Dismantle and Erection of 02 No. 220 KV Double Feeder Control Panel and 01 No. 220 KV Feeder Relay Panel at 220 KV SUBSTATION BARAHUWA GKP

Amount

Following works to be done for replacement of old Feeder Control Panel at 220 KV S/S BARAHUWA,GKP Detail of feecder is given below 1. 220 KV TANDA FEEDER 2. 220 KV KHORABAR CKT 3. 220 KV MOTIRAM ADDA CKT

Dismantaling of old and used Feeder Control Panel at 220 KV S/S BARAHUWA,GKP by opening of side nut, bolts, earthing,grouting nuts and bolts and shifting from Ist floor control room to ground floor 1 and shift the control panel from ground floor to JE store with the help of hydra /cane (distance approx 300 mtr.)and placing in place of old Panel.(01 Job for each feeder)

Safe shifting of new 220 KV Feeder Control Panel at 220 KV S/S BARAHUWA, GKP from Je store to ground floor of control room and shifting panel from ground floor to Ist floor of control room with the help of hydra/crane and Erection of Panel including cutting of floor /chequrred plates of panel.

Laying of following size PVC unarmoured copper between 220 KV CT, CB, DCDB, ACDB, and associated Marshalling Boxes to control/relay panels and also from equipment control cubicles to their JBs as per direction of supervising engineer after opening of cable trenches and placing trench cover originally after shifting cable drum from store& reuring balance cable back to store

2C X2.5 sq. mm

4C X2.5 sq. mm

6C X 2.5 sq.mm

10C X 2.5 sq. mm

Termination of following size of cables as laid per cable schedule including making necessary holes in gland plate, fixing of cable gland, wire ferrule and copper lugs of proper size then termination as per cable schedule with all cost of men and T&P for completion of job(01 Job for each feeder)

Earthing of control panel with existing earth strip as required with the help of welding machine(MS FLAT 25X06 mm or 50x 06 mm will be provided by department

K. D AND GUPTA ELECT. AND ENGG. WORKS

Ojas Enterprises