specified and directed.

S&F PVC gutter, Half round 180mm size fixed on support brackets at any height complete all as specified and as directed.

S&F Joint Bracket (with 2 clamps), 180mm for PVC pipes (Half round) complete all as specified and as directed.

S&F support Bracket 180mm for PVC pipes (Half round) complete all as specified and as directed.

S&F running outlet (with 2 clamps) 180mm for PVC pipes (Half round) complete all as specified and as directed.

S&F stop end outlet (with 1 clamp) 180mm for PVC pipes (Half round) complete all as specified and as directed.

S&F in repairs 20 mm dia curtain rod, mild steel, chromium plated with & including suitable fixing CP brackets / clamps & corners to be fixed at ends etc. with necessary screws complete all as specified and directed.

S&F in repairs sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf, size not less than 120 mm wide & 600 mm long, with chromium plated bracket guard and railing complete all as specified and directed.

S&F in repairs corner glass shelf assembly consisting of 5.5 mm thick sheet glass shelf, 300mm side with brass chromium plate bracket guard complete all as specified and directed. Make: Jaquar/Prayag Polymer Pvt Ltd / Essco

S&F in repair towel rail, 18 mm (minimum) dia & 600 mm long of stainless steel chromium plated, fixed with and including chromium plated brass screws and wooden/ plastic cleat complete all as specified and directed.

S&F in repairs sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915 x 460mm bowl size 410 x 330 x 160 mm complete all as specified and directed.

S&F in repairs sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495 x 420mm bowl size 410 x 330 x 160 mm complete all as specified and directed by Engineer in Charge. Make: Bluestar, Nirali or equivalent.

S&F in repair stainless steel kitchen rack including fixing cantilever brackets or fixed to wall with wall plug, screws and washers, overall size 900 x 900 x 250 mm complete all as specified and directed.

Taking up or down steel tubing with connections of 15mm bore pipe including cleaning for refixing or removal from site with all fittings complete all as specified and directed.

S&F GI tubing 15 mm dia medium grade with all fittings fixed in wall, ceiling or laid under floor with necessary clamp or hook complete all as specified and as directed.

Refixing only GI tubing 15 mm dia medium grade with all fittings fixed in wall, ceiling or laid under floor with necessary clamp or hook complete all as specified and as directed.

Taking up or down steel tubing with connections of 20 mm bore pipe including cleaning for refixing or removal from site with all fittings complete all as specified and directed.

S&F GI tubing 20 mm dia medium grade with all fittings fixed in wall, ceiling or laid under floor floor with necessary clamp or hook complete all as specified and as directed.

Refixing only GI tubing 20 mm dia medium grade with all fittings fixed in wall, ceiling or laid under floor floor with necessary clamp or hook complete all as specified and as directed.

M &L for Cutting chases, pinning in concrete block work, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of white or tinned cement base paint over primming coat on exterior wall complete all as specified and directed by Engr-in-charge.

M&L for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M&L for preparation of new surfaces of ceiling of any description and applying two coats of white wash complete all as specified and directed.

M & L for preparation of old decorated surfaces of walls (plastered or unplastered) and cornices, by brooming down, scrapping down smoke soot, moss and efflorescent salts and trading oil and greasy spots etc and applying two coat of white wash on walls complete all as specified and as directed.

M&L for preparation of newly or previously undecorated plastered surface and applying oil bound distemper two coats of approved shade over one coat of compatible wall primer over and including 2mm thick wall care putty to achieve smooth surfaces complete all as specified and as directed by Engineer-in-Charge.

M&L for preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with two coats creosote oil complete all as specified and directed.

M&L French polish, one coat over old wooden painted surfaces of any description over 10 Cm width or girth including necessary preparation of old surfaces with a coat of wood filler with two or more coats complete all as specified and as directed.

S&F Rotational moulded HDPE polyethylene 500 ltrs capacity water storage tanks three layered, (ISI marked) (cylindrical vertical with closed top) hoisted and fixed in position in SSR 2009 Part-I including ball valves 20mm dia high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball including 20mm dia GI medium grade over flow pipe, approx lenght 1.5 mtr, 25 mm dia wash out pipe with pluged at one end including dismantling old unserviceable one complete all as specified and directed.

S&F Rotational moulded polyethylene 1000 ltrs capacity water storage tanks , three layered, (ISI marked) (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball valves 20mm dia high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball including 20mm dia GI medium grade over flow pipe, approx lenght 1.5 mtr, 25 mm dia wash out pipe with pluged at one end including dismantling old unserviceable one complete all as specified and directed.

S&F in repair 20 mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm - 21 0gms) complete all as specified and directed.

M/s SS Engineering

M/S UTTAM SAHA