PROPOSED PROCESSING AND VALUE ADDITION CENTRE FOR MILLETS AT CHITTAPURE, KALABURAGI FOR KARNATAKA STATE AGRICULTURE DEPARTMENT,AT KALABURAGI

PROPOSED PROCESSING AND VALUE ADDITION CENTRE FOR MILLETS AT CHITTAPURE, KALABURAGI FOR KARNATAKA STATE AGRICULTURE DEPARTMENT,AT KALABURAGI

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Earthwork excavation ( in deposited soil ) and filling sides of foundation upto plinth in layers not exceeding 20 cms. in depth, compacting each deposited layer by ramming after watering with lead up...

Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour wit...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in position Reinforced/ Plain cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m t...

do for Column Footings / Retaining Wall Footings / Raft / Base Slab

do for Plinth Beam with M-25

do for Column with M-25.

do for Tie Beam with M-25

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming...

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of...

Providing & fixing SS fly proof wire gauze to windows, clerestory windows & doors to exsisting aluminium frame. Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both si...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...

Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the ...

Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), c...

Vaccum de-watering with vaccum pump and suction mat and compaction with skin floater clubbed with floating disc including cost of generator, HOM of machinery, Screed Vibratory, Power Floater, blade an...

Cutting transverse contraction joints 3 to 4 mm wide and depth 60mm in concrete slab using concrete cutting machine with diamond studded saw within 4-8 hours of casting of bay / slab etc. complete inc...

Providing to contraction joints polysuphide sealent (Pouring grade) confirming to BS : 5212 - 1989 into sawed groove widened at top for sealent reservoir of specified size and shape as per detailed dr...

Providing & adding approved make Floor hardner in flooring as per details.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal exp...

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required...

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture i...

Providing and laying Cement concrete pavement with 1:2:4 for commercial & residential building floors, hardpaths, footpaths using 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size...

Providing & fixing All Primary steel including Rafters, Columns shall be Built up Sections made out of plates having a minimum yield strength of 345 Mpa. Grade 50 conforming to ASTM A 572 including pr...

Providing & fixing All M.S.Secondry structural Frame including Purlins, Girts shall be made out Cold Formed steel of min yield strength of 250 Mpa including providing & painting 2 coats of anticorrisi...

Providing & fixing High tension foundation Bolts & nuts of various sizes including foundation bolts at column bases, excluding cost of concrete.fixing to be done by civil contractor under the supervis...

Providing & grouting below m.s. columns using GP2 or Equivalent approved make grout as per manufacturers instructions, 50 to 60mm (Max) thick.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g...

do For GI Sheet Cladding

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy prim...

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy prim...

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy prim...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...

Dump Hopper with Elevator

Capacity: Suitable for 500 kg/hr plant

Function:Receving the raw material (Millets, grains) in hopper & transfer vertically to multigrain cleaner cum grader.

Dump Hopper:Dump...

Vibro-Grader cum cleaner with Aspirator

Capacity: 500kg/hr

Function: Effective cleaning and grading of grains, millets as mentioned above.

The unit shall be motor driven with automatic sieve cleanin...

Vibro De-stoner:

Capacity: 500kg/hr

Function: To effciently separate stones, metal, glass & other high density impurity from the stream of millet/grains.

It shall have oscillating housing with exhaust...

Minor Millet Immature separator

Capacity: 500 kg/hr

Function: To efficiently separate the immature & good grains/millets based on gravity.

The blowers fans shall be provided to dynamically balance & ...

Minor Millet De-huller:

Capacity: 500 kg/hr

Function: TO separate hus/seed coat from all types of millets,grains as metnioned above.

The unit shall have VFD drive and suitable arrangement to separate ...

Capacity: 500 kg/hr

Function: To efficiently separate the immature & good grains/millets based on gravity.

The blowers fans shall be provided to dynamically balance & adjust air control...

Minor Millet Broken Separator

Capacity: 500 kg/h

Construction Material: Stainless steel 304 & Mild steel HR/CR

Motor: Induction motor

Bucket Elevators

Function: To transfer millet/grains vertically.

Elevator shall have food grade belts/buckets, caged drum at boot to avoid product breakage and vulcanized drum at the head to avoid bel...

Electrical Control Panel, Power & COntrol Wiring and earthing

Electrical control panel shall be manufactured as per specifications and approved GA drawings.

The Panel shall be comprising of following:...

Providing fabricationg and erecting in position Structural Steel (channels, angles etc), for Machine frame/supports / structure etc. including straightning, cutting, drilling, bending, welding, reveti...

Total plant sprouting ducting, hoppers, consumables including suitable pipes,bends,inspection spouts, two-way Y diverters, manual or pneumatic slide gates, diverters, cones, inlet & outlet hoppers etc...

Accessories for turnkey installation of plant including rotary air locks,cyclons,fans & blowers and others as may be required for smooth functioning of different machinery & production of good quality...

Installation, testing and commissioning of all above equipment / material FOR MILLET PRIMARY PROCESISNG LINE as per the system requirement. All tools and tackles, welding machines, welding rods and ga...

Weighing Machine with pole display 10 KG / 1 GM / SS / 300 x 400 MM

Weighing Machine with pole display 100 KGS / 20 GM / SS / 600 X 600 MM

Sealing length: 300mm

Sealing Width:3mm

BATCH COADING MACHINE- HANDHELD TYPE MANUAL

HAND BAG STICKING / BAG CLOSER MACHINE 1/10 HP

Main panel '(As per dwg no. MP/PECS-2507/EL-SCH-01)

6 Way TPN MCB DB

1 No. 32A 4P RCCB 100mA + 32A TPN MCB

18 nos. of 6/10A SP MCBs

8 Way VTPN MCB DB

1 No. 40A 4P RCCB 300mA + 40A TPN MCB

14 nos. of 6/10/16A SP MCBs

3 nos. of 16A TP MCBs

Al. cable 3.5C X 35 Sq.mm arm.

Al. cable 4C X 16 Sq.mm arm.

Al. cable 4C X 10 Sq.mm arm.

Al. cable 4C X 6 Sq.mm arm.

Al. cable 4C X 4 Sq.mm arm.

Al. cable 3C X 10 Sq.mm arm.

PVC 3.5 X 35 sq. mm (28mm)

PVC 4 X 16 sq. mm (28mm)

PVC 4 X 10 sq. mm (25mm)

PVC 4C X 6 sq. mm (25mm)

PVC 4C X 4 sq. mm (22mm)

Hot Dipped Galvanized Iron perforated cable trays 50 mm (W) x 50mm (H) with cover

Hot Dipped Galvanized Iron perforated cable trays 100 mm (W) x 50mm (H) with cover

Hot Dipped Galvanized Iron perforated cable trays 200 mm (W) x 50mm (H) with cover

Hot Dipped Galvanized Iron perforated cable trays 300 mm (W) x 50mm (H) with cover

Hot Dipped Galvanized Iron perforated cable trays 400 mm (W) x 50mm (H) with cover

Supply and fixing of conduit / structural steel support ceiling suspended type / wall bracket type clamps with necessary saddles for fixing of conduits / cables, cable trays and where ever necessary. ...

Short point upto 3m

Medium point above 3 mtrs upto 6 mtrs.

Long point above 6 mtrs upto 10 mtrs.

Two in a row above 3 mts upto 6 mtrs from tapping point to outlet via switch box

CIRCUIT MAIN / POWER MAIN / SUBMAINS : 2x1.5 Sqmm +1x1.0 Sqmm PVC Insulated wires drawn in 20mm dia PVC conduit for additional length of point wiring.

CIRCUIT MAIN / POWER MAIN / SUBMAINS : 2 x 2.5 Sqmm + 1 x 1.5 Sq mm PVC Insulated wires drawn in 20 mm dia PVC conduit

CIRCUIT MAIN / POWER MAIN / SUBMAINS : 2 x 4 Sqmm + 1 x 2.5 Sq mm PVC Insulated wires drawn in 20 mm dia PVC conduit

CIRCUIT MAIN / POWER MAIN / SUBMAINS : 2 x 6 Sqmm + 1 x 4 Sq mm PVC Insulated wires drawn in 32 mm dia PVC conduit.

CIRCUIT MAIN / POWER MAIN / SUBMAINS : 4 x 2.5 Sqmm + 2 x 1.5 Sq mm PVC Insulated wires drawn in 25 mm dia PVC conduit

CIRCUIT MAIN / POWER MAIN / SUBMAINS : 4 x 4 Sqmm + 2 x 2.5 Sq mm PVC Insulated wires drawn in 25 mm dia PVC conduit

CIRCUIT MAIN / POWER MAIN / SUBMAINS : 4 x 6 Sqmm + 2 x 4 Sq mm PVC Insulated wires drawn in 32 mm dia PVC conduit.

CIRCUIT MAIN / POWER MAIN / SUBMAINS : 4 x 10 Sqmm + 2 x 6 Sq mm PVC Insulated wires drawn in 40 mm dia PVC conduit.

CIRCUIT MAIN / POWER MAIN / SUBMAINS : 4 x 16 Sqmm + 2 x 10 Sq mm PVC Insulated wires drawn in 40 mm dia PVC conduit.

powder coated metal box 1 to 2Way

powder coated metal box 3 Way

powder coated metal box 4-5 Way

powder coated metal box 6 Way

modular switch mounting polycarbonate plate 1 to 2 module

modular switch mounting polycarbonate plate 3 Module

modular switch mounting polycarbonate plate 4 module

modular switch mounting polycarbonate plate 6 module

A. 6Amps one way switch.

B. 6Amps 3way socket.

C. 16Amps one way switch

D. 6/16Amps universal socket

interlocked switched socket 16A, 3P+N+E, 3- phase socket with plug top

interlocked switched socket 16A, 2P+E, 1- phase socket with plug top

interlocked switched socket 120W LED, IP65 Industrial, High bay light fixture of type LHB11-120-CDL/60-M of CG make/equivalent.

interlocked switched socket 10W LED, bulk head light fixture of type LBHE-10-CDL of CG make/equivalent.

Fixing all types and all capacities fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling/ rafters / girders using 23/0.0076” twin twisted PVC insulated wires, ...

Supply and fixing of heavy duty oscillation type propeller fan available with impeller consisting of 3 blades in bracket type, column /wall mounted, 450mm sweep, 1-Phase, of Havells make/equivalent.

Supply , installatin, testing & commsioining of 1000CFM heavy duty exhaust air fan with bracket blades suitable to operate on 250v 50hz,ac supply including should have louvers and Steel Mesh to avoid ...

Supplying, fixing and wiring earth electrode for grounding of Lifts, Transformers, DG sets etc., Using 40 mm dia 2.9mm thick 2.5mtrs long GI pipe with GI funnel with mesh and suitable size reducer fi...

Supplying and running of GI strips for grounding connections, using necessary fixing materials as required - 25x3mm GI strip

Supplying and running of GI strips for grounding connections, using necessary fixing materials as required - 25 x 6 mm GI strip

Supplying and running of GI strips for grounding connections, using necessary fixing materials as required - 8 SWG, GI Wire

PVC Conduit 20mm dia

PVC Conduit 25mm dia

PVC Conduit 32mm dia

Inside size of 450 x 450 mm depth not exceeding 600mm including providing 450 x 450mm RCC cover.

RCC cover 750mm x 750mm x 900 mm depth with 750x750mm

Supply & Laying of rubber mats of 11kv grade, 1.8.mtr. x 0.9mtr X 2.5mm (thick) and of sufficient thickness as required by the Electrical Inspectorate and confirming to IS 15652

Providing rubber gloves of electrical quality tested to 11 KV.

Fixing of first Aid box containing medicines for 50 persons to give first aid treatment.

Supply and fixing in position approved shock treatment chart written in English, Hindi and local language. The chart shall be framed in teakwood frame and covered with glass.

Supply & Fixing of DANGER / NO ADDMISSION. / NO SMOKING / Board made out of MS sheet metal with 2 coats of non-corrosive enamelled paint of approved shape and size as specified by local electric...